Languages
Products
04001001
Wound polypropylene cartridge.
details
Internal diameter:
28 mm.
External diameter:
62 mm.
Core:
Rigid polypropylene
Efficiency:
80%
Pressure:
6bar (87psi) max.
Max differential pressure:
0,8 bar (80 kpa.)
Temperature Rating:
176°F (80°C) max.
Flow rate 1 micron:
0,66 gpm (2,5L/min)
Flow rate 5 micron:
1,7 gpm (6,6L/min)
Flow rate 20 micron:
3,7 gpm (14,1L/min)
Flow rate 50 micron:
4,1 gpm (15,8L/min)
04001006
Filters manufactured with 100% pure polypropylene wire. They reduce sediments, rust and others suspended impurities. The filter is wound around an internal rigid polypropylene core with a precise model, this guarantees an higher filtering surface. The result is an high sediments hold back capacity and an higher efficency then normal wound polypropylene filters. They will not release taste, odor or color to the liquid being filtered when used within the recommended temperature limit. Additionally, the polypr
details
Service life:
When completely dirt - 3, Max. 6 months
Flow rate 1 micron:
1,3 gpm (5L/min)
Flow rate 5 micron:
3,5 gpm (13,3L/min)
Flow rate 10 micron:
4,8 gpm (18,3L/min)
Flow rate 20 micron:
7,4 gpm (28,3L/min)
Flow rate 50 micron:
8,3 gpm (31,6L/min)
Flow rate 100 micron:
8,7 gpm (33,3L/min)
Pressure:
87psi (6bar) max.
Max differential pressure:
80 kpa (0,8 bar)
Temperature Rating:
39,2 - 176°F (4 - 80°C)
Efficiency:
80%
Dimensions H.xO.D.:
9-3/4" x 2-1/2" (Inch) / 248 x 63 (mm.)
I.D. Core:
1,102" (Inch) / 28 (mm.)
Core:
Rigid polypropylene
04001002
Wound polypropylene cartridge.
details
Internal diameter:
28 mm.
External diameter:
60 mm.
Core:
Rigid polypropylene
Efficiency:
80%
Pressure:
87psi (6bar) max.
Max differential pressure:
0,8 bar (80 kpa.)
Temperature Rating:
176°F (80°C) max.
Flow rate 1 micron:
1,3 gpm (5L/min)
Flow rate 5 micron:
3,5 gpm (13,3L/min)
Flow rate 10 micron:
4,8 gpm (18,3L/min)
Flow rate 20 micron:
7,4 gpm (28,3L/min)
Flow rate 50 micron:
8,3 gpm (31,6L/min)
Flow rate 100 micron:
8,7 gpm (33,3L/min)
04001007
Filters manufactured with 100% pure polypropylene wire. They reduce sediments, rust and others suspended impurities. The filter is wound around an internal rigid polypropylene core with a precise model, this guarantees an higher filtering surface. The result is an high sediments hold back capacity and an higher efficency then normal wound polypropylene filters. They will not release taste, odor or color to the liquid being filtered when used within the recommended temperature limit. Additionally, the polypr
details
Service life:
When completely dirt - 3, Max. 6 months
Flow rate 1 micron:
2,6 gpm (10L/min)
Flow rate 5 micron:
7 gpm (26,6L/min)
Flow rate 10 micron:
8,7 gpm (33,3L/min)
Flow rate 20 micron:
10,9 gpm (41,6L/min)
Flow rate 50 micron:
15,4 gpm (58,3L/min)
Flow rate 100 micron:
15,8 gpm (60L/min)
Pressure:
87psi (6bar) max.
Max differential pressure:
80 kpa (0,8 bar)
Temperature Rating:
39,2 - 176°F (4 - 80°C)
Efficiency:
80%
Dimensions H.xO.D.:
20" x 2-1/2" (Inch) / 508 x 63,5 (mm.)
I.D. Core:
1,102" (Inch) / 28 (mm.)
Core:
Rigid polypropylene
04001004
Wound polypropylene cartridge.
details
Internal diameter:
28 mm.
External diameter:
60 mm.
Core:
Polypropylene
Efficiency:
80%
Pressure:
6bar (87psi) max.
Max differential pressure:
0,8 bar (80 kpa.)
Temperature Rating:
176°F (80°C) max.
Flow rate 1 micron:
2,6 gpm (10L/min)
Flow rate 5 micron:
7 gpm (26,6L/min)
Flow rate 10 micron:
8,7 gpm (33,3L/min)
Flow rate 20 micron:
10,9 gpm (41,6L/min)
Flow rate 50 micron:
15,4 gpm (58,3L/min)
Flow rate 100 micron:
15,8 gpm (60L/min)
04001005
The manufacturing procedure is founded on the wrapping of an appropriate polypropylene yarn on a inner bored support (core OD28mm), that produces a particular honeycomb texture that consents to obtain on the filtration mass section some spiral micropass an
