Soda Breezy S spare parts

Soda Breezy S spare parts

The Soda Breezy S soda maker, turns tap water into sparkling water in just a few seconds, with no electricity required. With the Soda Breezy 3, you can create dozens of different fizzy drinks by mixing the carbonated water with flavor concentrates of your choice, such as Cola or Orange.

Instructions:

1 * Fill the bottle with cold water if possible, up to the indicated level for optimal carbonation, and screw the bottle to the device by turning it counterclockwise. IMPORTANT: Do not fill the bottle beyond the limit and never inject Co2 if the bottle is empty or half-full, as excessive pressure could cause damage.
2 * Press the Co2 release button for 3 to 4 seconds (depending on the desired level of carbonation) and water will instantly become sparkling.
The hissing sound you hear at the end of the Co2 injection is normal, and it indicates the carbonation is complete; it releases the excess Co2 for safety.
3 * Release system pressure by gently pulling the bottle outward until you hear the venting sound. Then unscrew the bottle clockwise.
4 * To make your fizzy beverage, add your preferred flavor concentrate, close the bottle with its dedicated cap, and store it in the fridge.

System components:
1x Soda Breezy S
1x Transparent drip-proof cover for the Co2 injector. (Keeps injector hygienic and free from dust when mounting bottle.)
1x Co2 loaded Cylinder 450gr. - 60/70lt. Sparkling water.
1x PET bottle 1lt. reusable with cap and gasket.
1x Replacement Co2 cylinder gasket.
1x Manual
Dimensions: (A) 43 x (P) 21 x (L) 14,5 cm.

The Soda Breezy S Co2 cylinders with ACME connection can be used with other soda makers available on the market, including:
Imetec Bubbles, Beghelli La Macchina dell’Acqua, Wassermaxx, Wassermate, Sodastream, Sodaclub, Happy Frizz, Smart Filtra, Frizza.
(All trademarks mentioned are registered by their respective owners.)