Informations
Code:
060024
Weight:
0.1 Kg
Description
In-line flow sensor
click on images to enlarge
Full description
The FS-2000(H) flow sensor comes with a reed switch or Hall effect switch which delivers a switch signal or digital signal to electronic control unit when it is activated by the magnetic force of the flow sensor turbine. It can detect water flow from 1.7 to 14.1 L /min.
The connection of the FS-2000(H) is 3/ 8” NPT female.
Its body and turbine are made of acetal copolymer (POM) material.
The best location to connect the FS-2000(H) is on the outlet channel of the filter.
Because it's sensitive to rust and dirt. It could be installed at vertical or horizontal position.
For most of residential water filters and coolers, the FS-2000(H) is an ideal flow measurement and control solution for filter life or water dispensation monitor , it detects precisely, works reliable and is most affordable. The FS-2000(H) is compatible with the PWA 608M , the electronic flow monitor control board and the PWA608T, the electronic flow totalizer control board.
Switching Voltage : Max. 200 Volts
Switching Current : Max. 0.5 Amps
Carry Current : Max. 1.5 Amps
Switching Frequency : Max. 500 Hz
Contact Resistance : Max. 150 mO
Life Expectancy : 1 x 108 Ops
Mounting Method: Horizontal to Vertical
Flowing Direction: Bi-Direction
Flow Rate:
Maximum 3.72 gpm, 14.1 lpm (vertical and horizontal mounting)
Minimum 0.40 gpm, 1.50 lpm (horizontal mounting)
Minimum 0.26 gpm, 1.00 lpm (vertical mounting)
Calibration:
0.00106 gallon, 0.004 liter per pulse 0.00088 gallon, 0.0033 liter per pulse (vertical mounting)
Connection: 3/8 inch NPT Female
Temperature: 0 to 40? (32 to 104 ?)
Pressure: Max. 6.0 bar (85 psi)
Weight: 50g (1.92 oz.)
Accuracy: +/- 10%
Materials: Sensor Body : Acetal Copolymer, TICONA M90
Turbine: Acetal Copolymer, TICONA M90
Stick of Turbine: #304 Stainless Steel
O-Ring: E.P.D.M.