Softening of next-generation valve volume and easy programming. Dayton delayed regeneration valve 859D to mixing valve to adjust the hardness out. Bypass installation included. Electronic controller integrated into the top cover. Pre-assembled and tested system for a easier installation and start-up. Battery incorporated for dinamic memory. Four different regeneration: Time initiated - Delayed regenerations according to selected frequence (Ex: Softener will regenerate every three days at 02:00AM). Meter imm

The CS water softeners range make of simplicity their point of strength. They have a volumetric valve and can be setted with four kind of regeneration: mixed time/volume regeneration, Time delayed, meter immediate, meter delayed. Time Delayed - Is a delayed regenerations according to selected frequence, Meter immediate - Regenerations are started after treating the programmed volume of water, Meter delayed regenerations - Regenerations are started after treating the programmed volume of water at the program

The CS water softeners range make of simplicity their point of strength. They have a volumetric valve and can be setted with four kind of regeneration: mixed time/volume regeneration, Time delayed, meter immediate, meter delayed. Time Delayed - Is a delayed regenerations according to selected frequence, Meter immediate - Regenerations are started after treating the programmed volume of water, Meter delayed regenerations - Regenerations are started after treating the programmed volume of water at the program

The CS water softeners range make of simplicity their point of strength. They have a volumetric valve and can be setted with four kind of regeneration: mixed time/volume regeneration, Time delayed, meter immediate, meter delayed. Time Delayed - Is a delayed regenerations according to selected frequence, Meter immediate - Regenerations are started after treating the programmed volume of water, Meter delayed regenerations - Regenerations are started after treating the programmed volume of water at the program

The CS water softeners range make of simplicity their point of strength. They have a volumetric valve and can be setted with four kind of regeneration: mixed time/volume regeneration, Time delayed, meter immediate, meter delayed. Time Delayed - Is a delaye

The CS water softeners range make of simplicity their point of strength. They have a volumetric valve and can be setted with four kind of regeneration: mixed time/volume regeneration, Time delayed, meter immediate, meter delayed. Time Delayed - Is a delayed regenerations according to selected frequence, Meter immediate - Regenerations are started after treating the programmed volume of water, Meter delayed regenerations - Regenerations are started after treating the programmed volume of water at the program

One step regeneration shower softener. No electricity required. Easy installation. One step only to complete regeneration process. Slide cover for water proof. Maximum water temperature working: 60°C.

The CS water softeners range make of simplicity their point of strength. They have a volumetric valve and can be setted with four kind of regeneration: mixed time/volume regeneration, Time delayed, meter immediate, meter delayed. Time Delayed - Is a delayed regenerations according to selected frequence, Meter immediate - Regenerations are started after treating the programmed volume of water, Meter delayed regenerations - Regenerations are started after treating the programmed volume of water at the program

The CS water softeners range make of simplicity their point of strength. They have a volumetric valve and can be setted with four kind of regeneration: mixed time/volume regeneration, Time delayed, meter immediate, meter delayed. Time Delayed - Is a delayed regenerations according to selected frequence, Meter immediate - Regenerations are started after treating the programmed volume of water, Meter delayed regenerations - Regenerations are started after treating the programmed volume of water at the program

ERGO Volumetric Water Softeners. Work without power supply. Designed according to the needs of installation technicians and professionals of the water treatment branch, the ERGO equipment has the most advanced technology to facilitate installation and maximise reliability. The ERGO valve, made of Noryl, has a totally hydraulic system and works without electricity. The DIRECT ACCESS system makes programming easier and guarantees a correct commissioning. ERGO includes th

The S134 water softener is a device which combines the best performances to the minimum space.The metered-time valve equipped in the water softener, will allow you to select the regeneration mode most suited to your needs. Once all the desired paremeters will be setted, the water softener will works in complete autonomy and automatically, without the need of any manual operation. After the correct electric and hydraulic connections, the customer will only have to ensure that inside the device there is the s

Latest generation water softeners with volumetric valve. These systems are equipped with a mixing valve to adjust the water hardness at the outlet and an integrated bypass to simplify installation. Four different types of regeneration: Time initiated (after the programmed number of days), Meter immediate (when a certain amount of water passes through), Delayed regenerations (based on the water volume and the programmed time), Mixed regenerations (similar to delayed regeneration, but allows programming a saf

Automatic water softening device. BNT1650F valve with Volume/time regeneration. The valve is fully programmable and its programming is quick and easy. Complete with 230V - 50Hz power supply socket. Output hardness regulator integrated into the valve body, by turning the adjustment knob you will mix the raw water with the appliance softened water. An outlet hardness of about 15°F is recommended, however, the most frequently used setting is not less than 5°F. To mix a specific output hardness value, turn the

Automatic water softener. The BNT650 is a user friendly valve with mechanic regulation. Thanks to its fixed-clicks timer, you will be able to set the regeneration intervals based on the desired timing. Indicated for commercial and residential usages, the valve can be used both for softening or filtration, with pressure vessels with diameter up to 16"; the valve's body is made of Noryl plastic material. Complete with ballast 110/240V - 50/60Hz. The hardness regulation of the outlet water can be adjusted w

Automatic water softener. Electronic AUTOTROL valve 255/740 Logix 1" (Reg. Time). Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at night. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Clutching the set screw is going to open the clapper by-pass, which allow you to mix raw water with water treated by device. At the first turn of the screw, the water hardness

Automatic water softener Electronic WS1CI Clack valve 1 " (Reg. Metered-time).Low consumption of water and salt per regeneration. Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at night, number of days between regenerations and hardness input. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Is required output minimum hardness of around 15°F, but the most commonl

Automatic water softener Electronic WS1TC Clack valve 1 " (Reg. Time).Low consumption of water and salt per regeneration. Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at night, number of days between regenerations and hardness input. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Is required output minimum hardness of around 15°F, but the most commonly used

Automatic water softener Electronic WS1CI Clack valve 1 " (Reg. Metered-time).Low consumption of water and salt per regeneration. Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at night, number of days between regenerations and hardness input. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Is required output minimum hardness of around 15°F, but the most commonl

Automatic water softener Electronic WS1CI Clack valve 1 " (Reg. Metered-time).Low consumption of water and salt per regeneration. Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at night, number of days between regenerations and hardness input. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Is required output minimum hardness of around 15°F, but the most commonl

Automatic water softener. Electronic AUTOTROL valve 255/760 Logix 1" (Reg. Metered-time). Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at night, number of days between regenerations and hardness input. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Clutching the set screw is going to open the clapper by-pass, which allow you to mix raw water with water treat

Automatic water softener. Electronic AUTOTROL valve 255/760 Logix 1" (Reg. Metered-time). Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at night, number of days between regenerations and hardness input. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Clutching the set screw is going to open the clapper by-pass, which allow you to mix raw water with water treat

FLECK 5600 SXT Electronic valve Automatic meter/time regeneration. Program with high performance which allows a low water and salt per regeneration consumption. Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter time, day of week, time of regeneration, typically 02.00 at night, number of days between regenerations and hardness input. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Is raccomended a minimum hardness in output o

Evolio has been developed as an easy-to-use complete softener with a modern and attractive design. Each version is available in 4 different sizes. The timer is mounted on the top cover, facilitating the access to the softener data, easily readable thanks to the 20° display inclination. Moreover, the large salt opening makes Evolio softener ergonomic and simplifies the salt refill operation. Integrated bypass Benefits and advantages Reduction of water hardness, which is cause of scale. ENERGY SAVING:

This is a water softener elegant design that gives you the feeling of luxury water. Reduces the unpleasant limestone around the tub and the sink. It will save you money on your heating bill and reduce the consumption of all detergents and cleaning products. The water pipes will always be clean and free from fouling, clogging and damage. In all the water circuit there will be more pressure losses or water flows minors. Efficient and carbon neutral The Peanut 368 water softener has been shown to save up

BNT650T valve 1" with mechanic regulation, regeneration time. Low consumption of water and salt per regeneration. Extremely easy programming thanks to its fixed-clicks timer on which you can set regeneration intervals based on the desired time. Hardness regulator output Is required output minimum hardness of around 15°F, but the most commonly used setting is not less than 5°F. Loosening action will reduce mixing with raw water output. To mix a specific output hardness value, adjust screw and test w

Automatic water softener electronic BNT1650F valve 1", regeneration metered-time. Low consumption of water and salt per regeneration. Programming is simple and fast - Insertion the time. - Insertion day of week. - Time of regeneration. - Number of days between regenerations. - Hardness input. Hardness regulator output Is required output minimum hardness of around 15°F, but the most commonly used setting is not less than 5°F. Loosening action will reduce mixing with raw water outp

Automatic water softener. Electronic WS1CI Clack valve 1 " (Reg. Metered-time).Low consumption of water and salt per regeneration Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at night, number of days between regenerations and hardness input. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Is required output minimum hardness of around 15°F, but the most common

Automatic water softener. Electronic WS1TC Clack valve 1 " (Reg.Time).Low consumption of water and salt per regeneration Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at night, number of days between regenerations and hardness input. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Is required output minimum hardness of around 15°F, but the most commonly used

Automatic water softener. Electronic AUTOTROL valve 255/760 Logix 1" (Reg. Metered-time). Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at nigh