This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

CS series Water Softener Electronic Valve Regeneration Metered Time saving cleaning protection health pureness beauty  liters resin

DMFIT tubing LLDPE
DMfit LLDPE Tubing

DMfit tubing is produced from an advanced grade of low density polyethylene. Its greatest advantage is superior environmental stress cracking resistance (ESCR), greatly exceeding that of ordinary polyethylene tubing as measured by ASTM D-1693 (IGEPAL) tests. Environmental stresses that can shorten the service life of tubing include chemical exposure, aging connections with barb-type fittings, or high vibration loads with connections to compression fittings. Our tubing is compliant to ANSI/NSF-51, 61, WRAS and FDA requirements for food contact applications. Our tubing is available in multiple coding colors, and offers the user :
- Dimensional stability.
- Uniformity and long-term strength.
- Higher burst pressure.
- Greater tensile strength.
- Wide range of available colors.
- Suitable for use with DMfit products and those of other manufacturers.

Working pressure and temperature
5/32" 3/16" 1/4" 5/16" 3/8" 1/2"
4mm 5mm 6mm 8mm 10mm 12mm
Pressure 230psi 170psi
Tube tolerances -0,1mm / +0,1mm
Temperature Air -20°C (-4°F) - 65°C (150°F) Liquid

* Pressure values are based on PE tube used at room temperature.
* Consult our representative when using at continuous elevated temperature and pressure.

>> Download DMfit fittings catalogue <<

DMfit-tubi.jpgHome
 » 
Raccordi a innesto rapido DM fit
 » 
DM fit Tubing
order
other filters

Customers Login
e-mail
password

Faucets Revers Osmosis Water Coolers Microfiltration

www.sinergroup.it Everpure Filters