This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

Ionicore CGAC coconut granular activated carbon in line filter Chlorine reduction acid washed Water Purifiers water cooler Reverse Osmosis

Inline water filters and reverse osmosis postfilters

When replacing an inline water filter, check the flow direction, filter medium and connection type. For reverse osmosis postfilters, also compare the cartridge length and diameter.

In the catalogue
Dual sed+carb In line filters · Sediment In line filters · Activated carbon In line filters

order
other filters

Sediment in line filter 1/4" FPT 2"x10" - 5 micron (25)
Sediment in line filter 1/4" FPT 2"x10" - 5 micron (25)
07001001
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter. Technical Features: Max. Flow: 2,8lpm/0,75gpm * Max. Pressure: 8bar * Max. Temperature: 38°C./100°F.
Sediment in line filter 1/4", 3/8" FPT 2,5"x12" - 5, 10 micron (25)
Sediment in line filter 1/4", 3/8" FPT 2,5"x12" - 5, 10 micron (25)
07001002
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter. Technical Features: Max. Flow: 2,8lpm/0,75gpm * Max. Pressure: 8bar * Max. Temperature: 38°C./100°F.
Green Filter Sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (25)
Green Filter Sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (25)
07001004
Sediment removal. Service life: 1 year - 3.000 gal. - 11.340 liters Maximum flow: 1 gpm - 3,78 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 35°F - 2°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Green Filter CS Sediment in line filter 3/8" OD stem 2,5"x10,5" - 5 micron (25)
Green Filter CS Sediment in line filter 3/8" OD stem 2,5"x10,5" - 5 micron (25)
07001005
Sediment removal. Service life: 1 year - 3.000 gal. - 11.340 liters Maximum flow: 1 gpm - 3,78 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 35°F - 2°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
T33 Sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (25)
T33 Sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (25)
07001006
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter. Technical Features: Max. Flow: 2,8lpm/0,75gpm * Max. Pressure: 8bar * Max. Temperature: 38°C./100°F.
Green Filter classic sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (20)
Green Filter classic sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (20)
07001007
Sediment removal. Service life: 1 year - 3.000 gal. - 11.340 liters Maximum flow: 1 gpm - 3,78 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 40°F - 4°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
CL10 PF5 Sediment in line filter 1/4" FPT 2"x10" - 5 micron (25)
CL10 PF5 Sediment in line filter 1/4" FPT 2"x10" - 5 micron (25)
07001008
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter. Technical Features: Max. Flow: 1,9lpm/0,5gpm * Max. Pressure: 8bar * Max. Temperature: 38°C./100°F. *
Green Filter sediment in line filter 1/4" J.G. 2"x10" - 5 micron (25)
Green Filter sediment in line filter 1/4" J.G. 2"x10" - 5 micron (25)
07001009
Sediment removal. In/out: 1/4" quick connection Starfit (John Guest type) Service life: 1 year - 2.000 gal. - 7.560 liters Maximum flow: 0,69 gpm - 2,61 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 40°F - 4°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Green Filter sediment in line filter 1/4" J.G. 2,5"x11" - 5 micron (25)
Green Filter sediment in line filter 1/4" J.G. 2,5"x11" - 5 micron (25)
07001010
Sediment removal. In/out: 1/4" quick connection Starfit (John Guest type) Service life: 1 year - 3.000 gal. - 11.340 liters Maximum flow: 1 gpm - 3,78 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 40°F - 4°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Omnipure CL10PF5 Sediment in line filter 1/4" FPT 2"x10" - 5 micron (25)
Omnipure CL10PF5 Sediment in line filter 1/4" FPT 2"x10" - 5 micron (25)
07001011
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter.
details
Service life:
max. 1 year
Flow rate:
0,5 gpm (1,9L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Omnipure K5505 Sediment in line filter 3/8" FPT 2,5"x10" - 5 micron (25)
Omnipure K5505 Sediment in line filter 3/8" FPT 2,5"x10" - 5 micron (25)
07001012
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter.
details
Service life:
max. 1 year
Flow rate:
0,5 gpm (1,9L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Omnipure K5605 Sediment in line filter 1/4" FPT 2,5"x12" - 5 micron (25)
Omnipure K5605 Sediment in line filter 1/4" FPT 2,5"x12" - 5 micron (25)
07001013
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter.
details
Service life:
max. 1 year
Flow rate:
0,5 gpm (1,9L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Omnipure K5686 antiscale GAC in line filter 1/4", 3/8" FPT 2,5"x12" (25)
Omnipure K5686 antiscale GAC in line filter 1/4", 3/8" FPT 2,5"x12" (25)
07001014
Reduction of odor, color, taste, ideal for vending distributors and ice makers. Designed in order to be located inside of machinery for applications in catering, in coffee makers, vending machines and reverse osmosis. * Improve taste of beverages. * Protect from clogging, corrosion and wear. * No electrical connection required. * Installation: horizontal or vertical. * The rapid filter is easy to install and replace without use of special tools. The anti-limescale inhibitor to base of polyphosph
details
Service life:
2.000 gallons (7.570L) max. 6 months
Flow rate:
1,0 gpm (3,8L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Omnipure K5633 GAC in line filter 1/4" FPT 2,5"x12" (25)
Omnipure K5633 GAC in line filter 1/4" FPT 2,5"x12" (25)
07001015
Reduction of odor, color, taste, chlorine, dirt, rust, suspended material not visible at naked eye, mold and algae. Reduction of oxidized iron, manganese and sulfides. Ideal for vending distributors and ice makers. Designed in order to be located inside of machinery. * Improve taste of beverages. * Protect from clogging, corrosion and wear. * No electrical connection required. * Installation horizontal or vertical. * The rapid filter is easy to install and replace without use of special tools. Th
details
Service life:
2.500 gallons (9.460L) max. 1 year
Flow rate:
0,5 gpm (1,9L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Omnipure K5630 Silver GAC in line filter 1/4" FPT 2,5"x12" (25)
Omnipure K5630 Silver GAC in line filter 1/4" FPT 2,5"x12" (25)
07001016
Reduction of odor, color, taste, chlorine, dirt, rust, suspended material not visible at naked eye, mold and algae. Reduction of oxidized iron, manganese and sulfides. Ideal for water coolers, pre or post osmosis. Designed in order to be located inside of machinery. * Improve taste of beverages. * Protect from clogging, corrosion and wear. * No electrical connection required. * Installation horizontal or vertical. * The rapid filter is easy to install and replace without use of special tools. The
details
Service life:
2.500 gallons (9.460L) max. 1 year
Flow rate:
0,5 gpm (1,9L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Omnipure K5530 Silver GAC in line filter 3/8" FPT 2,5"x10" (25)
Omnipure K5530 Silver GAC in line filter 3/8" FPT 2,5"x10" (25)
07001017
Reduction of odor, color, taste, chlorine, dirt, rust, suspended material not visible at naked eye, mold and algae. Reduction of oxidized iron, manganese and sulfides. Ideal for vending distributors and ice makers. Designed in order to be located inside of machinery. * Improve taste of beverages. * Protect from clogging, corrosion and wear. * No electrical connection required. * Installation horizontal or vertical. * The rapid filter is easy to install and replace without use of special tools. Th
details
Service life:
2.000 gallons (7.570L) max. 1 year
Flow rate:
0,5 gpm (1,9L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Omnipure K5533 GAC in line filter 3/8" FPT 2,5"x10" (25)
Omnipure K5533 GAC in line filter 3/8" FPT 2,5"x10" (25)
07001018
Reduction of odor, color, taste, chlorine, dirt, rust, suspended material not visible at naked eye, mold and algae. Ideal for vending distributors and ice makers. Designed in order to be located inside of machinery. * Improve taste of beverages. * Protect from clogging, corrosion and wear. * No electrical connection required. * Installation horizontal or vertical. * The rapid filter is easy to install and replace without use of special tools. The IN LINE cartridges do not require a filter head or
details
Service life:
2.000 gallons (7.570L) max. 1 year
Flow rate:
0,5 gpm (1,9L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Omnipure K2530 Silver GAC in line filter 1/4" Q.C. 2"x10" (25)
Omnipure K2530 Silver GAC in line filter 1/4" Q.C. 2"x10" (25)
07001019
Reduction of odor, color, taste, chlorine, dirt, rust, suspended material not visible at naked eye, mold and algae. Reduction of oxidized iron, manganese and sulfides. Ideal for vending distributors and ice makers. Designed in order to be located inside of machinery. * Improve taste of beverages. * Protect from clogging, corrosion and wear. * No electrical connection required. * Installation horizontal or vertical. * The rapid filter is easy to install and replace without use of special tools. Th
details
Service life:
1.500 gallons (5.670L) max. 1 year
Flow rate:
0,5 gpm (1,9L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Omnipure CL10RO T/33 GAC in line filter 1/4" NPT 2"x10" - 5 micron (25)
Omnipure CL10RO T/33 GAC in line filter 1/4" NPT 2"x10" - 5 micron (25)
07001020
Reduction of odor, color, taste, chlorine, dirt, rust, suspended material not visible at naked eye, mold and algae. Designed in order to be located inside of machinery. * Improve taste of beverages. * Protect from clogging, corrosion and wear. * No electrical connection required. * Installation horizontal or vertical. * The rapid filter is easy to install and replace without use of special tools. The IN LINE cartridges do not require a filter head or bayonet joints for their installation and may
details
Service life:
1.500 gallons (5.670L) max. 1 year
Flow rate:
0,5 gpm (1,9L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Omnipure K5586 antiscale GAC in line filter 3/8" FPT 2,5"x10" (25)
Omnipure K5586 antiscale GAC in line filter 3/8" FPT 2,5"x10" (25)
07001021
Reduction of odor, color, taste, ideal for vending distributors and ice makers. Designed in order to be located inside of machinery for applications in catering, in coffee makers, vending machines and reverse osmosis. * Improve taste of beverages. * Protect from clogging, corrosion and wear. * No electrical connection required. * Installation: horizontal or vertical. * The rapid filter is easy to install and replace without use of special tools. The anti-limescale inhibitor to base of polyphospha
details
Service life:
1.500 gallons (5.670L) max. 6 months
Flow rate:
0,5 gpm (1,9L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Ionicore IC-10SE Sediment in line filter 1/4" FPT 2"x10" - 5 micron (25)
Ionicore IC-10SE Sediment in line filter 1/4" FPT 2"x10" - 5 micron (25)
07001022
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter.
details
Service life:
6 months (max. 1 Year)
Flow rate:
0,75 gpm (2,8L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
Ionicore IC-11SE Sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (25)
Ionicore IC-11SE Sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (25)
07001023
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter.
details
Service life:
6 months (max. 1 Year)
Flow rate:
0,75 gpm (2,85L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Ionicore IC-10CGAC coconut granular activated carbon in line filter 1/4" NPT 2"x10" (25)
Ionicore IC-10CGAC coconut granular activated carbon in line filter 1/4" NPT 2"x10" (25)
07001024
Filter made of granular activated carbon deriving from coconut shell for an high level of absorption with high efficiency. Reduction of odor, color, taste, chlorine, dirt, rust, suspended material not visible at naked eye, mold and algae. Ideal for water coolers and post-osmosis. Designed in order to be located inside of machinery. * Improve taste of beverages. * Protect from clogging, corrosion and wear. * No electrical connection required. * Installation horizontal or vertical. * The rapid filter
details
Service life:
1.500 gallons (5.670L) max. 1 year
Flow rate:
0,5 gpm (1,9L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
Ionicore IC-11CGAC coconut granular activated carbon in line filter 1/4" NPT 2,5"x11" (25)
Ionicore IC-11CGAC coconut granular activated carbon in line filter 1/4" NPT 2,5"x11" (25)
07001025
Filter made of granular activated carbon deriving from coconut shell for an high level of absorption with high efficiency. Reduction of odor, color, taste, chlorine, dirt, rust, suspended material not visible at naked eye, mold and algae. Ideal for water coolers and post-osmosis. Designed in order to be located inside of machinery. * Improve taste of beverages. * Protect from clogging, corrosion and wear. * No electrical connection required. * Installation horizontal or vertical. * The rapid filter
details
Service life:
2.500 gallons (9.460L) max. 1 year
Flow rate:
1,05 gpm (4L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
Ionicore IC-11SCCB Silver coconut carbon block in line filter 1/4" NPT 2,5"x11" - 0.5, 5 micron (25)
Ionicore IC-11SCCB Silver coconut carbon block in line filter 1/4" NPT 2,5"x11" - 0.5, 5 micron (25)
07001027
Silver coconut carbon block in line filter deriving from coconut shell for an high level of absorption with high efficiency. Reduction of odor, color, taste, chlorine, dirt, rust, suspended material not visible at naked eye, mold and algae. Ideal for water coolers and post-osmosis. Designed in order to be located inside of machinery. * Improve taste of beverages. * Protect from clogging, corrosion and wear. * No electrical connection required. * Installation horizontal or vertical. * The rapid filt
details
Service life 0.5 micron:
1.057 gallons (4.000L) max. 1 year
Service life 5 micron:
1.005 gallons (3.800L) max. 1 year
Flow rate 0.5 micron:
0,52 gpm (2L/min)
Flow rate 5 micron:
1,05 gpm (4L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (25)
Sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (25)
07001028
This in-line water filter is designed to reduce sediment and suspended particles down to 5 microns, making it an excellent prefiltration solution for water treatment systems, reverse osmosis units, drinking w
details
Service life:
6 months (max. 1 Year)
Flow rate:
0,75 gpm (2,85L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Sediment in line filter 1/4" FPT 2"x10" - 5 micron (25)
Sediment in line filter 1/4" FPT 2"x10" - 5 micron (25)
07001029
Applications: Reverse Osmosis(RO) Pre-Filtration. To reduce larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective
details
Service life:
6 months (max. 1 Year)
Flow rate:
0,75 gpm (2,85L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
No branded Silver coconut carbon block in line filter 1/4" NPT 2,5"x11" - 0.5, 5 micron (25)
No branded Silver coconut carbon block in line filter 1/4" NPT 2,5"x11" - 0.5, 5 micron (25)
07001030
Customizable Private-Label Filter – Build Your Own Brand Offer your customers a water filter featuring your own brand name and design. This line of neutral, no-label filters has been created specifically for companies that want to personalize the product with their logo and custom graphics. A filter carrying your brand conveys professionalism, authority, and prestige — strengthening customer loyalty and increasing your brand’s perceived value. Stand out from competitors by offering a certified, high-qua
details
Service life 0.5 micron:
1.057 gallons (4.000L) max. 1 year
Service life 5 micron:
1.005 gallons (3.800L) max. 1 year
Flow rate 0.5 micron:
0,52 gpm (2L/min)
Flow rate 5 micron:
1,05 gpm (4L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
No branded coconut granular activated carbon in line filter 1/4" NPT 2,5"x11" (25)
No branded coconut granular activated carbon in line filter 1/4" NPT 2,5"x11" (25)
07001031
Customizable Private-Label Filter, Build Your Own Brand Offer your customers a water filter featuring your own brand name and design. This line of neutral, no-label filters has been created specifically for companies that want to personalize the product with their logo and custom graphics. A filter carrying your brand conveys professionalism, authority, and prestige — strengthening customer loyalty and increasing your brand’s perceived value. Stand out from competitors by offering a certified, high-qual
details
Service life:
2.500 gallons (9.460L) max. 1 year
Flow rate:
1,05 gpm (4L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
No branded coconut granular activated carbon in line filter 1/4" NPT 2"x10" (25)
No branded coconut granular activated carbon in line filter 1/4" NPT 2"x10" (25)
07001032
Customizable Private-Label Filter, Build Your Own Brand Offer your customers a water filter featuring your own brand name and design. This line of neutral, no-label filters has been created specifically for companies that want to personalize the product with their logo and custom graphics. A filter carrying your brand conveys professionalism, authority, and prestige — strengthening customer loyalty and increasing your brand’s perceived value. Stand out from competitors by offering a certified, high-qual
details
Service life:
1.500 gallons (5.670L) max. 1 year
Flow rate:
0,5 gpm (1,9L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
90 products found - 3 pages
|< <<
1
23
>> >|

www.sinergroup.it Everpure Filters