Languages
Products
15000206
Automatic water softener. The BNT650 is a user friendly valve with mechanic regulation. Thanks to its fixed-clicks timer, you will be able to set the regeneration intervals based on the desired timing.
Indicated for commercial and residential usages, the valve can be used both for softening or filtration, with pressure vessels with diameter up to 16"; the valve's body is made of Noryl plastic material.
Complete with ballast 110/240V - 50/60Hz.
The hardness regulation of the outlet water can be adjusted w
15000207
Automatic water softener. Electronic AUTOTROL valve 255/740 Logix 1" (Reg. Time). Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at night. Complete with plug adapter 12/230V - 50Hz European plug.
Hardness regulator output. Clutching the set screw is going to open the clapper by-pass, which allow you to mix raw water with water treated by device. At the first turn of the screw, the water hardness
details
Dimensions ØxH (mm.) - 8lit.:
203x632
Pressure vessel - 8lit.:
8"x17"
Brine tank ØxH (mm.) - 8lit.:
340x470 - capacity salt 30lit.
Dimensions ØxH (mm.) - 12lit.:
178x959
Pressure vessel - 12lit.:
7"x30"
Brine tank ØxH (mm.) - 12lit.:
340x470 - capacity salt 30lit.
Dimensions ØxH (mm.) - 15lit.:
196X1.087
Pressure vessel - 15lit.:
7"x35"
Brine tank ØxH (mm.) - 15lit.:
340x905 - capacity salt 75lit.
Dimensioni ØxA (mm.) - 20lit.:
203x1.087
Pressure vessel - 20lit.:
8"x35"
Brine tank ØxH (mm.) - 20lit.:
340x905 - capacity salt 75lit.
Dimensions ØxH (mm.) - 25lit.:
228x1.091
Pressure vessel - 25lit.:
9"x35"
Brine tank ØxH (mm.) - 25lit.:
340x905 - capacity salt 75lit.
Dimensions ØxH (mm.) - 30lit.:
254x1.087
Pressure vessel - 30lit.:
10"x35"
Brine tank ØxH (mm.) - 30lit.:
340x905 - capacity salt 75lit.
Dimensions ØxH (mm.) - 35lit.:
254x1.318
Pressure vessel - 35lit.:
10"x44"
Brine tank ØxH (mm.) - 35lit.:
340x1.160 - capacity salt 100lit.
Dimensions ØxH (mm.) - 40lit.:
254x1.318
Pressure vessel - 40lit.:
10"x44"
Brine tank ØxH (mm.) - 40lit.:
340x1.160 - capacity salt 100lit.
Dimensions ØxH (mm.) - 50lit.:
254x1.575
Pressure vessel - 50lit.:
10"x54"
Brine tank ØxH (mm.) - 50lit.:
530x800 - capacity salt 150lit.
Dimensions ØxH (mm.) - 60lit.:
254x1.722
Pressure vessel - 60lit.:
12"x48"
Brine tank ØxH (mm.) - 60lit.:
530x800 - capacity salt 150lit.
Dimensions ØxH (mm.) - 70lit.:
330x1.580
Pressure vessel - 70lit.:
13"x54"
Brine tank ØxH (mm.) - 70lit.:
530x800 - capacity salt 150lit.
Dimensions ØxH (mm.) - 75lit.:
330x1.580
Pressure vessel - 75lit.:
13"x54"
Pressure vessel - 75lit.:
530x800 - capacity salt 150lit.
Dimensions ØxH (mm.) - 80lit.:
330x1.575
Pressure vessel - 80lit.:
13"x54"
Brine tank ØxH (mm.) - 80lit.:
530x1.050 - capacity salt 200lit.
000092
Sold by the meter.
Features:
- Roll lenght: 50m. (164ft.);
- OD 12,5mm. (1/2");
- Flexible;
- Anti alga;
- Operating temperatures from -10°C to 40°C;
- Pressure 8 Bar;
- 8 years warranty.
000093
Sold by the meter.
Features:
- Roll lenght: 25m. (82ft.);
- OD 19mm. (3/4");
- Flexible;
- Anti alga;
- Operating temperatures from -10°C to 40°C;
- Pressure 8 Bar;
- 8 years warranty.
15000407
OPERATION:
Connect the probe on your softener brine line (use the necessary adapters). Check how many liters of resin are there in your softener (look on softener manual). Make sure that the plug of Our generator is disconnected. On the generator's board there is a trimmer that can be setted from 1 to 70 minutes of timer. Every minutes that you program can disinfect 1 lt of resin. The system is ready to start.
How it works:
The softener during regeneration aspires the brine, our system feels the passage
15000402
Replacement parts chlo active
Articles to assemble: J173-CPR16IS JG replacement O-ring OD tube 1/2" (x3pcs.) + S001-4200 Straight adaptor OD Tube - M. thread 3/8" x 3/8" (x2pcs.)
15000435
Specifications
Power: 200mA
Connection: QC 3/8" tube
Total Chlorine Generation: 1.8ppm @ 2.0L/M Saturated Brine draw rate.
Salt Alarming: Detect the salt volume in the brine tank simultaneously, alarm if salt is lack(85HE PCB only current).
Principal of Work
The generator can be installed into the normal Brine Line to produce chlorine through electrolytic reaction during the Brine.
Draw cycle, thus killing the bacteria or other relevant microbes that affect the water quality in the co
15000415
Automatic disinfection system for water softener from 0 to 350 lt. resin.
An automatic chloration of ion exchangers in residential water softeners is already required in most European countries. Even if it is not always compulsory, a periodic chloration is often advised in order to avoid bacteriological growth, which can affect softened water characteristics. The automatic disinfection system for softeners Steril-Soft Pro:
* Generates chlorine by brine electrolysis during regeneration.
* The chlorine
15000416
Automatic disinfection system for water softener from 0 to 90 lt. resin.
Titanium electrode not included.
15000439
The brine valve have to be chosen based on the height of the pressure vessel installed in the water softener. In any case, the valves are suitable by adjusting the height to the pressure vessel used. Just follow the instructions below:
15000439-01:
Brine valve suitable for all the pressure vessels with height 17"
15000439-02:
Brine valve suitable for all the pressure vessels with height 35"
15000439-03:
Brine valve suitable for all the pressure vessels with height 44"
15000428
Thanks to the small grid on the float valve bottom, any infiltration of undissolved salt is reduced.
Bestsellers
Water softeners
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Most viewed
Water softeners
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
