This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

13000006.jpgHome
 » 
Tester and rapid kit for analysis
 » 
Drop kit for analysis
order
other filters

Titrant Kit Total Hardness (1°F) single reagent 15cc.
Titrant Kit Total Hardness (1°F) single reagent 15cc.
13000001
TOTAL HARDNESS 1. Rinse test tube with the water to be analysed. 2. Fill test tube with the water to be analysed up to the 5 ml mark. 3. Add Titrant drop by drop mixing after each addition. Count the drops to the colour change from red to green. According to the Titrant used, in a 5 ml sample each drop corresponds to half the value indicated on the bottle, in a 10 ml sample each drop corresponds te half the value indicated on the bottle.
Total hardness kit (1°F)
Total hardness kit (1°F)
13000002
TOTAL HARDNESS Direction for use 1. Rinse the measuring vessel with the water to be tested and fill up the 5ml. mark. 2. Add 1-2 drops of indicator and swirl. In presence of hardness higher than 3 ppm CaCO3 a wine red colour will appear (A blue color indicates absence of hardness. With hardness lower than 3 ppm the colour of the sample shifts from violet. to grey to pink). 3.Add titrant drop by drop, mixing after each addition. Count the drops until the colour changes from red to blue. Each drop corresp
Total chlorine test
Total chlorine test
13000003
TOTAL CHLORINE (ideal for water with low content of organics, like drink water) SENSITIVITY: 0,1 ppm Cl2 * TEST QUANTITY: 75. KIT CONTAINS: 1 bottle 25cc reagent Total chlorine * 1 test tube 10cc with stopper * 1 color scale 0,1-1,5 ppm * use directions. SPARE PARTS: reagent Total chlorine, 6 bottles 25cc Code N° 3204 * test tube 10cc, 12 Code N° 3312 * 1 color scale 0,1-1,5 ppm, Code N° 3404.
Iron Kit test complete
Iron Kit test complete
13000008
KIT NAME: IPT FERRO ANALYSIS TYPE: colorimetric METHOD: 1.10-phenanthroline SENSIBILITY: 0.05 ppm Fe MEASURING RANGE: out of 20 ml 0,05-010-0,15-0,20 ppm Fe, risp. out of 5 ml 0,25-0,5-1,0-2,0-5,0-7,5-10-15 ppm Fe TEST QUANTITY: 100 (with scale 0,25 – 15 ppm) KIT CONTAINS: - 1 bottle 25cc Iron A reagent - 2 test tube 20cc with plug - 1 comparator - 1 color scale 0,25-15 ppm - 1 color scale 0,05-0,2 ppm - instructions OBSERVATIONS: - The 0.25-15 ppm color scale is used with a 5 ml sam
Nitrates test
Nitrates test
13000006
ANALYSIS TYPE: colorimetric METHOD: acid 5-hydroxysalicylic SENSITIVITY: 10 ppm NO3 MEASURES RANGE:10-20-40-60-80-100-120-140 ppm NO3 TEST QUANTITY: 50 KIT CONTENTS: 1x Nitrates A powder reagent bottle 2x 10cc test tubes with stopper 1x comparator 1x color scale 1x dosing spoon - instructions OBSERVATIONS: In the water treatment market often speaks of "nitric azote" (which corresponds to nitrates), of "nitrous azote" (which corresponds to nitrites), and "ammonia azote" (which corresponds t
Total pH complete test single reagent 15cc.
Total pH complete test single reagent 15cc.
13000007
Measuring range: 5,0-5,5-6,0-6,5-7,0-7,5-8,0-8,5-9,0-9,5 pH Sensitivity: 0,5pH Kit contains: - 1 bottle 15cc. reagent pH - 1 test tube 10cc. - 1 color scale - Use directions

www.sinergroup.it Everpure Filters