This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

Ionicore BIG standard Ionicore pleated polyester cartridges water filter filtration Water Purifiers

order
other filters

Dual sed+carb In line filters 1/4" FPT, 1/4" Quick fit 2,5"x11", 2,5x11" - 15 micron
Dual sed+carb In line filters 1/4" FPT, 1/4" Quick fit 2,5"x11", 2,5x11" - 15 micron
07002501
Sediment - granular carbon GAC dual in-line filters. Sediment, chlorine, taste, odor and turbidity removal. Service life: 1 year - 1.500 gal. - 5.670 liters Maximum flow: 0,75 gpm - 2,84 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 40°F - 4°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Ionicore IC-10SE Sediment in line filter 1/4" FPT 2"x10" - 5 micron (25)
Ionicore IC-10SE Sediment in line filter 1/4" FPT 2"x10" - 5 micron (25)
07001022
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter.
details
Service life:
6 months (max. 1 Year)
Flow rate:
0,75 gpm (2,8L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
Ionicore IC-11SE Sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (25)
Ionicore IC-11SE Sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (25)
07001023
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter.
details
Service life:
6 months (max. 1 Year)
Flow rate:
0,75 gpm (2,85L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Sediment in line filter 5 micron 1/4" FPT 2"x10" - 5 micron (25)
Sediment in line filter 5 micron 1/4" FPT 2"x10" - 5 micron (25)
07001001
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter. Technical Features: Max. Flow: 2,8lpm/0,75gpm * Max. Pressure: 8bar * Max. Temperature: 38°C./100°F.
Sediment in line filter 1/4", 3/8" FPT 2,5"x12" - 5, 10 micron (25)
Sediment in line filter 1/4", 3/8" FPT 2,5"x12" - 5, 10 micron (25)
07001002
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter. Technical Features: Max. Flow: 2,8lpm/0,75gpm * Max. Pressure: 8bar * Max. Temperature: 38°C./100°F.
CL10 PF5 Sediment in line filter 1/4" FPT 2"x10" - 5 micron (25)
CL10 PF5 Sediment in line filter 1/4" FPT 2"x10" - 5 micron (25)
07001008
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter. Technical Features: Max. Flow: 1,9lpm/0,5gpm * Max. Pressure: 8bar * Max. Temperature: 38°C./100°F. *
Green Filter Sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (25)
Green Filter Sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (25)
07001004
Sediment removal. Service life: 1 year - 3.000 gal. - 11.340 liters Maximum flow: 1 gpm - 3,78 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 35°F - 2°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Green Filter CS Sediment in line filter 3/8" OD stem 2,5"x10,5" - 5 micron (25)
Green Filter CS Sediment in line filter 3/8" OD stem 2,5"x10,5" - 5 micron (25)
07001005
Sediment removal. Service life: 1 year - 3.000 gal. - 11.340 liters Maximum flow: 1 gpm - 3,78 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 35°F - 2°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
T33 Sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (25)
T33 Sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (25)
07001006
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter. Technical Features: Max. Flow: 2,8lpm/0,75gpm * Max. Pressure: 8bar * Max. Temperature: 38°C./100°F.
Green Filter classic sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (20)
Green Filter classic sediment in line filter 1/4" FPT 2,5"x11" - 5 micron (20)
07001007
Sediment removal. Service life: 1 year - 3.000 gal. - 11.340 liters Maximum flow: 1 gpm - 3,78 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 40°F - 4°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Green Filter sediment in line filter 1/4" J.G. 2"x10" - 5 micron (25)
Green Filter sediment in line filter 1/4" J.G. 2"x10" - 5 micron (25)
07001009
Sediment removal. In/out: 1/4" quick connection Starfit (John Guest type) Service life: 1 year - 2.000 gal. - 7.560 liters Maximum flow: 0,69 gpm - 2,61 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 40°F - 4°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Green Filter sediment in line filter 1/4" J.G. 2,5"x11" - 5 micron (25)
Green Filter sediment in line filter 1/4" J.G. 2,5"x11" - 5 micron (25)
07001010
Sediment removal. In/out: 1/4" quick connection Starfit (John Guest type) Service life: 1 year - 3.000 gal. - 11.340 liters Maximum flow: 1 gpm - 3,78 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 40°F - 4°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Omnipure CL10PF5 Sediment in line filter 1/4" FPT 2"x10" - 5 micron (25)
Omnipure CL10PF5 Sediment in line filter 1/4" FPT 2"x10" - 5 micron (25)
07001011
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter.
details
Service life:
max. 1 year
Flow rate:
0,5 gpm (1,9L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Omnipure K5505 Sediment in line filter 3/8" FPT 2,5"x10" - 5 micron (25)
Omnipure K5505 Sediment in line filter 3/8" FPT 2,5"x10" - 5 micron (25)
07001012
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter.
details
Service life:
max. 1 year
Flow rate:
0,5 gpm (1,9L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Omnipure K5605 Sediment in line filter 1/4" FPT 2,5"x12" - 5 micron (25)
Omnipure K5605 Sediment in line filter 1/4" FPT 2,5"x12" - 5 micron (25)
07001013
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter.
details
Service life:
max. 1 year
Flow rate:
0,5 gpm (1,9L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Ionicore IC-10CGAC coconut granular activated carbon in line filter 1/4" NPT 2"x10" (25)
Ionicore IC-10CGAC coconut granular activated carbon in line filter 1/4" NPT 2"x10" (25)
07001024
Filter made of granular activated carbon deriving from coconut shell for an high level of absorption with high efficiency. Reduction of odor, color, taste, chlorine, dirt, rust, suspended material not visible at naked eye, mold and algae. Ideal for water coolers and post-osmosis. Designed in order to be located inside of machinery. * Improve taste of beverages. * Protect from clogging, corrosion and wear. * No electrical connection required. * Installation horizontal or vertical. * The rapid filter
details
Service life:
1.500 gallons (5.670L) max. 1 year
Flow rate:
0,5 gpm (1,9L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
Ionicore IC-10CCB Coconut Carbon Block in line filter (CB) 1/4" FPT 2"x10" - 10 micron (25)
Ionicore IC-10CCB Coconut Carbon Block in line filter (CB) 1/4" FPT 2"x10" - 10 micron (25)
07002018
Coconut carbon block in line filter deriving from coconut shell for an high level of absorption with high efficiency. Reduction of odor, color, taste, chlorine, dirt, rust, suspended material not visible at naked eye, mold and algae. Ideal for water coolers and post-osmosis. Designed in order to be located inside of machinery. * Improve taste of beverages. * Protect from clogging, corrosion and wear. * No electrical connection required. * Installation horizontal or vertical. * The rapid filter is e
details
Service life:
1.500 gallons (5.670L) max. 1 year
Flow rate:
0,39 gpm (1,5L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
Ionicore IC-11CGAC coconut granular activated carbon in line filter 1/4" NPT 2,5"x11" (25)
Ionicore IC-11CGAC coconut granular activated carbon in line filter 1/4" NPT 2,5"x11" (25)
07001025
Filter made of granular activated carbon deriving from coconut shell for an high level of absorption with high efficiency. Reduction of odor, color, taste, chlorine, dirt, rust, suspended material not visible at naked eye, mold and algae. Ideal for water coolers and post-osmosis. Designed in order to be located inside of machinery. * Improve taste of beverages. * Protect from clogging, corrosion and wear. * No electrical connection required. * Installation horizontal or vertical. * The rapid filter
details
Service life:
2.500 gallons (9.460L) max. 1 year
Flow rate:
1,05 gpm (4L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
Ionicore IC-11SCCB Silver coconut carbon block in line filter 1/4" NPT 2,5"x11" - 0.5, 5 micron (25)
Ionicore IC-11SCCB Silver coconut carbon block in line filter 1/4" NPT 2,5"x11" - 0.5, 5 micron (25)
07001027
Silver coconut carbon block in line filter deriving from coconut shell for an high level of absorption with high efficiency. Reduction of odor, color, taste, chlorine, dirt, rust, suspended material not visible at naked eye, mold and algae. Ideal for water coolers and post-osmosis. Designed in order to be located inside of machinery. * Improve taste of beverages. * Protect from clogging, corrosion and wear. * No electrical connection required. * Installation horizontal or vertical. * The rapid filt
details
Service life 0.5 micron:
1.057 gallons (4.000L) max. 1 year
Service life 5 micron:
1.005 gallons (3.800L) max. 1 year
Flow rate 0.5 micron:
0,52 gpm (2L/min)
Flow rate 5 micron:
1,05 gpm (4L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
 
Ionicore AIC-10CCB Coconut Carbon Block in line filter (CB) 1/4" FPT 2"x10" - 5 micron (25)
Ionicore AIC-10CCB Coconut Carbon Block in line filter (CB) 1/4" FPT 2"x10" - 5 micron (25)
07002021
Coconut carbon block in line filter deriving from coconut shell for an high level of absorption with high efficiency. Reduction of odor, color, taste, chlorine, dirt, rust, suspended material not visible at naked eye, mold and algae. Ideal for water coolers and post-osmosis. Designed in order to be located inside of machinery. * Improve taste of beverages. * Protect from clogging, corrosion and wear. * No electrical connection required. * Installation horizontal or vertical. * The rapid filter is e
Coconut Carbon Block in line filter (CB) 1/4" FPT 2"x10" - 5 micron (25)
Coconut Carbon Block in line filter (CB) 1/4" FPT 2"x10" - 5 micron (25)
07002022
Coconut carbon block in line filter deriving from coconut shell for an high level of absorption with high efficiency. Reduction of odor, color, taste, chlorine, dirt, rust, suspended material not visible at naked eye, mold and algae. Ideal for water coolers and post-osmosis. Designed in order to be located inside of machinery. * Improve taste of beverages. * Protect from clogging, corrosion and wear. * No electrical connection required. * Installation horizontal or vertical. * The rapid filter is e
Granular activated carbon in line filter (GAC) 1/4" FPT 2"x10" (25)
Granular activated carbon in line filter (GAC) 1/4" FPT 2"x10" (25)
07002001
Granular active Carbon manufactured by means of physic activation of mineral source selected raw material. It's incisive for the obliteration of organic pollutants, colorants, pesticides, solvents, phenols, tannins and chlorine that cause stench and bad taste in the water. It's able for the purification of the water fit for human consumption, of the waste water, of the process water and of condensates. It's adequate at the UNI ISO EN 12915 standard. When its absorbent capacity was exhausted it can be rea
Granular activated carbon  in line filter (GAC) 1/4" FPT 2,5"x12" (25)
Granular activated carbon  in line filter (GAC) 1/4" FPT 2,5"x12" (25)
07002002
Granular active Carbon manufactured by means of physic activation of mineral source selected raw material. It's incisive for the obliteration of organic pollutants, colorants, pesticides, solvents, phenols, tannins and chlorine that cause stench and bad taste in the water. It's able for the purification of the water fit for human consumption, of the waste water, of the process water and of condensates. It's adequate at the UNI ISO EN 12915 standard. When its absorbent capacity was exhausted it can be rea
Carbon Block in line filter (CB) 1/4" FPT 2"x10" (25)
Carbon Block in line filter (CB) 1/4" FPT 2"x10" (25)
07002008
Removes smells, tastes, and chlorine from your water that contribute to taste and odor. Specifications: Carbon Block water Filters use a combination of physical and chemical filtering to capture harmful organisms and chemicals found in water. The effectiveness of carbon block water filters is based on the size of the particles -measured in microns- that the filter can capture. Post-Filtering in Line CTO Filters remove small particles and carbon fines that may pass from second stage (GAC Granulated Carbon
Carbon Block in line filter (CB) 1/4", 3/8" FPT 2,5"x12" 5, 10 micron (25)
Carbon Block in line filter (CB) 1/4", 3/8" FPT 2,5"x12" 5, 10 micron (25)
07002003
Removes smells, tastes, and chlorine from your water that contribute to taste and odor. Specifications: Carbon Block water Filters use a combination of physical and chemical filtering to capture harmful organisms and chemicals found in water. The effectiveness of carbon block water filters is based on the size of the particles -measured in microns- that the filter can capture. Post-Filtering in Line CTO Filters remove small particles and carbon fines that may pass from second stage (GAC Granulated Carbon F
Green Filter Granular activated post carbon in line filter (GAC) 1/4" FPT 2"x10" (25)
Green Filter Granular activated post carbon in line filter (GAC) 1/4" FPT 2"x10" (25)
07002004
Carbon postfilter, taste and odor reduction. Service life: 1 year - 1.500 gal. - 5.678 liters Maximum flow: 0,5 gpm - 1,9 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 35°F - 2°C
Ionicore IC-10SCGAC Silver coconut granular activated carbon in line filter 1/4" BSP 2"x10" (25)
Ionicore IC-10SCGAC Silver coconut granular activated carbon in line filter 1/4" BSP 2"x10" (25)
07002020
Silver bacteriostatic granular activated coconut carbon filter, reduction of odor, color, taste, chlorine, dirt, rust, suspended material not visible at naked eye, mold and algae. Ideal for water coolers and post-osmosis. Designed in order to be located inside of machinery. * Improve taste of beverages. * Protect from clogging, corrosion and wear. * No electrical connection required. * Installation horizontal or vertical. * The rapid filter is easy to install and replace without use of special tools
details
Service life:
2.500 gallons (9.460L) max. 1 year
Flow rate:
0,75 gpm (2,85L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
Green Filter Silver Granular activated carbon in line filter (GAC) 1/4" FPT 2"x10" (25)
Green Filter Silver Granular activated carbon in line filter (GAC) 1/4" FPT 2"x10" (25)
07002005
Silver carbon postfilter, taste and odor reduction. Service life: 1 year - 1.500 gal. - 5.678 liters Maximum flow: 0,5 gpm - 1,9 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 35°F - 2°C The contents of this filter is made in USA by Calgon.
Green filter classic granular activated post carbon in line filter (GAC) 1/4" FPT 2"x10" (25)
Green filter classic granular activated post carbon in line filter (GAC) 1/4" FPT 2"x10" (25)
07002012
Carbon postfilter, taste and odor reduction. Service life: 1 year - 1.500 gal. - 5.678 liters Maximum flow: 0,5 gpm - 1,9 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 35°F - 2°C
Green Filter classic granular activated carbon in line filter (GAC) 1/4" FPT 2,5"x11" (20)
Green Filter classic granular activated carbon in line filter (GAC) 1/4" FPT 2,5"x11" (20)
07002011
Carbon prefilter, taste and odor reduction. Service life: 1 year - 2.000 gal. - 7.560 liters Maximum flow: 0,5 gpm - 1,9 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 40°F - 4°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
54 products found - 2 pages
|< <<
1
2
>> >|
Customers Login
e-mail
password

Balance 3-way column chrome-plated brass sparkling cold water dispenser purifier

www.sinergroup.it Everpure Filters