This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

RO50 RO75 reverse osmosis with tank TDS regulator Membrane 50gpd Membrane 75gpd Pump System UV water purifier

order
other filters

RT-770 In-Line TDS Tester
RT-770 In-Line TDS Tester
060014
The RT-770 is an in-line and low cost testing device to monitor the quality of pure water which is generated by Reverse Osmosis water filters. It measures the conductivity of water and convert it to be TDS reading. The measured TDS reading is compared to the pre-setting TDS value. The RT-770 turns on RED light if the measured TDS reading is over the pre-setting TDS value. If it’s under the pre-setting TDS value, the RT-770 turns on Green light. Alert options available: 40ppm - 80ppm - 100ppm - 150ppm.
RT-790, In-Line Programmable Automatic TDS Tester
RT-790, In-Line Programmable Automatic TDS Tester
060015
The RT-790 is an in-line and low cost testing device to monitor the quality of pure water which is generated by reverse osmosis water filters. It measures the conductivity of water and convert it to be TDS reading. The measured TDS reading is compared to the pre-setting TDS value. The RT-790 turns on RED light if the measured TDS reading is over the pre-setting TDS value. If it’s under the pre-setting TDS value, the RT-790 turns on Green light. Feature: * Automatic testing or manual testing * Internal
Quick Check TDS/Conductivity Monitor
Quick Check TDS/Conductivity Monitor
060016
Press the "Push-to-Check" button for an instant water quality check. Features - With the push of a button, the unit displays a green or red light, indicating good water quality or service required, respectively. - Tests for TDS or conductivity
Quick Check TDS LCD Monitor
Quick Check TDS LCD Monitor
060017
Ideal for any water filtration system, including reverse osmosis systems, coolers and much more. Features - Displays TDS level of a single water line. - Highly efficient and accurate due to its advanced microprocessor technology. - Auto-Off fu
In-Line Dual TDS in-out meter monitor for water
In-Line Dual TDS in-out meter monitor for water
060126
Measure the tap water coming in vs. the purified water going out of your water filtration system at any time. Specification: - Range: 0-1999 mg/lt. (ppm); - Resolution: 1mg/lt. (ppm); - Accuracy: ±2% F.S; - Power supply: 4x1,5 V. (AG13); - Automatic temperature compensation: 0-50 °C - Dimensio
Dual TDS Sensor Probes for the DM-1
Dual TDS Sensor Probes for the DM-1
060019
Features: - Stainless steel sensors. - Probe: 1/4". - Cable: 24,5". - Connector: 8-pin. - Thermometer pins: Yes. - Each sensor of the pair has a blue or red wrap and labeled "IN" or "OUT". - Pressure Rating: 16bar @ +23°C.
DM-2 Commercial/residential in-Line Dual TDS Monitor
DM-2 Commercial/residential in-Line Dual TDS Monitor
060020
Install on industrial systems such as car washes, window washing, manufacturing, and food processing. Features: - Highly efficient and accurate due to its advanced microprocessor technology. - Displays TDS levels of the Feed Water and Product W
Dual TDS Sensor Probes for the DM-2
Dual TDS Sensor Probes for the DM-2
060021
Features: - Stainless steel sensors. - Probe: 1/4". - Cable: 45" (114,3 cm.). - Connector: dual 4+4-pin. - Thermometer pins: Yes. - Each sensor of the pair has a blue or red wrap and labeled "IN" or "OUT". - Pressure Rating: 16bar @ +23°C.
Electrolysis system for reverse osmosis test
Electrolysis system for reverse osmosis test
060058
The produced electrolysis process, as well as its viewing, increases intensity and reaction rate depending on the quantity of dissolved salts, among other factors. Water increases its electricity proportionally to the quantity of dissolved salts it contains. Contents of the briefcase: * Electrolysis precipitator * 2 aluminium electrodes * 2 iron electrodes * Transformer *
PM-2 external In-Line TDS Purity Monitor 220V.,110V.
PM-2 external In-Line TDS Purity Monitor 220V.,110V.
060065
An ideal monitor/alert for water coolers and other enclosed water purification systems. Alerts a user when the filtration system requires service. FEATURES * External single line internal TDS monitor that is ideal for most water purification systems. * Includes a light and optional alarm that alerts the user service is required when the TDS level reaches the pre-programmed set-point. * User-defined set points (any even number between 2 and 200). SPECIFICATIONS * Range: 0-200 ppm (mg/L) * Accuracy: +

www.sinergroup.it Everpure Filters