MAX RAT.:100 mW WORK. TEMP.:-40°C - +80°C

MAX RAT.:100 mW WORK. TEMP.:-40°C - +80°C

BUSHING:brass THREADED COLLET:nylon HOLE DISTANCE:2,54 mm NUT:chrome pl. brass PANEL CUTOUT:Ø 8 mm

Material:ABS Dimensions: 21,5x12x2 mm. Metal sheet thickness: 0,8-3,2 mm.

Features: Material: tinned brass Color: red Max. rating: 10A

Features: Material: tinned brass Color: yellow Max. rating: 24A

Features: Material: tinned brass Color: red Max. rating: 19A

Features: Material: tinned brass Max. working temperature: 110°C Cable diameter: 0,30-0,80 mm.

Insertion from behind. Features: Material: natural polyethylene Insulator diameter: 2,5mm.

Features: Contacts: nickel brass Rated voltage: 250V. Nominal current: 16.000A

Flame retardant and resistant to solvents and chemical agents. Flexible and highly insulated. Many useful applications including terminal connections, electrical insulation, mechanical protection, wire identification and color coding. Features: Shrink fact: 2:1 Material: polyolefin Shrink temperature: 120°C Work temperature: -40° - 135°C Restrict diameter: 1,6mm. Normal diameter: 3,2mm.

Features: Voltage: 250V. Material: phenolic material Current: 0,5A

Features: Material: natural brass

Features: Material: pvc Color: natural

Material:ABS Dimensions: 25,3x12,7x2 mm. Metal sheet thickness: 0,8-3,2 mm.

System to stop the water in-let.. Electronic dedicated PCB. Technical features: - Voltage: 24V or 36V. - Vetronite plate. - Sensor dipped in gold. - C

3-ways solenoide valve, with body in food grade resin and membrane in platinic silicone 3/4" x 1/4". Flow rate: 6,7 Lt./Min. - 3,5bar. Nominal pressure: 10bar. Voltage: 220V. - AC Voltage: 24V. - DC

1-way solenoide valve with body in food grade resin membrane in platinic silicone 3/4"x1/4" Flow rate: 2,5 Lt./Min. - 2,5bar Nominal pressure: 10bar

Normally closed.

The FS-2000(H) flow sensor comes with a reed switch or Hall effect switch which delivers a switch signal or digital signal to electronic control unit when it is activated by the magnetic force of the flow sensor turbine. It can detect water flow from 1.7 to 14.1 L /min. The connection of the FS-2000(H) is 3/ 8” NPT female. Its body and turbine are made of acetal copolymer (POM) material. The best location to connect the FS-2000(H) is on the outlet channel of the filter. Because it's sensitive to rust an

Flow restrictor for RO membrane. These flow restrictors has to be connected to the drain tube and their function is to allow the RO membrane to work in the best pressure conditions. Available in a wide range of flow rate (from 300cc to 1000cc) and with 1/4" quick fit or 1/4" female threaded.

Pressure: 0 - 10 bar

The rotary vane pumps Fluid-o-Tech are volumetric pumps designed for pumping water and moderate aggressive liquids with low flow at high pressure. Technical features The rotary vane pump is brass made with a stainless steel AISI 303 rotor, while the pumping chamber and the vanes are in carbon graphite. The inlet and outlet ports are 3/8" GAS or NPT threaded. The pumps are designed to be directly mounted to the motor with a stainless steel clamp. For different mounting arrangements see our tech