Shower filter complete system

Shower filter complete system

The main function of this shower filter is to reduce the suspended particles, organics, heavy metals, as chlorine and chlorinated lime, taste and odor, in water to refresh your skin and hair.
The filter cartridge is replaceable, please replace it regularly to ensure the performance.

Technical data
- Flow Rate: 5L/min
- Feed Water Pressure: 0.1-0.4Mpa
- Feed Water: Municipal tap water
- Working temperature: 5-45°C

Composition of the filter:
PP sediment
Calcium sulfite granules
High quality coconut carbon
KDF
Vitamin C mineral balls
Far infrared mineral balls

Installation
Warning: please make sure the seal ring is in the correct position.
a) Take off the flexible pipe of shower and install the shower filter on it (the female end will connect with main water valve).
b) Connect the other end of this shower filter (male end) to the flexible pipe.
c) Let the water flush through the shower filter for one minute before use.

Replacement of filter cartridge
Warning: please make sure the seal ring is in the correct position.
1. Remove the whole shower filter from its position.
2. Take off the filter cap by turning it anticlockwise.
3. Insert a new filter cartridge and tighten the filter cap by turning it clockwise.
4. After replacement, install the complete shower filter back to its position.

Service life:
3-6 months (it may vary because of different feed water condition and frequency of use).