Guarnizioni: EPDM 70 PEROX FDA

Guarnizioni: EPDM 70 PEROX FDA

TDS mixing valve 1/4" used in the RO Systems for the mineral salts reintegration. Turn the knob to regulate the mineral salts quantity inside the water by increasing or reducing the flow of untreated water that will be mix with the osmotic water.

Galvanic NSF61 food coating Standard UNI EN ISO 2503 CO2 and N2 Pressure Regulators are Tested singly Internal high pressure valve in INOX AISI 300 Teflon gasket

Galvanic NSF61 food coating Standard UNI EN ISO 2503 CO2 and N2 Pressure Regulators are Tested singly Internal high pressure valve in INOX AISI 300 Teflon gasket.

* Low pressure gauge 4.5 bar rear connection * Handle for easy disassembly * 304 AISI Stainless Steel * IN: ACME thread * OUT: 1/8" NPTF F. thread

SR-02 has everything you need for your safety and always to have under control the operating parameters of your installation of CO2 and N2. * Material Aluminum HR * Treatment Anodized * Input Pressure From 1 to 160 bar * Output Pressure Adjustable * Gauges output pressure * Safety Overpressure (Pop-Off) * In Female thread: 11x1 (disposable cylinder) or 21.8X1/14 "(rechargeable cylinder) via adapter extension. * Out female thread: 1/8" * Flow Rate 15 l/min.

From M11x1 to W21.8x1/14" With this adapter, it is possibile to use the pressure reducer with rechargeable cylinders.

SR-02 has everything you need for your safety and always to have under control the operating parameters of your installation of CO2 and N2. * Material Aluminum HR * Treatment Anodized * Input Pressure From 1 to 160 bar * Output Pressure Adjustable * Gauges output pressure * Safety Overpressure (Pop-Off) * In Female thread: 11x1 (disposable cylinder) or 21.8X1/14 "(rechargeable cylinder) via adapter extension. * Out female thread: 1/8" * Flow Rate 15 l/min.

SR-02 ADVanced has everything you need for your safety and always to have under control the operating parameters of your installation of CO2 and N2. It gives you protection against overpressure and pressure fluctuations in output. It makes you check the filling of the cylinder. Lets you precisely adjust the pressure of use. The two pressure gauges indicate the charge of the cylinder and the outlet pressure of CO2. Features: - Material: Aluminum HR - Treatment: Anodized - Input Pressure: From 1

Pressure reducer low-profile with connection ACME. This regulator requires an height only 2 cm (0.78 inch) allowing the use of ACME cylinders in very small spaces. Mounting and dismounting from the cylinder will not require tools. Features: - Material: Aluminum HR - Treatment: Anodized - Input Pressure: From 1 to 160 bar - Output Pressure: 0-5,5 bar [Adjustable] - Gauges: output pressure - Safety: Overpressure (Pop-Off) - IN female thread: ACME - OUT female thread: 1/8" - Flow Rate:

With this adapter, it is possibile to use the pressure reducer from rechargeable cylinders to disposable cylinders.

SR-02 has everything you need for your safety and always to have under control the operating parameters of your installation of CO2 and N2. * Material Aluminum HR * Treatment Anodized * Input Pressure From 1 to 160 bar * Output Pressure Adjustable * Gauges output pressure * Safety Overpressure (Pop-Off) * In Female thread: 11x1 (disposable cylinder) or 21.8X1/14 "(rechargeable cylinder) via adapter extension. * Out female thread: 1/8" * Flow Rate 15 l/min.

The SR-Micro, thanks to a new system presetting "Adaptive comparison" you can forget the classical gauge. Indeed, the pressure (controlled) is indicated with precision (2.5% KI) on the reducer. This has enabled a compact reducer and incredible reliability, SR-Micro is all made of anodized aluminum alloy, stainless steel and, on request, holes forwall bracket (M5). Material: Aluminum HR Input Pressure From 10 to 120 bar Output Pressure: Adjustable (0 - 5,5bar) Safety: Overpressure (Pop-Off) Connecti

The SR-Micro, thanks to a new system presetting "Adaptive comparison" you can forget the classical gauge. Indeed, the pressure (controlled) is indicated with precision (2.5% KI) on the reducer. This has enabled a compact reducer and incredible reliability, SR-Micro is all made of anodized aluminum alloy, stainless steel and, on request, holes forwall bracket (M5). Material: Aluminum HR Input Pressure From 10 to 120 bar Output Pressure: Adjustable (0 - 5,5bar) Safety: Overpressure (Pop-Off) Connecti