REAGENT 1 Hardness reagent precipitator 1. Reagent product for soft water demonstration. Volume: 150 ml Dosage / Use: Dose 10 drops of reagent 1 for each 25 ml of water. (Use it exclusively combined with reagent 2. After reagent 1 dose the same quantity of reagent 2). After homogenization the dissolution with soft water we will obtain a complete transparent dissolution. This effect will be reduced proportionally as the higher hardness contained in water. Precautions: Provoque Burns. Use gloves, protect

REAGENT 2 Hardness reagent precipitator 2. Reagent product for soft water demonstration. Volume: 150 ml Dosage / Use: Dose 10 drops of reagent 2 for each 25 ml of water. (Use it exclusively combined with reagent 1. After reagent 1 dose the same quantity of reagent 2). After homogenization the dissolution with soft water we will obtain a complete transparent dissolution. This effect will be reduced proportionally as the higher hardness contained in water. Precautions: Don’t ingest neither inhale it. Avoi

Soap solution reagent demo demonstration hardness softener Dosage / Use: Dose between 5 and 15 drops of Soap Solution for each 50 ml of water. Once shaken, using soft water, we will obtain a transparent solution with a lot of foam. This effect will be proportionally reduced as higher is the water hardness. Precautions: Provoque Burns. Use gloves, protection glasses or proper dress to manipulate it. Don’t ingest neither inhale it. Avoid eye and direct skin contact. In case of accident, seek immediate

Very useful to demonstrate that using a water softener led to a huge saving of soaps and detergents. With softened water, just pour few drops of this soap in a small container and shake a little bit to obtain abundant foam, while with the increase of the water hardness, you will need more and more drops to obtain the same result. It is a key product to show one of the many advantages of having a water softener into a house, restaurant or pub. Instructions 1. Wash a test tube or a small contain

Accessory required for precipitation hardness.

Accessory required for precipitation hardness. Dimensions (mm): 15x100

Accessory required for soap solution.

Composition: 1x Faucet connection kit. 2x Test tubes. 1x Test tubes holder. 2x Erlenmeyer of 150 ml. 1x Hardness analyser. 1x Disposable portable softener. 1x 150 cc bottle with precipitator 1. Demo drop crystal. 1x 150 cc bottle with precipitator 2. Demo drop green. 1x 150 cc bottle with soap. 1x Electronic TDS analyser. 1x Advanced electrolysis precipitator, WA.TEST (Optional). 1x 150 cc bottle with chlorine determination reagent.

IPT HARDNESS PRECIPITATION (to demonstrate the presence of hardness by the formation of a bulky precipitate) KIT CONTAINS: 1 bottle 25cc hardness precipitation A * 1 bottle 25cc hardness precipitation B * 2 test tube 20cc * use directions SPARE PARTS: hardness precipitation A, 6 bottles 25cc Code N° 3250 * hardness precipitation B, 6 bottles 25cc Code N° 3251 * hardness precipitation: 1 bottle da 250 cc A e 1 bottle da 250 cc B Code N° 3252 * hardness precipitation A, 2 bottles 250cc Code N° 3253 * hardne