This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

Water Cooler Carbonators for sparkling water

04003003_01.jpgHome
 » 
Housings Drop In filters
 » 
Big Melt blown polypropylene cartridges
order
other filters

Ionicore Big Melt blown polypropylene cartridges 10" - 1, 5, 10, 20, 50, 100 micron (20)
Ionicore Big Melt blown polypropylene cartridges 10" - 1, 5, 10, 20, 50, 100 micron (20)
04003003
Filters manufactured with 100% pure polypropylene fibers. They reduce sediments, rust and others suspended impurities. The fibers have been carefully spun together to form a true gradient density from outer to inner surface. The result is an high sediments hold back capacity and an higher efficency then normal melt blown polypropylene filters. They will not release taste, odor or color to the liquid being filtered when used within the recommended temperature limit. Additionally, the polypropylene constructi
details
Service life:
When completely dirt - 3, Max. 6 months
Pressure:
87psi (6bar) max.
Max differential pressure:
80 kpa (0,8 bar)
Temperature Rating:
39,2 - 176°F (4 - 80°C)
Efficiency:
95%
Dimensions H.xO.D.:
10" x 4-1/2" (Inch) / 254 x 114 (mm.)
I.D. Core:
1,102" (Inch) / 28 (mm.)
 
Green Filter Big Melt blown polypropylene cartridge 9-7/8" - 5, 50 micron (10)
Green Filter Big Melt blown polypropylene cartridge 9-7/8" - 5, 50 micron (10)
04003001
Sand, salt sediment and other suspended impurities removal. 100% pure polypropylene, heat-blown hot-melt fiber. Great capacity for contaminant retention. Longer durability. Low pressure drop. Multilayer structure (the fibers are thinner inside than outside the filter). The internal structure of the cartridge widens from the inside out, which increases the cartridge contaminant retention capacity and improves its useful life. According to the FDA regulations. Chemical resistance: 100% polypropylene.
details
Pressure:
6bar (87psi) max.
Service life:
When completely dirt - 3, Max. 6 months
Flow rate 5 micron:
7 gpm (26,6L/min)
Flow rate 50 micron:
11,3 gpm (43,3L/min)
Max differential pressure:
0,8 bar (80 kpa.)
Temperature Rating:
39.2 - 176°F (4 - 80°C)
Efficiency:
95%
Dimensions H.xO.D.:
9-7/8" x 4-1/2" (Inch) / 251 x 114 (mm.)
I.D. Core:
1,102" (Inch) / 28 (mm.)
Core:
Without - Grooves Finishing
 
Ionicore Big Melt blown polypropylene cartridges 20" - 1, 5, 10, 20, 50, 100 micron (10)
Ionicore Big Melt blown polypropylene cartridges 20" - 1, 5, 10, 20, 50, 100 micron (10)
04003004
Filters manufactured with 100% pure polypropylene fibers. They reduce sediments, rust and others suspended impurities. The fibers have been carefully spun together to form a true gradient density from outer to inner surface. The result is an high sediments hold back capacity and an higher efficency then normal melt blown polypropylene filters. They will not release taste, odor or color to the liquid being filtered when used within the recommended temperature limit. Additionally, the polypropylene constructi
details
Service life:
When completely dirt - 3, Max. 6 months
Pressure:
87psi (6bar) max.
Max differential pressure:
80 kpa (0,8 bar)
Temperature Rating:
39,2 - 176°F (4 - 80°C)
Efficiency:
95%
Dimensions H.xO.D.:
20" x 4-1/2" (Inch) / 508 x 114 (mm.)
I.D. Core:
1,102" (Inch) / 28 (mm.)
 
Green Filter Big Melt blown polypropylene cartridge 20" - 5, 50 micron (10)
Green Filter Big Melt blown polypropylene cartridge 20" - 5, 50 micron (10)
04003002
Sand, salt sediment and other suspended impurities removal. 100% pure polypropylene, heat-blown hot-melt fiber. Great capacity for contaminant retention. Longer durability. Low pressure drop. Multilayer structure (the fibers are thinner inside than outside the filter). The internal structure of the cartridge widens from the inside out, which increases the cartridge contaminant retention capacity and improves its useful life. According to the FDA regulations. Chemical resistance: 100% polypropylene.
details
Internal diameter (03):
28 mm.
Internal diameter (01):
25 mm.
Internal diameter (02):
25 mm.
External diameter (03):
111 mm.
External diameter (01):
114 mm.
External diameter (02):
114 mm.
Efficiency:
95%
Pressure:
6bar (87psi) max.
Max differential pressure:
0,8 bar (80 kpa.)
Temperature Rating:
176°F (80°C) max.
Flow rate 5 micron:
11,8 gpm (45L/min)
Flow rate 50 micron:
20 gpm (76,6L/min)
 
Customers Login
e-mail
password

Standard housings water purifiers filtration system purifiers polypropylene

www.sinergroup.it Everpure Filters