This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

Runxin water F68 softeners residential valves regeneration meter time by-pass Up-flow hardness regulation

order
other filters

Chassis back plug for hole OD from 15 to 18 mm.
Chassis back plug for hole OD from 15 to 18 mm.
04704713
Material:ABS Dimensions: 21,5x12x2 mm. Metal sheet thickness: 0,8-3,2 mm.
Chassis back plug for hole OD from 18,4 to 22 mm.
Chassis back plug for hole OD from 18,4 to 22 mm.
04704752
Material:ABS Dimensions: 25,3x12,7x2 mm. Metal sheet thickness: 0,8-3,2 mm.
Quick Check TDS/Conductivity Monitor
Quick Check TDS/Conductivity Monitor
060016
Press the "Push-to-Check" button for an instant water quality check. Features - With the push of a button, the unit displays a green or red light, indicating good water quality or service required, respectively. - Tests for TDS or conductivity
Quick Check TDS LCD Monitor
Quick Check TDS LCD Monitor
060017
Ideal for any water filtration system, including reverse osmosis systems, coolers and much more. Features - Displays TDS level of a single water line. - Highly efficient and accurate due to its advanced microprocessor technology. - Auto-Off fu
In-Line Dual TDS in-out meter monitor for water
In-Line Dual TDS in-out meter monitor for water
060126
Measure the tap water coming in vs. the purified water going out of your water filtration system at any time. Specification: - Range: 0-1999 mg/lt. (ppm); - Resolution: 1mg/lt. (ppm); - Accuracy: ±2% F.S; - Power supply: 4x1,5 V. (AG13); - Automatic temperature compensation: 0-50 °C - Dimensio
Dual TDS Sensor Probes for the DM-1
Dual TDS Sensor Probes for the DM-1
060019
Features: - Stainless steel sensors. - Probe: 1/4". - Cable: 24,5". - Connector: 8-pin. - Thermometer pins: Yes. - Each sensor of the pair has a blue or red wrap and labeled "IN" or "OUT". - Pressure Rating: 16bar @ +23°C.
Dual TDS Sensor Probes for the DM-2
Dual TDS Sensor Probes for the DM-2
060021
Features: - Stainless steel sensors. - Probe: 1/4". - Cable: 45" (114,3 cm.). - Connector: dual 4+4-pin. - Thermometer pins: Yes. - Each sensor of the pair has a blue or red wrap and labeled "IN" or "OUT". - Pressure Rating: 16bar @ +23°C.
Electrolysis system for reverse osmosis test
Electrolysis system for reverse osmosis test
060058
The produced electrolysis process, as well as its viewing, increases intensity and reaction rate depending on the quantity of dissolved salts, among other factors. Water increases its electricity proportionally to the quantity of dissolved salts it contains. Contents of the briefcase: * Electrolysis precipitator * 2 aluminium electrodes * 2 iron electrodes * Transformer *
PM-2 external In-Line TDS Purity Monitor 220V.,110V.
PM-2 external In-Line TDS Purity Monitor 220V.,110V.
060065
An ideal monitor/alert for water coolers and other enclosed water purification systems. Alerts a user when the filtration system requires service. FEATURES * External single line internal TDS monitor that is ideal for most water purification systems. * Includes a light and optional alarm that alerts the user service is required when the TDS level reaches the pre-programmed set-point. * User-defined set points (any even number between 2 and 200). SPECIFICATIONS * Range: 0-200 ppm (mg/L) * Accuracy: +
104 products found - 4 pages
|<<<4
>> >|
Customers Login
e-mail
password

Air Ozone Generators Health Sterilization Deodorization Purify Air Oxygen Increasing Low Energy Consumption

www.sinergroup.it Everpure Filters