This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

2-Way faucets star handles reverse osmosis microfiltration water purifier filtration softeners

07001023.jpgHome
 » 
In line filters
 » 
Sediment In line filters
order
other filters

Ionicore IC-10SE Sediment in line filter 1/4" FPT 2"x10" - 5 micron (25)
Ionicore IC-10SE Sediment in line filter 1/4" FPT 2"x10" - 5 micron (25)
07001022
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter.
details
Service life:
6 months (max. 1 Year)
Flow rate:
0,75 gpm (2,8L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
No branded Filtro in Linea a sedimenti 1/4" FPT 2"x10" - 5 micron (25)
No branded Filtro in Linea a sedimenti 1/4" FPT 2"x10" - 5 micron (25)
07001034
Filtro personalizzabile con etichetta privata, Crea il tuo marchio Offri ai tuoi clienti un filtro con il tuo marchio sopra. Questa linea di filtri neutri no-branded, privi di etichetta, è stata creata appositamente per le aziende che desiderano personalizzare il prodotto con il proprio logo e design grafico. Un filtro con il tuo marchio trasmette professionalità, autorevolezza e prestigio, rafforza la fidelizzazione dei clienti e aumenta il valore percepito del tuo brand. Differenziati dalla concorrenz
details
Service life:
6 months (max. 1 Year)
Flow rate:
0,75 gpm (2,8L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
Filtro in Linea a sedimenti 1/4
Filtro in Linea a sedimenti 1/4
07001029
Utilizzabili come prefiltri in impianti ad osmosi inversa domestica. Riducono sporco, impurità grossolane come ruggine, terra, sabbia, particelle in sospensione. Non rimuovono sostanze chimiche o inquinanti.
details
Service life:
6 months (max. 1 Year)
Flow rate:
0,75 gpm (2,85L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Sediment in line filter 1/4" FPT 2"x10" - 5 micron (25)
Sediment in line filter 1/4" FPT 2"x10" - 5 micron (25)
07001001
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter. Technical Features: Max. Flow: 2,8lpm/0,75gpm * Max. Pressure: 8bar * Max. Temperature: 38°C./100°F.
Ionicore IC-11SE Filtro in Linea a sedimenti 1/4" FPT 2,5"x11" - 5 micron (25)
Ionicore IC-11SE Filtro in Linea a sedimenti 1/4" FPT 2,5"x11" - 5 micron (25)
07001023
Utilizzabili come prefiltri in impianti ad osmosi inversa domestica. Rimuovono sporco, impurità grossolane come ruggine, terra, sabbia, particelle in sospensione. Non rimuovono sostanze chimiche o inquinanti.
details
Service life:
6 months (max. 1 Year)
Flow rate:
0,75 gpm (2,85L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
No branded Filtro in Linea a sedimenti 1/4" FPT 2,5"x11" - 5 micron (25)
No branded Filtro in Linea a sedimenti 1/4" FPT 2,5"x11" - 5 micron (25)
07001033
Filtro personalizzabile con etichetta privata, Crea il tuo marchio Offri ai tuoi clienti un filtro con il tuo marchio sopra. Questa linea di filtri neutri no-branded, privi di etichetta, è stata creata appositamente per le aziende che desiderano personalizzare il prodotto con il proprio logo e design grafico. Un filtro con il tuo marchio trasmette professionalità, autorevolezza e prestigio, rafforza la fidelizzazione dei clienti e aumenta il valore percepito del tuo brand. Differenziati dalla concorrenz
details
Service life:
6 months (max. 1 Year)
Flow rate:
0,75 gpm (2,85L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Filtro in Linea a sedimenti 1/4
Filtro in Linea a sedimenti 1/4
07001028
Filtro in linea per acqua progettato per la rimozione dei sedimenti e delle impurità sospese fino a 5 micron, ideale come stadio di prefiltrazione in impianti di trattamento acqua, microfiltrazione, osmosi inversa e applicazioni beverage. La configurazione con attacchi 1/4" FPT e corpo compatto 2,5" x 11" lo rende una soluzione pratica e versatile per numerose installazioni. Questo filtro aiuta a trattenere particelle come sabbia, ruggine, limo e torbidità, contribuendo a proteggere i componenti installa
details
Service life:
6 months (max. 1 Year)
Flow rate:
0,75 gpm (2,85L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Filtro in Linea a sedimenti 1/4", 3/8" FPT 2,5"x12" - 5, 10 micron (25)
Filtro in Linea a sedimenti 1/4", 3/8" FPT 2,5"x12" - 5, 10 micron (25)
07001002
Utilizzabili come prefiltri in impianti ad osmosi inversa domestica. Rimuovono sporco, impurità grossolane come ruggine, terra, sabbia, particelle in sospensione. Non rimuovono sostanze chimiche o inquinanti. Caratteristiche Tecniche: Portata max: 2,8lpm
CL10 PF5 Filtro in Linea a sedimenti 1/4" FPT 2"x10" - 5 micron (25)
CL10 PF5 Filtro in Linea a sedimenti 1/4" FPT 2"x10" - 5 micron (25)
07001008
Utilizzabili come prefiltri in impianti ad osmosi inversa domestica. Rimuovono sporco, impurità grossolane come ruggine, terra, sabbia, particelle in sospensione. Non rimuovono sostanze chimiche o inquinanti. Caratteristiche Tecniche: Portata max: 1,9lpm
Green Filter Sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (25)
Green Filter Sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (25)
07001004
Sediment removal. Service life: 1 year - 3.000 gal. - 11.340 liters Maximum flow: 1 gpm - 3,78 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 35°F - 2°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Green Filter CS Sediment in line filter 3/8" OD stem 2,5"x10,5" - 5 micron (25)
Green Filter CS Sediment in line filter 3/8" OD stem 2,5"x10,5" - 5 micron (25)
07001005
Sediment removal. Service life: 1 year - 3.000 gal. - 11.340 liters Maximum flow: 1 gpm - 3,78 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 35°F - 2°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
T33 Sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (25)
T33 Sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (25)
07001006
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter. Technical Features: Max. Flow: 2,8lpm/0,75gpm * Max. Pressure: 8bar * Max. Temperature: 38°C./100°F.
Green Filter classic sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (20)
Green Filter classic sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (20)
07001007
Sediment removal. Service life: 1 year - 3.000 gal. - 11.340 liters Maximum flow: 1 gpm - 3,78 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 40°F - 4°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Green Filter sediment in line filter 1/4" J.G. 2"x10" - 5 micron (25)
Green Filter sediment in line filter 1/4" J.G. 2"x10" - 5 micron (25)
07001009
Sediment removal. In/out: 1/4" quick connection Starfit (John Guest type) Service life: 1 year - 2.000 gal. - 7.560 liters Maximum flow: 0,69 gpm - 2,61 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 40°F - 4°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Green Filter filtro in linea a sedimenti 1/4" J.G. 2,5"x11" - 5 micron (25)
Green Filter filtro in linea a sedimenti 1/4" J.G. 2,5"x11" - 5 micron (25)
07001010
Rimozione di sedimenti. In/out: 1/4" innesto rapido Starfit (tipo John Guest) Durata media: 1 anno - 3.000 gal. - 11.340 litri Portata massima: 1 gpm - 3,78 lt/min. Pressione massima: 125 psi - 8,6 bar Temperatura massima: 100°F - 38°C Temperatura mi
Omnipure CL10PF5 Filtro in Linea a sedimenti 1/4" FPT 2"x10" - 5 micron (25)
Omnipure CL10PF5 Filtro in Linea a sedimenti 1/4" FPT 2"x10" - 5 micron (25)
07001011
Utilizzabili come prefiltri in impianti ad osmosi inversa domestica. Rimuovono sporco, impurità grossolane come ruggine, terra, sabbia, particelle in sospensione. Non rimuovono sostanze chimiche o inquinanti.
details
Service life:
max. 1 year
Flow rate:
0,5 gpm (1,9L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Omnipure K5505 Filtro in Linea a sedimenti 3/8" FPT 2,5"x10" - 5 micron (25)
Omnipure K5505 Filtro in Linea a sedimenti 3/8" FPT 2,5"x10" - 5 micron (25)
07001012
Utilizzabili come prefiltri in impianti ad osmosi inversa domestica. Rimuovono sporco, impurità grossolane come ruggine, terra, sabbia, particelle in sospensione. Non rimuovono sostanze chimiche o inquinanti.
details
Service life:
max. 1 year
Flow rate:
0,5 gpm (1,9L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Omnipure K5605 Filtro in Linea a sedimenti 1/4" FPT 2,5"x12" - 5 micron (25)
Omnipure K5605 Filtro in Linea a sedimenti 1/4" FPT 2,5"x12" - 5 micron (25)
07001013
Utilizzabili come prefiltri in impianti ad osmosi inversa domestica. Rimuovono sporco, impurità grossolane come ruggine, terra, sabbia, particelle in sospensione. Non rimuovono sostanze chimiche o inquinanti.
details
Service life:
max. 1 year
Flow rate:
0,5 gpm (1,9L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Customers Login
e-mail
password

www.sinergroup.it Everpure Filters