This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

Reverse Osmosis Direct Flow Water Purifiers RO TFC Membranes 800GPD Polypropylene GAC Carbon Block Filters Intelligent Electronic Faucet Water Filtration System Drink More Water

order
other filters

Pressurised accumulator tanks in steel painted blue 10,7 Gal.- 40,6 lt. (1)
Pressurised accumulator tanks in steel painted blue 10,7 Gal.- 40,6 lt. (1)
060050
Features: - Capacity: 10,7 Gal. - 40,6 lt - Diameter: 390mm. - Height: 500mm. - Connection: 1"F. or open/close ball valve with compression fitting
Accumulator tanks in steel 20 Gal.- 76 lt.
Accumulator tanks in steel 20 Gal.- 76 lt.
060051
Diameter: 400mm. Height: 730mm. Connection: 3/4"M.
Anti leak water (sensor + electronic board)
Anti leak water (sensor + electronic board)
060006
System to stop the water in-let.. Electronic dedicated PCB. Technical features: - Voltage: 24V or 36V. - Vetronite plate. - Sensor dipped in gold. - C
Leaking sensor
Leaking sensor
060053
Set: electronic card + box + aquastop sensor
Fast fuse 250V - 5x20mm - 16A. (10)
Fast fuse 250V - 5x20mm - 16A. (10)
04704721
Features: Contacts: nickel brass Rated voltage: 250V. Nominal current: 16.000A
IEC power supply cable - schuko EU plug
IEC power supply cable - schuko EU plug
060070
Cable: 2mt. (3x0,75mm.)
Chassis back plug for hole OD from 15 to 18 mm.
Chassis back plug for hole OD from 15 to 18 mm.
04704713
Material:ABS Dimensions: 21,5x12x2 mm. Metal sheet thickness: 0,8-3,2 mm.
Chassis back plug for hole OD from 18,4 to 22 mm.
Chassis back plug for hole OD from 18,4 to 22 mm.
04704752
Material:ABS Dimensions: 25,3x12,7x2 mm. Metal sheet thickness: 0,8-3,2 mm.
Quick Check TDS/Conductivity Monitor
Quick Check TDS/Conductivity Monitor
060016
Press the "Push-to-Check" button for an instant water quality check. Features - With the push of a button, the unit displays a green or red light, indicating good water quality or service required, respectively. - Tests for TDS or conductivity
In-Line Dual TDS in-out meter monitor for water
In-Line Dual TDS in-out meter monitor for water
060126
Measure the tap water coming in vs. the purified water going out of your water filtration system at any time. Specification: - Range: 0-1999 mg/lt. (ppm); - Resolution: 1mg/lt. (ppm); - Accuracy: ±2% F.S; - Power supply: 4x1,5 V. (AG13); - Automatic temperature compensation: 0-50 °C - Dimensio
Electrolysis system for reverse osmosis test
Electrolysis system for reverse osmosis test
060058
The produced electrolysis process, as well as its viewing, increases intensity and reaction rate depending on the quantity of dissolved salts, among other factors. Water increases its electricity proportionally to the quantity of dissolved salts it contains. Contents of the briefcase: * Electrolysis precipitator * 2 aluminium electrodes * 2 iron electrodes * Transformer *
PM-2 external In-Line TDS Purity Monitor 220V.,110V.
PM-2 external In-Line TDS Purity Monitor 220V.,110V.
060065
An ideal monitor/alert for water coolers and other enclosed water purification systems. Alerts a user when the filtration system requires service. FEATURES * External single line internal TDS monitor that is ideal for most water purification systems. * Includes a light and optional alarm that alerts the user service is required when the TDS level reaches the pre-programmed set-point. * User-defined set points (any even number between 2 and 200). SPECIFICATIONS * Range: 0-200 ppm (mg/L) * Accuracy: +
Booster pump 800GPD, 230V - 50/60Hz - 5/16" quick-fit - Short Version (6)
Booster pump 800GPD, 230V - 50/60Hz - 5/16" quick-fit - Short Version (6)
060140
Features: Nominal Voltage: 230VAC; Frequency: 50/60Hz; Inlet Pressure: 0,2MPa; Working Pressure: 0,7MPa; Working current: 0,55A; Maximum current: 0,80A; Working Flow: 4LPM; Bypass pressure: 1,05~1,2 MPa; Water Temparature: 38°C; Dimensions: 189x98mm.
111 products found - 4 pages
|< <<
1234
>> >|

www.sinergroup.it Everpure Filters