This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

Soda breezy 2 Gasatore acqua Soda maker Sparkling water acqua frizzante

telephone
(+39)0773.52.30.14
fax
(+39)06.233.234.260
e-mail
info@sinergroup.it

S134 water softener (Reg. Metered-Time) 12,5 - 28 lt. resin

S134 water softener (Reg. Metered-Time) 12,5 - 28 lt. resin
printask a
question
Ask a question
x
First name

e-mail (*)

Subject

Text (*)

(*) required fields
sendclose
Variants
Code
Description
 
15000134-001
S134 water softener (Reg. Metered-Time) 12,5 lt. resin
 
Informations

Code:
15000134

Weight:
15 Kg

Description
S134 water softener (Reg. Metered-Time) 12,5 - 28 lt. resin
click to enlargeclick to enlargeclick to enlargeclick to enlargeclick to enlargeclick to enlargeclick to enlarge
click on images to enlarge
Full description
The S134 water softener is a device which combines the best performances to the minimum space.The metered-time valve equipped in the water softener, will allow you to select the regeneration mode most suited to your needs. Once all the desired paremeters will be setted, the water softener will works in complete autonomy and automatically, without the need of any manual operation. After the correct electric and hydraulic connections, the customer will only have to ensure that inside the device there is the sufficient amount of salt. The water softener will be supplied with its own bypass.

Features
- Pressure min.: 1,5 bar (1,5 kg/cm2)
- Pressure max.: 6 bar (6 kg/cm2)
- Temperature min: 5°C
- Temperature max: 38°C

Water hardness (limestone)
In °F (French degrees), can be measured with the drops of Titrant, important to determine the choice of the type of water softener and optimize the consumption of salt.

Calculate sample to determine the correct article
A water softner of 25lt. resin with a hardness of 40°F (medium-high hardness), develops 3.500lt. of softened water (140:40=3.500). In this case, must planning 3.5m3 in treatment capacity of the softener through the buttons on the display and provides free water softener without scale at zero French degrees.

Adjustment of outlet hardness
It's recommended to not leak totally softened water in a residential installation. The water softeners has a residual hardness regulator that allows you to precisely adjust the hardness of the treated water. Water intended for human consumption, we recommend a residual hardness between 5 and 10ºF for copper pipes and between 8 and 10ºF for iron pipes. Depending on the hardness out planned, the water softener will tend to produce more water and less sweetened salt intake because the input hardness must be compensated with the output value. The average every person consumes 150lt. of water a day is recommended and a regeneration time scheduled every 4/5 days, then a family of 4 with water at 40°F consumes for 5 days 3.000lt., a 25lt. of water softner so with a planned regeneration even at 6 days can be installed.

Benefits and advantages
Reduction of water hardness, which is cause of scale.
ENERGY SAVING: the device prevents the formation of deposits in pipes and hydraulic lines. Greater sense of wellness during the shower. Skin soft and clean. Increased duration of appliances and boilers.
COST SAVING: reduction in the use of soaps, fabric softeners and chemicals. Reduced maintenance costs. Fully automatic operation. It should just worry about adding salt in the water softner.

Increased sodium (for drinking water)
Most of the sodium consumed is taken with food, especially those produced by industrial processing. Salt is an excellent preservative and is used as an additive for processed products. The intake of sodium with the water we drink is relatively low compared to that which is taken with food. All softeners to produce soft water using ion exchange resins in the produce softened water output of sodium ions. The recommended sodium limit for water intended for human consumption is 200 ppm/lt.. Depending on the concentration of sodium and water hardness, the water can have a concentration of sodium than the recommended. Where this occurs, or if you need to follow a diet low in salt, it is advisable to install a reverse osmosis drinking water for the home.

Specifications:
- Water softener ideal for 2/3 people
- Regeneration salt consumption: 2 kg/salt.
- Water consumption for regeneration: 50 lt.
- Working flow: 0,8-1.800 m3/h
- Inlet/Outlet water: 3/4"
- Dimensions mm. (WxDxH): 525x325x615
Related products
Customers Login
e-mail
password

DMfit quick fit fittings stop faucet adaptor valves acetalic resin metric inch size food&drink beverage compressed air flow systems

www.sinergroup.it Everpure Filters