This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

Runxin water F68 softeners residential valves regeneration meter time by-pass Up-flow hardness regulation

Water Softeners Autotrol 255.760 Clack WS1 CI Fleck 5600 SXT

order
other filters

Dayton water softener (Reg. Metered-Time) 7slim - 12slim - 12,5 - 18slim - 18 - 30 lt. resin
Dayton water softener (Reg. Metered-Time) 7slim - 12slim - 12,5 - 18slim - 18 - 30 lt. resin
15000106
Softening of next-generation valve volume and easy programming. Dayton delayed regeneration valve 859D to mixing valve to adjust the hardness out. Bypass installation included. Electronic controller integrated into the top cover. Pre-assembled and tested system for a easier installation and start-up. Battery incorporated for dinamic memory. Four different regeneration: Time initiated - Delayed regenerations according to selected frequence (Ex: Softener will regenerate every three days at 02:00AM). Meter imm
CS3H water softener (Reg. Metered-Time) 12,5 - 25 - 35 lt. resin
CS3H water softener (Reg. Metered-Time) 12,5 - 25 - 35 lt. resin
15000120
The CS water softeners range make of simplicity their point of strength. They have a volumetric valve and can be setted with four kind of regeneration: mixed time/volume regeneration, Time delayed, meter immediate, meter delayed. Time Delayed - Is a delayed regenerations according to selected frequence, Meter immediate - Regenerations are started after treating the programmed volume of water, Meter delayed regenerations - Regenerations are started after treating the programmed volume of water at the program
CS6H water softener (Reg. Metered-Time) 12,5 - 18 - 25 lt. resin
CS6H water softener (Reg. Metered-Time) 12,5 - 18 - 25 lt. resin
15000121
The CS water softeners range make of simplicity their point of strength. They have a volumetric valve and can be setted with four kind of regeneration: mixed time/volume regeneration, Time delayed, meter immediate, meter delayed. Time Delayed - Is a delayed regenerations according to selected frequence, Meter immediate - Regenerations are started after treating the programmed volume of water, Meter delayed regenerations - Regenerations are started after treating the programmed volume of water at the program
CS10H water softener (Reg. Metered-Time) 12,5 - 25 lt. resin
CS10H water softener (Reg. Metered-Time) 12,5 - 25 lt. resin
15000122
The CS water softeners range make of simplicity their point of strength. They have a volumetric valve and can be setted with four kind of regeneration: mixed time/volume regeneration, Time delayed, meter immediate, meter delayed. Time Delayed - Is a delayed regenerations according to selected frequence, Meter immediate - Regenerations are started after treating the programmed volume of water, Meter delayed regenerations - Regenerations are started after treating the programmed volume of water at the program
CS15H water softener (Reg. Metered-Time) 10 - 25 -30 lt. resin
CS15H water softener (Reg. Metered-Time) 10 - 25 -30 lt. resin
15000123
The CS water softeners range make of simplicity their point of strength. They have a volumetric valve and can be setted with four kind of regeneration: mixed time/volume regeneration, Time delayed, meter immediate, meter delayed. Time Delayed - Is a delaye
CS13 - UP Flow water softener (Reg. Metered-Time) 12,5 - 25 lt. resin
CS13 - UP Flow water softener (Reg. Metered-Time) 12,5 - 25 lt. resin
15000124
The CS water softeners range make of simplicity their point of strength. They have a volumetric valve and can be setted with four kind of regeneration: mixed time/volume regeneration, Time delayed, meter immediate, meter delayed. Time Delayed - Is a delayed regenerations according to selected frequence, Meter immediate - Regenerations are started after treating the programmed volume of water, Meter delayed regenerations - Regenerations are started after treating the programmed volume of water at the program
S134 water softener (Reg. Metered-Time) 12,5 - 28 lt. resin
S134 water softener (Reg. Metered-Time) 12,5 - 28 lt. resin
15000134
The S134 water softener is a device which combines the best performances to the minimum space.The metered-time valve equipped in the water softener, will allow you to select the regeneration mode most suited to your needs. Once all the desired paremeters will be setted, the water softener will works in complete autonomy and automatically, without the need of any manual operation. After the correct electric and hydraulic connections, the customer will only have to ensure that inside the device there is the s
Shower water softener (Reg. Manual) 4,5 lt. resin
Shower water softener (Reg. Manual) 4,5 lt. resin
15000125
One step regeneration shower softener. No electricity required. Easy installation. One step only to complete regeneration process. Slide cover for water proof. Maximum water temperature working: 60°C.
Ergo water softener (Reg. Metered-Time) 8 - 11 - 17 lt. resin
Ergo water softener (Reg. Metered-Time) 8 - 11 - 17 lt. resin
15000118
ERGO Volumetric Water Softeners. Work without power supply. Designed according to the needs of installation technicians and professionals of the water treatment branch, the ERGO equipment has the most advanced technology to facilitate installation and maximise reliability. The ERGO valve, made of Noryl, has a totally hydraulic system and works without electricity. The DIRECT ACCESS system makes programming easier and guarantees a correct commissioning. ERGO includes th
BNT1650F Valve automatic water softener 1" electronic (Reg. Metered-Time) 8-10-12-15-20-25-30 lt. resin
BNT1650F Valve automatic water softener 1" electronic (Reg. Metered-Time) 8-10-12-15-20-25-30 lt. resin
15000126
Automatic water softening device. BNT1650F valve with Volume/time regeneration. The valve is fully programmable and its programming is quick and easy. Complete with 230V - 50Hz power supply socket. Output hardness regulator integrated into the valve body, by turning the adjustment knob you will mix the raw water with the appliance softened water. An outlet hardness of about 15°F is recommended, however, the most frequently used setting is not less than 5°F. To mix a specific output hardness value, turn the
BNT650T Valve automatic water softener 1" electronic (Reg. Time) 8-10-12-15-20-25-30 lt. resin
BNT650T Valve automatic water softener 1" electronic (Reg. Time) 8-10-12-15-20-25-30 lt. resin
15000127
Automatic water softener. The BNT650 is a user friendly valve with mechanic regulation. Thanks to its fixed-clicks timer, you will be able to set the regeneration intervals based on the desired timing. Indicated for commercial and residential usages, the valve can be used both for softening or filtration, with pressure vessels with diameter up to 16"; the valve's body is made of Noryl plastic material. Complete with ballast 110/240V - 50/60Hz. The hardness regulation of the outlet water can be adjusted w
Automatic water softener valve AUTOTROL 255/740 Logix 1" electronic (Reg. Time) 8-10-12-15-20-25-30 lt. resin
Automatic water softener valve AUTOTROL 255/740 Logix 1" electronic (Reg. Time) 8-10-12-15-20-25-30 lt. resin
15000130
Automatic water softener. Electronic AUTOTROL valve 255/740 Logix 1" (Reg. Time). Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at night. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Clutching the set screw is going to open the clapper by-pass, which allow you to mix raw water with water treated by device. At the first turn of the screw, the water hardness
Automatic water softener valve Clack WS1CI 1" electronic (Reg. Metered-time) 8-10-12-15-20-25-30 lt. resin
Automatic water softener valve Clack WS1CI 1" electronic (Reg. Metered-time) 8-10-12-15-20-25-30 lt. resin
15000108
Automatic water softener Electronic WS1CI Clack valve 1 " (Reg. Metered-time).Low consumption of water and salt per regeneration. Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at night, number of days between regenerations and hardness input. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Is required output minimum hardness of around 15°F, but the most commonl
Automatic water softener valve Clack WS1TC 1" electronic (Reg. Time) 8-10-12-15-20-25-30 lt. resin
Automatic water softener valve Clack WS1TC 1" electronic (Reg. Time) 8-10-12-15-20-25-30 lt. resin
15000117
Automatic water softener Electronic WS1TC Clack valve 1 " (Reg. Time).Low consumption of water and salt per regeneration. Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at night, number of days between regenerations and hardness input. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Is required output minimum hardness of around 15°F, but the most commonly used
Automatic water softener valve Clack WS1CI 1" electronic (Reg. Metered-time) 8-10-12-15-20-25-30 lt. resin
Automatic water softener valve Clack WS1CI 1" electronic (Reg. Metered-time) 8-10-12-15-20-25-30 lt. resin
15000136
Automatic water softener Electronic WS1CI Clack valve 1 " (Reg. Metered-time).Low consumption of water and salt per regeneration. Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at night, number of days between regenerations and hardness input. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Is required output minimum hardness of around 15°F, but the most commonl
Automatic water softener valve Clack WS1CI 1" electronic (Reg. Metered-time) 8-10-12-15-20-25-30 lt. resin
Automatic water softener valve Clack WS1CI 1" electronic (Reg. Metered-time) 8-10-12-15-20-25-30 lt. resin
15000113
Automatic water softener Electronic WS1CI Clack valve 1 " (Reg. Metered-time).Low consumption of water and salt per regeneration. Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at night, number of days between regenerations and hardness input. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Is required output minimum hardness of around 15°F, but the most commonl
Automatic water softener valve AUTOTROL 255/760 Logix 1" electronic (Reg. Metered-Time) 8-10-12-15-20-25-30 lt. resin
Automatic water softener valve AUTOTROL 255/760 Logix 1" electronic (Reg. Metered-Time) 8-10-12-15-20-25-30 lt. resin
15000105
Automatic water softener. Electronic AUTOTROL valve 255/760 Logix 1" (Reg. Metered-time). Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at night, number of days between regenerations and hardness input. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Clutching the set screw is going to open the clapper by-pass, which allow you to mix raw water with water treat
Automatic water softener valve AUTOTROL 255/760 Logix 1" electronic (Reg. Metered-Time) 8-10-12-15-20-25-30 lt. resin
Automatic water softener valve AUTOTROL 255/760 Logix 1" electronic (Reg. Metered-Time) 8-10-12-15-20-25-30 lt. resin
15000135
Automatic water softener. Electronic AUTOTROL valve 255/760 Logix 1" (Reg. Metered-time). Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at night, number of days between regenerations and hardness input. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Clutching the set screw is going to open the clapper by-pass, which allow you to mix raw water with water treat
Automatic water softener valve Fleck 5600 SXT 1" electronic (Reg. Metered-time) 8-10-12-15-20-25-30 lt. resin
Automatic water softener valve Fleck 5600 SXT 1" electronic (Reg. Metered-time) 8-10-12-15-20-25-30 lt. resin
15000107
FLECK 5600 SXT Electronic valve Automatic meter/time regeneration. Program with high performance which allows a low water and salt per regeneration consumption. Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter time, day of week, time of regeneration, typically 02.00 at night, number of days between regenerations and hardness input. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Is raccomended a minimum hardness in output o
Evolio automatic water softener valve Fleck 5800 SXT 3/4" electronic (Reg. Metered-time) 8-15-20-30 lt. resin
Evolio automatic water softener valve Fleck 5800 SXT 3/4" electronic (Reg. Metered-time) 8-15-20-30 lt. resin
15000116
Evolio has been developed as an easy-to-use complete softener with a modern and attractive design. Each version is available in 4 different sizes. The timer is mounted on the top cover, facilitating the access to the softener data, easily readable thanks to the 20° display inclination. Moreover, the large salt opening makes Evolio softener ergonomic and simplifies the salt refill operation. Integrated bypass Benefits and advantages Reduction of water hardness, which is cause of scale. ENERGY SAVING:
Automatic water softener valve AUTOTROL Peanut 368/606 3/4" electronic (Reg. Metered-time) 14lt. resin
Automatic water softener valve AUTOTROL Peanut 368/606 3/4" electronic (Reg. Metered-time) 14lt. resin
15000112
This is a water softener elegant design that gives you the feeling of luxury water. Reduces the unpleasant limestone around the tub and the sink. It will save you money on your heating bill and reduce the consumption of all detergents and cleaning products. The water pipes will always be clean and free from fouling, clogging and damage. In all the water circuit there will be more pressure losses or water flows minors. Efficient and carbon neutral The Peanut 368 water softener has been shown to save up
Automatic water softener valve BNT650T 1" (Reg. Time)
Automatic water softener valve BNT650T 1" (Reg. Time)
15000131
BNT650T valve 1" with mechanic regulation, regeneration time. Low consumption of water and salt per regeneration. Extremely easy programming thanks to its fixed-clicks timer on which you can set regeneration intervals based on the desired time. Hardness regulator output Is required output minimum hardness of around 15°F, but the most commonly used setting is not less than 5°F. Loosening action will reduce mixing with raw water output. To mix a specific output hardness value, adjust screw and test w
Automatic water softener valve BNT1650F 1" (Reg. Metered-time)
Automatic water softener valve BNT1650F 1" (Reg. Metered-time)
15000132
Automatic water softener electronic BNT1650F valve 1", regeneration metered-time. Low consumption of water and salt per regeneration. Programming is simple and fast - Insertion the time. - Insertion day of week. - Time of regeneration. - Number of days between regenerations. - Hardness input. Hardness regulator output Is required output minimum hardness of around 15°F, but the most commonly used setting is not less than 5°F. Loosening action will reduce mixing with raw water outp
Single tank water softener valve Clack WS1CI 1" electronic (Reg. Metered-time) from 8 to 200 lt. resin
Single tank water softener valve Clack WS1CI 1" electronic (Reg. Metered-time) from 8 to 200 lt. resin
15000203
Automatic water softener. Electronic WS1CI Clack valve 1 " (Reg. Metered-time).Low consumption of water and salt per regeneration Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at night, number of days between regenerations and hardness input. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Is required output minimum hardness of around 15°F, but the most common
details
Dimensions ØxH (mm.) - 8lit.:
203x619
Pressure vessel - 8lit.:
8"x17"
Brine tank ØxH (mm.) - 8lit.:
285x440 - capacity salt 25lit.
Dimensions ØxH (mm.) - 12lit.:
178x949
Pressure vessel - 12lit.:
7"x30"
Brine tank ØxH (mm.) - 12lit.:
285x440 - capacity salt 25lit.
Dimensions ØxH (mm.) - 15lit.:
178x1.076
Pressure vessel - 15lit.:
7"x35"
Brine tank ØxH (mm.) - 15lit.:
400x815 - capacity salt 70lit.
Dimensioni ØxA (mm.) - 20lit.:
203x1.076
Pressure vessel - 20lit.:
8"x35"
Brine tank ØxH (mm.) - 20lit.:
400x815 - capacity salt 70lit.
Dimensions ØxH (mm.) - 25lit.:
228x1.076
Pressure vessel - 25lit.:
9"x35"
Brine tank ØxH (mm.) - 25lit.:
400x815 - capacity salt 70lit.
Dimensions ØxH (mm.) - 30lit.:
254x1.076
Pressure vessel - 30lit.:
10"x35"
Brine tank ØxH (mm.) - 30lit.:
400x815 - capacity salt 70lit.
Dimensions ØxH (mm.) - 40lit.:
254x1.305
Pressure vessel - 40lit.:
10"x44"
Brine tank ØxH (mm.) - 40lit.:
460x875 - capacity salt 100lit.
Dimensions ØxH (mm.) - 50lit.:
254x1.559
Pressure vessel - 50lit.:
10"x54"
Brine tank ØxH (mm.) - 50lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 60lit.:
305x1.407
Pressure vessel - 60lit.:
12"x48"
Brine tank ØxH (mm.) - 60lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 70lit.:
330x1.559
Pressure vessel - 70lit.:
13"x54"
Brine tank ØxH (mm.) - 70lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 75lit.:
330x1.559
Pressure vessel - 75lit.:
13"x54"
Pressure vessel - 75lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 80lit.:
330x1.559
Pressure vessel - 80lit.:
13"x54"
Brine tank ØxH (mm.) - 80lit.:
585x1.040 - capacity salt 200lit.
Dimensions ØxH (mm.) - 100lit.:
356x1.838
Pressure vessel - 100lit.:
14"x65"
Brine tank ØxH (mm.) - 100lit.:
530x1.050 - capacity salt 200lit.
Dimensions ØxH (mm.) - 125lit.:
356x1.838
Pressure vessel - 125lit.:
14"x65"
Brine tank ØxH (mm.) - 125lit.:
530x1.050 - capacity salt 200lit.
Dimensions ØxH (mm.) - 150lit.:
458x1.838
Pressure vessel - 150lit.:
18"x65"
Dimensions ØxH (mm.) - 200lit.:
533x1.762
Pressure vessel - 200lit.:
18"x65"
Brine tank ØxH (mm.) - 350lit.:
740x1.275 - capacity salt 406lit.
 
Single tank water softener valve Clack WS1TC 1" electronic (Reg. Time) from 8 to 200 lt. resin
Single tank water softener valve Clack WS1TC 1" electronic (Reg. Time) from 8 to 200 lt. resin
15000204
Automatic water softener. Electronic WS1TC Clack valve 1 " (Reg.Time).Low consumption of water and salt per regeneration Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at night, number of days between regenerations and hardness input. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Is required output minimum hardness of around 15°F, but the most commonly used
details
Dimensions ØxH (mm.) - 8lit.:
203x619
Pressure vessel - 8lit.:
8"x17"
Brine tank ØxH (mm.) - 8lit.:
285x440 - capacity salt 25lit.
Dimensions ØxH (mm.) - 12lit.:
178x949
Pressure vessel - 12lit.:
7"x30"
Brine tank ØxH (mm.) - 12lit.:
285x440 - capacity salt 25lit.
Dimensions ØxH (mm.) - 15lit.:
178x1.076
Pressure vessel - 15lit.:
7"x35"
Brine tank ØxH (mm.) - 15lit.:
400x815 - capacity salt 70lit.
Dimensioni ØxA (mm.) - 20lit.:
203x1.076
Pressure vessel - 20lit.:
8"x35"
Brine tank ØxH (mm.) - 20lit.:
400x815 - capacity salt 70lit.
Dimensions ØxH (mm.) - 25lit.:
228x1.076
Pressure vessel - 25lit.:
9"x35"
Brine tank ØxH (mm.) - 25lit.:
400x815 - capacity salt 70lit.
Dimensions ØxH (mm.) - 30lit.:
254x1.076
Pressure vessel - 30lit.:
10"x35"
Brine tank ØxH (mm.) - 30lit.:
400x815 - capacity salt 70lit.
Dimensions ØxH (mm.) - 40lit.:
254x1.305
Pressure vessel - 40lit.:
10"x44"
Brine tank ØxH (mm.) - 40lit.:
460x875 - capacity salt 100lit.
Dimensions ØxH (mm.) - 50lit.:
254x1.559
Pressure vessel - 50lit.:
10"x54"
Brine tank ØxH (mm.) - 50lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 60lit.:
305x1.407
Pressure vessel - 60lit.:
12"x48"
Brine tank ØxH (mm.) - 60lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 70lit.:
330x1.559
Pressure vessel - 70lit.:
13"x54"
Brine tank ØxH (mm.) - 70lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 75lit.:
330x1.559
Pressure vessel - 75lit.:
13"x54"
Pressure vessel - 75lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 80lit.:
330x1.559
Pressure vessel - 80lit.:
13"x54"
Brine tank ØxH (mm.) - 80lit.:
585x1.040 - capacity salt 200lit.
Dimensions ØxH (mm.) - 100lit.:
356x1.838
Pressure vessel - 100lit.:
14"x65"
Brine tank ØxH (mm.) - 100lit.:
530x1.050 - capacity salt 200lit.
Dimensions ØxH (mm.) - 125lit.:
356x1.838
Pressure vessel - 125lit.:
14"x65"
Brine tank ØxH (mm.) - 125lit.:
530x1.050 - capacity salt 200lit.
Dimensions ØxH (mm.) - 150lit.:
458x1.838
Pressure vessel - 150lit.:
18"x65"
Brine tank ØxH (mm.) - 150lit.:
735x1.180 - capacity salt 300lit.
Dimensions ØxH (mm.) - 200lit.:
533x1.762
Pressure vessel - 200lit.:
18"x65"
Brine tank ØxH (mm.) - 200lit.:
735x1.180 - capacity salt 300lit.
 
Single tank water softener valve AUTOTROL 255/760 Logix 1" electronic (Reg. Metered-time) from 8 to 80 lt. resin
Single tank water softener valve AUTOTROL 255/760 Logix 1" electronic (Reg. Metered-time) from 8 to 80 lt. resin
15000201
Automatic water softener. Electronic AUTOTROL valve 255/760 Logix 1" (Reg. Metered-time). Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at nigh
details
Dimensions ØxH (mm.) - 8lit.:
203x632
Pressure vessel - 8lit.:
8"x17"
Brine tank ØxH (mm.) - 8lit.:
340x470 - capacity salt 30lit.
Dimensions ØxH (mm.) - 12lit.:
178x959
Pressure vessel - 12lit.:
7"x30"
Brine tank ØxH (mm.) - 12lit.:
340x470 - capacity salt 30lit.
Dimensions ØxH (mm.) - 15lit.:
196X1.087
Pressure vessel - 15lit.:
7"x35"
Brine tank ØxH (mm.) - 15lit.:
340x905 - capacity salt 75lit.
Dimensioni ØxA (mm.) - 20lit.:
203x1.087
Pressure vessel - 20lit.:
8"x35"
Brine tank ØxH (mm.) - 20lit.:
340x905 - capacity salt 75lit.
Dimensions ØxH (mm.) - 25lit.:
228x1.091
Pressure vessel - 25lit.:
9"x35"
Brine tank ØxH (mm.) - 25lit.:
340x905 - capacity salt 75lit.
Dimensions ØxH (mm.) - 30lit.:
254x1.087
Pressure vessel - 30lit.:
10"x35"
Brine tank ØxH (mm.) - 30lit.:
340x905 - capacity salt 75lit.
Dimensions ØxH (mm.) - 35lit.:
254x1.318
Pressure vessel - 35lit.:
10"x44"
Brine tank ØxH (mm.) - 35lit.:
340x1.160 - capacity salt 100lit.
Dimensions ØxH (mm.) - 40lit.:
254x1.318
Pressure vessel - 40lit.:
10"x44"
Brine tank ØxH (mm.) - 40lit.:
340x1.160 - capacity salt 100lit.
Dimensions ØxH (mm.) - 50lit.:
254x1.575
Pressure vessel - 50lit.:
10"x54"
Brine tank ØxH (mm.) - 50lit.:
530x800 - capacity salt 150lit.
Dimensions ØxH (mm.) - 60lit.:
254x1.722
Pressure vessel - 60lit.:
12"x48"
Brine tank ØxH (mm.) - 60lit.:
530x800 - capacity salt 150lit.
Dimensions ØxH (mm.) - 70lit.:
330x1.580
Pressure vessel - 70lit.:
13"x54"
Brine tank ØxH (mm.) - 70lit.:
530x800 - capacity salt 150lit.
Dimensions ØxH (mm.) - 75lit.:
330x1.580
Pressure vessel - 75lit.:
13"x54"
Pressure vessel - 75lit.:
530x800 - capacity salt 150lit.
Dimensions ØxH (mm.) - 80lit.:
330x1.575
Pressure vessel - 80lit.:
13"x54"
Brine tank ØxH (mm.) - 80lit.:
530x1.050 - capacity salt 200lit.
 
Single tank water softener valve AUTOTROL 255/760 Logix 1" electronic (Reg. Metered-time) Greentank pressure vessel, BTS tank
Single tank water softener valve AUTOTROL 255/760 Logix 1" electronic (Reg. Metered-time) Greentank pressure vessel, BTS tank
15000208
Automatic water softener. Electronic AUTOTROL valve 255/760 Logix 1" (Reg. Metered-time). Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at night, number of days between regenerations and hardness input. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Clutching the set screw is going to open the clapper by-pass, which allow you to mix raw water with water trea
details
Dimensioni ØxA (mm.) - 20lit.:
203x1.101
Pressure vessel - 20lit.:
8"x35"
Brine tank HxLxP (mm.) - 20lit.:
880x340x340 - capacity salt 100lit.
 
Single tank water softener valve FLECK 5600 SXT 1" electronic (Reg. Metered-time) from 8 to 80 lt. resin
Single tank water softener valve FLECK 5600 SXT 1" electronic (Reg. Metered-time) from 8 to 80 lt. resin
15000202
FLECK 5600 SXT Electronic valve Automatic meter/time regeneration . Program with high performance which allows a low water and salt per regeneration consumption. Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter time, day of week, time of regeneration, typically 02.00 at night, number of days between regenerations and hardness input. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Is raccomended a minimum hardness in outpu
details
Dimensions ØxH (mm.) - 8lit.:
203x627
Pressure vessel - 8lit.:
8"x17"
Brine tank ØxH (mm.) - 8lit.:
285x440 - capacity salt 25lit.
Dimensions ØxH (mm.) - 12lit.:
178x957
Pressure vessel - 12lit.:
7"x30"
Brine tank ØxH (mm.) - 12lit.:
285x440 - capacity salt 25lit.
Dimensions ØxH (mm.) - 15lit.:
178x1.084
Pressure vessel - 15lit.:
7"x35"
Brine tank ØxH (mm.) - 15lit.:
400x815 - capacity salt 70lit.
Dimensioni ØxA (mm.) - 20lit.:
203x1.084
Pressure vessel - 20lit.:
8"x35"
Brine tank ØxH (mm.) - 20lit.:
400x815 - capacity salt 70lit.
Dimensions ØxH (mm.) - 25lit.:
228x1.084
Pressure vessel - 25lit.:
9"x35"
Brine tank ØxH (mm.) - 25lit.:
400x815 - capacity salt 70lit.
Dimensions ØxH (mm.) - 30lit.:
254x1.084
Pressure vessel - 30lit.:
10"x35"
Brine tank ØxH (mm.) - 30lit.:
400x815 - capacity salt 70lit.
Dimensions ØxH (mm.) - 40lit.:
254x1.313
Pressure vessel - 40lit.:
10"x44"
Brine tank ØxH (mm.) - 40lit.:
460x875 - capacity salt 100lit.
Dimensions ØxH (mm.) - 50lit.:
254x1.567
Pressure vessel - 50lit.:
10"x54"
Brine tank ØxH (mm.) - 50lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 60lit.:
305x1.415
Pressure vessel - 60lit.:
12"x48"
Brine tank ØxH (mm.) - 60lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 70lit.:
330x1.567
Pressure vessel - 70lit.:
13"x54"
Brine tank ØxH (mm.) - 70lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 75lit.:
330x1.567
Pressure vessel - 75lit.:
13"x54"
Pressure vessel - 75lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 80lit.:
330x1.567
Pressure vessel - 80lit.:
13"x54"
Brine tank ØxH (mm.) - 80lit.:
585x1.040 - capacity salt 200lit.
 
BNT1650F Single tank water softener valve 1" electronic (Reg. Metered-time) from 8 to 80 lt. resin
BNT1650F Single tank water softener valve 1" electronic (Reg. Metered-time) from 8 to 80 lt. resin
15000205
Automatic water softening device. BNT1650F valve with Volume/time regeneration. The valve is fully programmable and its programming is quick and easy. Complete with 230V - 50Hz power supply socket. Output hardness regulator integrated into the valve body, by turning the adjustment knob you will mix the raw water with the appliance softened water. An outlet hardness of about 15°F is recommended, however, the most frequently used setting is not less than 5°F. To mix a specific output hardness value, turn th
details
Dimensions ØxH (mm.) - 8lit.:
203x619
Pressure vessel - 8lit.:
8"x17"
Brine tank ØxH (mm.) - 8lit.:
285x440 - capacity salt 25lit.
Dimensions ØxH (mm.) - 12lit.:
178x949
Pressure vessel - 12lit.:
7"x30"
Brine tank ØxH (mm.) - 12lit.:
285x440 - capacity salt 25lit.
Dimensions ØxH (mm.) - 15lit.:
178x1.076
Pressure vessel - 15lit.:
7"x35"
Brine tank ØxH (mm.) - 15lit.:
400x815 - capacity salt 70lit.
Dimensioni ØxA (mm.) - 20lit.:
203x1.076
Pressure vessel - 20lit.:
8"x35"
Brine tank ØxH (mm.) - 20lit.:
400x815 - capacity salt 70lit.
Dimensions ØxH (mm.) - 25lit.:
228x1.076
Pressure vessel - 25lit.:
9"x35"
Brine tank ØxH (mm.) - 25lit.:
400x815 - capacity salt 70lit.
Dimensions ØxH (mm.) - 30lit.:
254x1.076
Pressure vessel - 30lit.:
10"x35"
Brine tank ØxH (mm.) - 30lit.:
400x815 - capacity salt 70lit.
Dimensions ØxH (mm.) - 40lit.:
254x1.305
Pressure vessel - 40lit.:
10"x44"
Brine tank ØxH (mm.) - 40lit.:
460x875 - capacity salt 100lit.
Dimensions ØxH (mm.) - 50lit.:
254x1.559
Pressure vessel - 50lit.:
10"x54"
Brine tank ØxH (mm.) - 50lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 60lit.:
254x1.407
Pressure vessel - 60lit.:
12"x48"
Brine tank ØxH (mm.) - 60lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 70lit.:
330x1.559
Pressure vessel - 70lit.:
13"x54"
Brine tank ØxH (mm.) - 70lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 75lit.:
330x1.559
Pressure vessel - 75lit.:
13"x54"
Pressure vessel - 75lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 80lit.:
330x1.559
Pressure vessel - 80lit.:
13"x54"
Brine tank ØxH (mm.) - 80lit.:
585x1.040 - capacity salt 200lit.
 
137 products found - 5 pages
|< <<
1
2345
>> >|
Customers Login
e-mail
password

Air cooled engine reverse osmosis water coolers rotary pump capacitor

www.sinergroup.it Everpure Filters