Languages
Products
060131
Features:
Nominal Voltage: 230VAC;
Frequency: 50/60Hz;
Inlet Pressure: 0,2MPa;
Working Pressure: 0,7MPa;
Working current: 0,55A;
Maximum current: 0,80A;
Working Flow: 4LPM;
Bypass pressure: 1,05~1,2 MPa;
Water Temparature: 38°C;
Dimensions: 218x105mm.
060132
Features:
Nominal Voltage: 230VAC;
Frequency: 50/60Hz;
Inlet Pressure: 0,2MPa;
Working Pressure: 0,5MPa;
Working current: 0,17A;
Maximum current: 0,28A;
Working Flow: 1,5 LPM;
Bypass pressure: 0,85~1,00 MPa;
Water Temparature: 38°C.
060138
Features:
Nominal Voltage: 24VDC;
Connections: 3/8" NPT;
Inlet Pressure: 0,2MPa;
Outlet Pressure: 0,7MPa;
Working current: 4,5A;
Maximum current: 5A;
Working Flow: 3,5LPM;
Bypass pressure: 0,85~1,05 MPa.
060140
Features:
Nominal Voltage: 230VAC;
Frequency: 50/60Hz;
Inlet Pressure: 0,2MPa;
Working Pressure: 0,7MPa;
Working current: 0,65A;
Maximum current: 0,80A;
Working Flow: 4LPM;
Bypass pressure: 1,05~1,2 MPa;
Water Temparature: 38°C;
Dimensions: 189x98mm.
060133
Features:
- INPUT: 100-240V - 50/60Hz - 1,5A.
- OUTPUT: 24V - 1,7A
060134
Features:
- INPUT: 100-240V - 50/60Hz - 3A.
- OUTPUT: 24V - 2,5A
060135
Features:
- INPUT: 100-240V - 50/60Hz - 3A.
- OUTPUT: 36V - 3A
060139
Features:
- INPUT: 100-240V - 50/60Hz - 3A.
- OUTPUT: 24V - 5A
060076
Factory Calibration: 36,26 psi (2,5 bar)
060122
Factory Calibration: 36,26 psi (2,5 bar)
060027
15 - 30 psi (1 psi = 0.07 bar) adjustable high-pressure pressure
switch for equipment with pump.
20 - 40 psi (1 psi = 0.07 bar) adjustable high-pressure pressure
switch for equipment with pump.
060024
The FS-2000(H) flow sensor comes with a reed switch or Hall effect switch which delivers a switch signal or digital signal to electronic control unit when it is activated by the magnetic force of the flow sensor turbine. It can detect water flow from 1.7 to 14.1 L /min.
The connection of the FS-2000(H) is 3/ 8” NPT female.
Its body and turbine are made of acetal copolymer (POM) material.
The best location to connect the FS-2000(H) is on the outlet channel of the filter.
Because it's sensitive to rust an
060146
Features:
- Stainless steel sensor.
- Probe: 1/4"
- Cable:120 cm, 4-wire (48inch)
- Connectors: No
- Thermometer pin:Yes
- Max pressure: 10bar
- TDS range: 0-1000ppm
060147
1/4" and 3/8" TDS sensors probe with connectors
Features cod. 060147-01
- Stainless steel sensor.
- Probe: 1/4"
- Cable:45cm, (18inch)
- Connector: 2 line 4-pin.
- Thermometer pin: Yes
- Max pressure: 400bar
- TDS range: 0-2000ppm
Features cod. 060147-02
- Stainless steel sensor.
- Probe: 3/8"
- Cable:45cm, (18inch)
- Connector: 2 line 4-pin.
- Thermometer pin: Yes
- Max pressure: 400bar
- TDS range: 0-2000ppm
060045
Inner membrane: butyl
Inner covering: Polypropylene liner
Max. work pressure 7 kg/cm2.
Preloading pressure 0.5 kg/cm2.
Diameter: 210mm.
Height: 340mm.
060061
Inner membrane: butyl * Inner covering: Polypropylene liner * Max. work pressure 7 kg/cm2. * Preloading pressure 0.5 kg/cm2. * Diameter: 202mm. * Height: 260mm. * Connection 1/4"
060047
Inner membrane: butyl
Inner covering: Polypropylene liner
Max. work pressure 7 kg/cm2.
Preloading pressure 0.5 kg/cm2.
Diameter: 230mm.
Height: 360mm.
060046
060046-S
- Inner membrane: Butyl
- Inner covering: Food grage polypropylene
- Max. work pressure: 6,9bar / 100Psi
- Preloading pressure: 0,5bar / 7Psi
- Min. temperature: 4°C / 40°
Bestsellers
Reverse osmosis - spare parts solenoid valves sensors
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Most viewed
Reverse osmosis - spare parts solenoid valves sensors
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
