All of our devices can be entirely customized with your logo/brand, both in terms of components and aesthetics, with an additional front panel based on customer requests.

Direct flow reverse osmosis system 130 l/h, 3-way, with high production capacity, capable of instantly dispensing ambient, chilled and sparkling chilled water.
The unit is equipped with an ice-bank cooling system and a manual thermostat for regulating the dispensed water temperature, ensuring high performance even under intensive use conditions.
The system performance is entrusted to a 400 l/h rotary vane pump powered by a 180 W motor, designed to ensure service continuity and long-term reliability.
Operational management is handled by an electronic control board that supervises system operation, optimizes performance, monitors any anomalies and supports scheduled maintenance through dedicated notifications for filter status monitoring.
To ensure maximum efficiency of the RO membrane, the system integrates an auto-flushing solenoid valve that automatically performs membrane washing cycles, helping to preserve its performance and service life.
From a safety standpoint, the equipment is fitted with a flood protection sensor that, in the event of an accidental leak, immediately shuts off the water supply to the entire system.
The device is also equipped with a TDS regulator that allows customization of the mineral salt content in the treated water, adapting the taste of the water to the user's preferences or any applicable local regulatory requirements.
Designed for under-sink installation or inside adjacent cabinets, the system is engineered to operate efficiently even in confined spaces, without the overheating issues typical of other refrigeration technologies.
Reverse osmosis is one of the most widespread and reliable water treatment technologies worldwide. The process effectively reduces contaminants, impurities and unwanted substances present in water without the use of chemicals, ensuring high quality standards, low operating costs and ease of management.
The produced water is particularly suitable for food and domestic consumption thanks to the high level of protection provided against the main contaminants present in water networks and groundwater sources. The entire system is manufactured using high-quality components, selected to ensure reliability, durability and consistent performance over time.
This product is normally manufactured for professional use; in this case it has been designed and configured for domestic use.
Product is made in Italy, D.M.25/2012, D.M.174/2004 certified by Italian Ministry.

Specifications:
* 1x 07001023-01 Ionicore IC-11SE Sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (25)
* 1x 07001027-02 Ionicore IC-11SCCB Silver coconut carbon block in line filter 1/4" NPT 2,5"x11" - 5 micron (25)
* 2x Membranes Keypra 2012 - 400 GPD
* Membrane style: Dry
* Maximum daily flow rate: 800 GPD (3,120 ltr.)
* Motor: Air cooled
* Pump: Rotary vane pump 400lt/h
* Maximum inlet salinity: 2.000ppm.
* TDS regulator in accordance with your taste (mineral salts outgoing)
* Working pressure: 0,2~0,4MPa (1~2 bar)
* Working temperature: 3°C.-14°C.
* Power supply: 220-240V-50/60Hz CE
* Average NaCL rejection: >95%

Connections:
* Power supply: 220-230V / 50Hz - Italian 3-plug L type Black
* Water inlet: DMfit 3/8" quick fit straight adaptor.
* Co2 inlet: DMfit 1/4" quick fit Bulkhead.
* Water outlet: DMfit 5/16" quick fit Bulkhead.

Accessories included in the system cod. 050073-01 ready to install:
- Installation kit.
- Tubes.
- 10003043-CR 3043 3-way faucet 1/4" Chrome
- 01012028-01 Carbon-Tech riduttore di pressione Co2 per bombole monouso 0,5-5 BAR - M11x1
- D005-AMCBT0402 Straight adaptor OD Tube - BSPT thread 1/4" X 1/8".
- 19019002 Disposable CO2 cylinder E290 for water coolers 0,600gr.

Depending on the pressure reducer, it's possible to mount disposable or rechargeable Co2 cylinder:
* 19019002 Disposable Co2 steel cylinder 0,600gr.
* 19019001-08 Steel Co2 cylinder rechargeable 2Kg. with residual valve.
* 19019001-03 Steel Co2 cylinder rechargeable 4Kg. with residual valve.

The reverse osmosis is not a device that makes water drinkable (non-drinkable water into drinkable water) and it works only if it's installed on water complies with the law, municipal potable water or well water if previously made drinkable with adequate and effective systems, preventively studied and personalized for that kind of water. Do not use the system where the water is microbiologically dangerous or of unknown quality without adequate disinfection before and after the system. All systems must be preserved according to the producer instructions. The pollutant parts removed or reduced by this system are not necessarily in your water. In case of potable inlet water of bad quality, it's possible to close all the outgoing mineral salts regulator (TDS) and to mount, as the last stage, a remineralizer filter that stabilizes the Ph.

* 1x 07004004 Ionicore remineralizer PH adjustment coconut in line filter (GAC) 1/4" FPT 2"x10".

Replace filters when their rated capacity has been reached, or when the flow rate becomes too low; every 6 months, but at least once per year.
Replace the membranes when the Total Dissolved Solids (TDS) level is no longer reduced, or when the flow rate becomes too low; however, at least every 24 months.