RO600 V2 direct flow reverse osmosis 90lt./h. with 1-way faucet, without TDS regulator

RO600 V2 direct flow reverse osmosis 90lt./h. with 1-way faucet, without TDS regulator

RO600 V2 is a RO system of the latest generation, designed to offer the highest performances and adapting to the features and the spaces of every kitchen. This device is able to provide up to 1,8 liters per minutes of osmotic water thanks to the 600GPD membrane equipped.

Filtration
Filter 1: Sediment + Carbon Block
Filter 2: RO Membrane 600 GPD

Features:
- Voltage/rated frequency: 100-240V. - 50/60 Hz 24 VCC 2,5A
- Rated power: 96W.
- Inlet pressure: 0,2-0,4 MPa (2-4 bar)
- Flow rate: 1,8 ltr./min.
- Working temperature: 5-38 °C
- Inlet TDS: 1500ppm
- Maximum recommended hardness: 15°F
- Dimensions (mm.): 356x125x328

Connections:
- H2O IN: 3/8"
- Faucet: 1/4"
- Drain: 1/4"

After the reverse osmosis process, it is recommended to install the Ionicore inline filter as final stage. This filter naturally reintroduces calcium and magnesium and, thanks to the coconut-based granular activated carbon (GAC) and its pH regulation function, it stabilizes the water, making it more balanced and pleasant to drink.
1x 07004004 Ionicore remineralizer PH adjustment coconut in line filter (GAC) 1/4" FPT 2"x10"

The reverse osmosis is not a device that makes water drinkable(non-drinkable water into drinkable water) and it work only if it's installed on water compliant with the law, municipal potable water or well water if previously made drinkable with adequate and effective systems, preventively studied and personalized for that kind of water.
Do not use the system where the water is microbiologically dangerous or of unknown quality without adequate disinfection before and after the system. All systems must be preserved according to the producer instructions.
The pollutant parts removed or reduced by this system are not necessarily in your water.