Replacement By-pass for Runxin Valves Once installed on the valve, the by-pass allows to regulate the water hardness and the flow rate of the water during the regeneration process. Runxin replacement by-pass F70A - F70B settings and installation Specifically, it is possible to choose between different settings acting on the ring on the body of the by-pass. Scale from "1" to "4": starting from "1" (water completely softened and little flow rate to the home water supply during the regenera

F73 Twin Alternating Softener Configuration (one valve with 2 pressure vessels) Indicated for automatic residential water softeners; the valve body is made of Noryl plastic material. Regeneration, Automatic meter-time or manual. (Hardness regulation of the outlet water with the by-pass.) With a flow rate of 3,0m3/h, the F73 twin alternating softener configuration is widely used for its ability to carry out service, backwash, brine and slow rinse, brine refill, and a fast rinse through simple parameter m

The Runxin F56A and F56F manual valves are primarily designed for filtration systems. Once the pressure vessel is filled with sand, carbon, or other filtering media, these valves allow the water to be effectively treated by enabling filtration, rinsing, and backwashing operations. All functions are controlled through a single lever located on the top of the valve. - Filtration: the valve allows water to flow through the filter for treatment. - Rinse: the water flow is reversed to clean the filter. -

Indicated for automatic residential water filtration; the valve body is made of Noryl plastic material. Regeneration, Automatic meter-time or manual. Box content: 1x Control Valve. 1x Ballast 100-240V ~ 50/60Hz 0.6A max (12v - 1.5A). 1x Interconnection cable 1,2 mt. 1x 1" Drain line female thread. 1x 1" Out-let flow meter connector. 1x 1" Water in-let connector. 1x valve base seal rings. 4x Washer 1". Technical specifications: - Flow rate: 4,0 m3/h. - Regeneration mode: Do

Body: Open valve carter with window. * Brine cover.

Body: Open valve carter with window. * Brine cover.

Body: Open valve carter with window. * Brine cover. * Base.

Body: Open valve carter with window. * Brine cover. * Base.

Body: Open valve carter with window. * Brine cover. * Base. * Side sheet. Tank and brine solution are separated, Do not suffer deformations, The maintenance is quick and easy, More hygiene, Easy to customize.

Body: Open valve carter with window. * Brine cover. * Base. * Side sheet. Tank and brine solution are separated, Do not suffer deformations, The maintenance is quick and easy, More hygiene, Easy to customize.

> The first cabinet with built-in salt well. > No holes and no connections. > Top-handiness. > Quick and easy maintenance. > Tank and brine solution are separated. > Easy to customize. > Innovative design. Body: Open valve carter. * Brine cover. * Salt well cap. * Base.

Body: Clear open valve carter * Brine cover.

Body: Clear open valve carter * Brine cover.

30lit. model (cod. 15015005-01) - Dimensions (mm.) (ODxH) 340 x 470 200lit. model (cod. 15015005-06) - Dimensions (mm.) (ODxH) 530 x 1.050 300lit. model (cod. 15015005-07) - Dimensions (mm.) (ODxH) 735 x 1.180 500lit. model (cod. 15015005-08) - Dimensions (mm.) (ODxH) 910 x 1.130 700lit. model (cod. 15015005-09) - Dimensions (mm.) (ODxH) 970 x 1.180 1.000lit. model (cod. 15015005-10) - Dimensions (mm.) (ODxH) 1.120 x 1.180

Features • Modern innovative style • Designed for Siata valves V132, Fleck valves 4600, 5000, 5600, 6600, 6700 and Autotrol 255 • Available for 18 inches pressure vessels • Direct access to the timer functions and salt loading without removing the cover, but simply by lifting the cover lid • Bespoke cover and cabinet colors on request • Blow-molded cabinet with injection-molded cover • Molded feature allowing fitting a baseless pressure vessel at the bottom of the cabinet • ROHS certified colouring

Features • Modern innovative style • Designed for Siata valves V132, Fleck valves 4600, 5000, 5600, 6600, 6700 and Autotrol 255 • Available for 30 inches pressure vessels • Direct access to the timer functions and salt loading without removing the cover, but simply by lifting the cover lid • Bespoke cover and cabinet colors on request • Blow-molded cabinet with injection-molded cover • Molded feature allowing fitting a baseless pressure vessel at the bottom of the cabinet • ROHS certified colouring

Features • Material: high density polyethylene • Moulding: blow-moulded • Suitable to contain potable water • Designed to accomodate brine well 35lit. model (cod. 15015501-01) • Dimensions in cm (HxWxD) 44x31x31 • Capacity (1st fill)* kg: 20 75lit. model (cod. 15015501-01) • Dimensions in cm (HxWxD) 89x31x31 • Capacity (1st fill)* kg: 40 * Capacity of salt in indicated for first fill, and is subjected to variation

Features • Material: HDPE (high density polyethylene) • Moulding: rotomoulding • Suitable to contain potable water 150lit. Model (cod. 15015502-04) • Dimensions in cm (HxØ) 75x51 300lit. Model (cod. 15015502-06) • Dimensions in cm (HxØ) 106x71 • Capacity (1st fill)* kg: 150 • Conical tank with graduated capacity scale 520lit. Model (cod. 15015502-07) • Dimensions in cm (HxØ) 113x91 • Capacity (1st fill)* kg: 250 • Conical tank with graduated capacity scale 850lit. Model (cod. 15015502-

Features • Material: PVC tube with slotted end 15015504-01 Dimensions(mm.): Ø100 - h390 Compatible with: 15015011-02 CLY Mini Cabinet, 15015501-01 PROTANK brine tank 35lit. 15015504-02 Dimensions(mm.): Ø100 - h820 Compatible with: 15015013-01, 15015013-02, 15015013-03 CLY Maxi Cabinet, 15015501-02 PROTANK brine tank 75lit. 15015504-03 Dimensions(mm.): Ø100 - h603 Compatible with: 15015502-03 PROTANK brine tank 100lit. 15015504-04 Dimensions(mm.): Ø100 - h721

Features: - Blow-molded from high quality NSF approved high density polyethylene providing exceptional crack resistance - Seamless one-piece construction with molded handles for easy handling and tight fit lid for security - Stackable, lightweight desi

Features: - Blow-molded from high quality NSF approved high density polyethylene providing exceptional crack resistance - Seamless one-piece construction with molded handles for easy handling and tight fit lid for security - Stackable, lightweight design - Brine valve with Safety (standard) or optional air-check - Salt grid with removable legs for compact shipment - 10 Year Guarantee To buy with every brine tank: 1x 15000421 Overflow Elbow 90° / Thread

Features: - Stackable, lightweight design; - Brine valve with Safety (standard). To buy with every brine tank: 1x 15000444 Overflow Elbow / Thread ring 1" - White 350lit. model (cod. 15015507-01) - Dimensions (ODxH) 740×1275mm - Salt capacity: 210 kg ( 462 Lbs) - Liquid volume: 350 lit. (93 US Gal) - Drain: no 500lit. model (cod. 15015507-02) - Dimensions (ODxH) 840×1335mm - Salt capacity: 300 kg ( 661 Lbs) - Liquid volume: 500 lit. (132 US Gal) - Drain: 1"