AMI RO membrane TFC 1812 - 150GPD (25)

AMI RO membrane TFC 1812 - 150GPD (25)

AMI Membrane home membrane elements, are among the finest in the industry. With hundreds of thousands of membranes in operation world-wide, we offer these in a large range of both residential and commercial sizes AMI Membranes are Made in the USA in our ISO 9001:2008 Certified Facilities. For the past 30 years AMI Membrane elements have earned the reputation of consistent quality.

Recommended Operating Conditions (50, 75, 100, 150GPD)
- Maximum operating pressure: 125psi (8,61bar)
- Maximum feed flow rate: 2gpm (7,57 ltr./min.)
- Maximum operating temperature: 113°F (45°C)
- Maximum feed water turbidity: 1 NTU
- Maximum feed water silt density index (15 min): 5min.
- Chlorine tolerance: <0.1 ppm
- Feed water pH range, Continuous Operation: 2-11
- Feed water pH range, Short-Term Cleaning (30 minutes): 1-12 min.
- Minimum brine flow to permeate flow ratio: 4:1
- Dimensions 50, 75, 100GPD: L-11,75"(29,85cm) I-10"(25,4cm) D-1,75"(4,57cm)
- Dimensions 150GPD: L-11,75"(29,85cm) I-10"(25,4cm) D-1,95"(5cm)
Note: Salt rejection and performance specifications shown are from internal test data.
Performance specifications based on 500ppm tap water, 65psi (3,44bar) applied pressure, 77°F (25°C) feed water temperature, feed water pH 7-8 and 15% recovery.
Element permeate flow may vary ± 20%.

The 150GPD membranes are designed for a tight fit in most standard housings. If the membrane fits loosely, you may need to wrap a few layers of tape near one end to make a tight fit.

Recommended Operating Conditions (300GPD)
- Maximum operating pressure: 300 psi (20,68bar)
- Maximum feed flow rate: 6 gpm (22,71 ltr./min.)
- Maximum operating temperature: 113°F (45°C)
- Maximum feed water turbidity: 1 NTU
- Maximum feed water silt density index (15 min): 4min.
- Chlorine tolerance: <0.1 ppm
- Feed water pH range, Continuous Operation: 2-11
- Feed water pH range, Short-Term Cleaning (30 minutes): 1-12 min.
- Single Element recovery: 15%
- Dimensions 300GPD: A-11,75"(29,85cm) B-10,25"(26,03cm) C-3"(7,61cm) E-3,2"(8,12cm)
Note: Performance specifications based on, Tap Water, 77°F (25°C) feed water temperature, pH 8 and 10% recovery. Element permeate flow may vary ± 15%.