This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

Water Softener Valve AUTOTROL 255/760 Regeneration Metered Time

order
other filters

Replacement Co2 pressure gauge OD 40 0-10,0 Bar OT 1/8" back connection
Replacement Co2 pressure gauge OD 40 0-10,0 Bar OT 1/8" back connection
01012018
For cod. 01012004-01/-02, 01012008, 01012006-02, 01012010-01.
Replacement Co2 pressure gauge OD 0-250 Bar BSP 1/8" (high pressure) for cod. 01012007
Replacement Co2 pressure gauge OD 0-250 Bar BSP 1/8" (high pressure) for cod. 01012007
01012019
The pressure gauges can be mounted in all the pressure reducers with predisposition, following the correct mounting. To assemble the high-pressure pressure gauge in the HP marked port. The opposit port is dedicated at LP low-pressure pressure gauge mounting. Don't assemble the LP low-pressure pressure gauge in the HP high-pressure pressure gauge dedicated port.
Replacement Co2 pressure gauge OD 40 0-10,0 Bar BSP 1/8" (low pressure) for cod. 01012007
Replacement Co2 pressure gauge OD 40 0-10,0 Bar BSP 1/8" (low pressure) for cod. 01012007
01012020
The pressure gauges can be mounted in all the pressure reducers with predisposition, following the correct mounting. To assemble the high-pressure pressure gauge in the HP marked port. The opposit port is dedicated at LP low-pressure pressure gauge mounting. Don't assemble the LP low-pressure pressure gauge in the HP high-pressure pressure gauge dedicated port.
CO2 high pressure extension hose from 1050 to 2000mm.
CO2 high pressure extension hose from 1050 to 2000mm.
01012021
01012021-01 Total length: 1050mm. Work pressure: 0-200Bar. Connections: Female Thread: W21.8 CH.30 Male Thread: W21.7 CH.24 Material: CW614N Tube OD: 1/4" Length: 975mm. Material: Thermoplastic - KEVLAR 01012021-02 Total length: 1500mm. W
CO2 high pressure extension hose manual from 1050 to 2000mm.
CO2 high pressure extension hose manual from 1050 to 2000mm.
01012022
01012022-01 Total length: 1050mm. Work pressure: 0-200Bar. Connections: Female Thread: W21.8 CH.24 Male Thread: W21.7 CH.24 Material: CW614N Tube OD: 1/4" Length: 932mm. Material: Thermoplastic - KEVLAR 01012022-02 Total length: 1500mm. W
MASRIV 4/90 earther rivet Cu/steel 4 terminals
MASRIV 4/90 earther rivet Cu/steel 4 terminals
20040042
Blind rivet, copper bushing, copper-plated steel nail, brass faston.
Washer OD 4x12 Stainless A2 (1.000)
Washer OD 4x12 Stainless A2 (1.000)
20040040
Flat washers without chamber, with outside diameter. Features: Material: Stainless steel AISI304 Color: Natural Reference standard: DIN9021, UNI6593, ISO7093 Dimensions: A= 12mm. B= 4mm. C= 1mm.
Water Block valve with and w/o instant reset
Water Block valve with and w/o instant reset
01013002
The valve Water Block is a Security instrument anti-flooding used to control the passage of a volume of water between 5 and 50 liters. Its fuction is to measurement of the passage of the water and...
AS-413, AS-414 Water Leak Blocker with Auto Shut Off Valve
AS-413, AS-414 Water Leak Blocker with Auto Shut Off Valve
01013003
Features: * Auto shut off water when water leak is detected * 9V alkaline battery operated * Auto shut off when low battery power * Easy installation * Protection for water filter, water softener Specification: * Operating voltage: 9V DC * Supply
Mechanical leaking sensor 1/4"~3/8"
Mechanical leaking sensor 1/4"~3/8"
01013004
This exclusive leak protector not merely detects leaks, but it also shuts off the flow that comes from a drinking water system if there is a leak. This device is designed to eliminate any possible damage to houses and business property. Functioning: The device is patented and its functioning is incredibly simple. When a leak occurs, the adsorbent applicator towel-coin will expands to close the valve and shut off the incoming water supply. Two tablets are included with each Leak Protector, and rep
Drain Clamp 1/4" compression fit
Drain Clamp 1/4" compression fit
01003002
Clamp drain valve 1/4" black compression nut, for connecting reverse osmosis systems drain pipe to the sink siphon in a solid and safe way. Application: Household reverse osmosis drain line Connection type: Jaco 1/4" Operating temperature (max/min): 40-2°C Diameter siphon tube (max): 40 mm Dimensions: Width: 74mm. - Height: 32mm. - Length: 85mm.
Cylindrical head tapping screw stainless steel A2 OD 3,9x13
Cylindrical head tapping screw stainless steel A2 OD 3,9x13
20040038
Cylindrical head tapping screw metric thread. Features: Diameter: 3,9 Length (mm.): 13 D (mm.): 7,5
Flat head screw Ph UNI 7688 / DIN 965 SS A2 M4x10 (500)
Flat head screw Ph UNI 7688 / DIN 965 SS A2 M4x10 (500)
20040065
Phillips cross flat head screw metric thread. Material:Stainless steel A2 Features: Diameter: M4 Length (mm.): 10 H (mm.): 2,2 D (mm.): 7,5
Cross head screw Ph UNI 7687/DIN 7985 SS A2 M4x10 (500/1000)
Cross head screw Ph UNI 7687/DIN 7985 SS A2 M4x10 (500/1000)
20040036
Cross pan head screw metric thread. Material:Stainless steel AISI304 Features: Diameter: M4 Length (mm.): 10 H (mm.): 3,1 D (mm.): 8
M4x20 countersunk head screw stainless steel A2 (1000)
M4x20 countersunk head screw stainless steel A2 (1000)
20040066
Phillips cross flat head screw metric thread. Material:Stainless steel AISI304 Features: Diameter: M4 Length (mm.): 20 H (mm.): 2,2 D (mm.): 7,5
Cross head screw Ph UNI 7687/DIN 7985 SS A2 M4x20 (500/1000)
Cross head screw Ph UNI 7687/DIN 7985 SS A2 M4x20 (500/1000)
20040037
Cross pan head screw metric thread. Material:Stainless steel AISI304 Features: Diameter: M4 Length (mm.): 20 H (mm.): 3,1 D (mm.): 8
M5x10 flat head screw stainless steel A2 (500)
M5x10 flat head screw stainless steel A2 (500)
20040064
Phillips cross flat head screw metric thread. Material:Stainless steel AISI304 Features: Diameter: M4 Length (mm.): 10 H (mm.): 2,5 D (mm.): 9,2
92 products found - 4 pages
|<<<3
4
>> >|
Customers Login
e-mail
password

UVC Water Systems Ultrarays Water Purifiers RO Systems Water Filter Pools

www.sinergroup.it Everpure Filters