This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

Reverse Osmosis Direct Flow Water Purifiers RO Membranes Polypropylene CTO Carbon Block Filters Electronic Faucet Water Filtration System Drink More Water

order
other filters

Greenfilter RO membranes TFC 1812/2012/3012/3013 - 50, 75, 100, 150, 180, 300, 400 GPD
Greenfilter RO membranes TFC 1812/2012/3012/3013 - 50, 75, 100, 150, 180, 300, 400 GPD
090005
Definition Reverse osmosis process is based on nature and has been used for more than 30 years. These semi-permeable membranes only allow nearly pure water to flow through, by removing excessive salts during the process. Likewise, it also rejects bacteria and micro-organisms, heavy metals, virus. Type of membrane: Spiral wound Membrane consists of 3 layers 1. Cross linked fully aromatic polyamide 0.3 µm. 2. Polysulfone 45 µm . 3. Non woven fabric polyester 100 µm. Spacer: EPDM SPECIFICATIONS
Greenfilter RO encapsulated membranes TFC 50, 75, 100 GPD
Greenfilter RO encapsulated membranes TFC 50, 75, 100 GPD
090018
High efficiency, disposable encapsulate membranes. Change complete of vessel + membrane for maximum hygiene! These semi-permeable membranes only allow nearly pure water to flow through, by removing excessive salts during the process. Likewise, it also rejects bacteria and micro-organisms, heavy metals, virus. Type of membrane: Spiral wound Membrane consists of 3 layers 1. Cross linked fully aromatic polyamide 0.3 µm. 2. Polysulfone 45 µm . 3. Non woven fabric polyester 100 µm. Spacer: EPDM
Ionicore USmotic RO membranes TFC 2012 - 50, 75, 100, 150, 180 GPD (25)
Ionicore USmotic RO membranes TFC 2012 - 50, 75, 100, 150, 180 GPD (25)
090017
The reverse osmosis (abbreviation: RO, from English Reverse Osmosis) is the process which represents the better water filtration technique, because is not a simply unwanted substances reduction but is able to remove contaminants, harmful and mineral salts at ionic level. The RO membrane element are generally made of polyamide (PA). These R.O. TFC(thin film composite) membranes are available in flow rates ranging from 50 to 180 Gallons per day for use in standard residential membrane housings. All models
details
Permeate flow rate (+/-20%) 50:
50 Gpd (190 lt./day)
Permeate flow rate (+/-20%) 75:
75 Gpd (284 lt./day)
Permeate flow rate (+/-20%) 100:
100 Gpd (379 lt./day)
Permeate flow rate (+/-20%) 150:
150 Gpd (568 lt./day)
Permeate flow rate (+/-20%) 180:
180 Gpd (681 lt./day)
Minimum salt rejection:
96%
Stabilized salt rejection:
98%
Operating pressure test:
65 PSI
TDS feed test:
Tap Water (from 450 to 700 ppm)
Water temperature test:
77°F. (25°C.)
Recovery test:
15%
Max. operating pressure:
125 - 300 PSIG
Max. feed SDI:
5 (15 min)
Max. feed flow rate:
2 gal./min. (7,57 lt./min.)
Chlorine tolerance:
<0.1 ppm
Max. operating temperature:
113°F. (45°C.)
Ph range:
2-11
Max. feed water turbidity:
1 NTU
Membrane style:
Dry
 
Ionicore Keypra RO membranes TFC 1812/2012 - 50, 75, 100, 150, 200, 300 GPD (25)
Ionicore Keypra RO membranes TFC 1812/2012 - 50, 75, 100, 150, 200, 300 GPD (25)
090026
The reverse osmosis (abbreviation: RO, from English Reverse Osmosis) is the process which represents the better water filtration technique, because is not a simply unwanted substances reduction but is able to remove contaminants, harmful and mineral salts at ionic level. The RO membrane element are generally made of polyamide (PA). These R.O. TFC(thin film composite) membranes are available in flow rates ranging from 50 to 200 Gallons per day for use in standard residential membrane housings. All models
details
Permeate flow rate (+/-20%) 50:
50 Gpd (190 lt./day)
Permeate flow rate (+/-20%) 75:
75 Gpd (284 lt./day)
Permeate flow rate (+/-20%) 100:
100 Gpd (379 lt./day)
Permeate flow rate (+/-20%) 150:
150 Gpd (568 lt./day)
Permeate flow rate (+/-20%) 200:
200 Gpd (757 lt./day)
Permeate flow rate (+/-20%) 300:
300 Gpd (1.135 lt./day)
Minimum salt rejection:
97%
Stabilized salt rejection:
98%
Operating pressure test:
60 PSI
TDS feed test:
Tap Water (from 250 to 700 ppm)
Water temperature test:
77°F. (25°C.)
Recovery test:
15%
Max. operating pressure:
125 PSIG / 0.86 MPa (8,6 Bar)
Max. feed SDI:
5 (15 min)
Max. feed flow rate:
2 gal./min. (7,57 lt./min.)
Chlorine tolerance:
<0.1 ppm
Max. operating temperature:
113°F. (45°C.)
Ph range:
2-11
Max. feed water turbidity:
1 NTU
Membrane style:
Dry
 
Ionicore Keypra RO membranes TFC 3012/3013 - 300, 400 GPD (9)
Ionicore Keypra RO membranes TFC 3012/3013 - 300, 400 GPD (9)
090025
The reverse osmosis (abbreviation: RO, from English Reverse Osmosis) is the process which represents the better water filtration technique, because is not a simply unwanted substances reduction but is able to remove contaminants, harmful and mineral salts at ionic level. The RO membrane element are generally made of polyamide (PA). These R.O. TFC(thin film composite) membranes are available in flow rates ranging from 50 to 400 Gallons per day for use in standard residential membrane housings. All models
details
Permeate flow rate (+/-20%) 300:
300 Gpd (1.135 lt./day)
Permeate flow rate (+/-20%) 400:
400 Gpd (1.514 lt./day)
Minimum salt rejection:
97%
Stabilized salt rejection:
97%
Operating pressure test:
100 PSI
TDS feed test:
250 ppm
Water temperature test:
77°F. (25°C.)
Recovery test:
15%
Max. operating pressure:
300 PSIG / 2.06 MPa (20,6 Bar)
Max. feed SDI:
5 (15 min)
Max. feed flow rate:
2 gal./min. (7,57 lt./min.)
Chlorine tolerance:
<0.1 ppm
Max. operating temperature:
113°F. (45°C.)
Ph range:
3-10
Max. feed water turbidity:
1 NTU
Membrane style:
Dry
 
Pentair RO encapsulated membranes TLC GRO 36, 50, 75 GPD (16)
Pentair RO encapsulated membranes TLC GRO 36, 50, 75 GPD (16)
090019
GRO (Green RO) membranes are available for 3 types of flow rate: 36, 50 and 75 Gpd. They provide high quality reverse osmosis water while wasting 3 times less water to the drain. Features * TLC Thin Layer Composite membrane. * 100% dry membrane maximizing shelf life. * Double the recovery over standard RO elements. * High rejection stability at high input TDS. * Maximal Pressure: 6.90 bar. * Maximal Temperature: 49°C. * pH: 4-11. * Free Chlorine: 0.1 ppm. Connections: * Inlet w
Pentair RO membranes TLC 50, 75, 100 GPD (25)
Pentair RO membranes TLC 50, 75, 100 GPD (25)
090012
TLC™ RESIDENTIAL RO MEMBRANES The best way to assess the overall filtration quality of a RO system is made by measuring the rejection, which is the percentage of total dissolved solids removed from the inlet water. In other words, the higher the rejection, the better the membrane performs. The recovery of a RO system represents the quantity of permeate produced compared with the quantity of concentrate rejected to the drain. The higher the recovery, the lower the rejection is. RO MEMBRANE’S CONSTRUCT
AMI RO membranes TFC 1812/3012 100, 150, 300 GPD (25)
AMI RO membranes TFC 1812/3012 100, 150, 300 GPD (25)
090007
AMI Membrane home membrane elements, are among the finest in the industry. With hundreds of thousands of membranes in operation world-wide, we offer these in a large range of both residential and commercial sizes AMI Membranes are Made in the USA in our ISO 9001:2008 Certified Facilities. For the past 30 years AMI Membrane elements have earned the reputation of consistent quality. Recommended Operating Conditions (50, 75, 100, 150GPD) - Maximum operating pressure: 125psi (8,61bar) - Maximum feed
NF90-2012 nanofiltration RO membrane - 180GPD (25)
NF90-2012 nanofiltration RO membrane - 180GPD (25)
090006
ASPRING offers a full line of RO membrane elements in polyamide composite. The polyamide composite membrane elements display an outsdanding salt rejection of more than 97%, superior product water flow, high thermal and pressure durability, wide tolerance of chlorine and PH. Specifications of product Membrane 180GPD Cod. 090006-01 NF90-2012: - NaCl Rejection: >90% ±2% - MgSO4 Rejection >96% - Permeate flow rate: 180GPD Test condition - Applied pressure: 150PSI (10,34BAR)
Housings 2,5" for reverse osmosis membrane 1812, 2012 - 50, 75, 100, 150, 180 GPD
Housings 2,5" for reverse osmosis membrane 1812, 2012 - 50, 75, 100, 150, 180 GPD
090002
With double o-ring. Connections * Inlet: 1/8" * Outlet/Drain: 1/8"
Vessel for reverse osmosis membrane 3012 - 300GPD
Vessel for reverse osmosis membrane 3012 - 300GPD
090021
Connections * Inlet: 1/4" * Outlet/Drain: 1/8"
Vessel for reverse osmosis membrane 3013 - 400GPD
Vessel for reverse osmosis membrane 3013 - 400GPD
090022
Connections * Inlet: 1/4" * Outlet/Drain: 1/8"
Ionicore RO membranes TFC LP2521, LP2540, LP4040 Medium pressure
Ionicore RO membranes TFC LP2521, LP2540, LP4040 Medium pressure
090023
The reverse osmosis (abbreviation: RO, from English Reverse Osmosis) is the process which represents the better water filtration technique, because is not a simply unwanted substances reduction but is able to remove contaminants, harmful and mineral salts at ionic level. The RO membrane element are generally made of polyamide (PA). These R.O. TFC(thin film composite) membranes are available with different flow rates. All models are certified to NSF/ANSI 58 for the reduction of Arsenic ("V" pentavalent),
details
Permeate flow rate (+/-20%) LP2521:
300 gal./giorno (1.135 lt./giorno)
Permeate flow rate (+/-20%) LP2540:
750 gal./giorno (2.839 lt./giorno)
Permeate flow rate (+/-20%) LP4040:
2.500 gal./giorno (9.463 lt./giorno)
Minimum salt rejection:
98%
Stabilized salt rejection:
99%
Operating pressure test:
150 PSI (10,3 Bar)
TDS feed test:
1500 ppm
Water temperature test:
77°F. (25°C.)
Recovery test:
15%
Ph test:
7,5
Max. operating pressure:
600 PSIG / 4.23 MPa (42,3 Bar)
Max. feed SDI:
5 (15 min)
Max. feed flow rate:
16 gal./min. (60,55 lt./min.)
Chlorine tolerance:
<0.1 ppm
Max. operating temperature:
113°F. (45°C.)
Ph range:
3-10
 
Housing 4" for reverse osmosis membrane 4040x1 - 300psi-EP Greenfilter
Housing 4" for reverse osmosis membrane 4040x1 - 300psi-EP Greenfilter
090020
Features: * Made of fiber reinforced polyester. * Front connection, permeate the collection at both ends. * Close by blocking half-length AISI-304 easy membrane replacement. * EPDM seals. ABS collector plugs. * Compatible with standard 4 "membranes. * Support brackets included. Connections: * Inlet: 1/2" BSP F. * Outlet/Drain: 3/4" BSP F Technical features: * Pressure: 21 kg/cm2, 21 bar (300 psi) * Permeate internal pressure: < 8,8kg/cm2, 7
Customers Login
e-mail
password

DMfit quick fit fittings hand valves acetalic resin inch size food&drink beverage compressed air flow systems

www.sinergroup.it Everpure Filters