This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

Disposable Cylinder Co2 E290 Water Coolers Reverse Osmosis Microfiltration

order
other filters

Green filter wound polypropylene cartridges 5" - 1, 5, 20, 50 micron (100)
Green filter wound polypropylene cartridges 5" - 1, 5, 20, 50 micron (100)
details
Internal diameter:
28 mm.
External diameter:
62 mm.
Core:
Rigid polypropylene
Efficiency:
80%
Pressure:
6bar (87psi) max.
Max differential pressure:
0,8 bar (80 kpa.)
Temperature Rating:
176°F (80°C) max.
Flow rate 1 micron:
0,66 gpm (2,5L/min)
Flow rate 5 micron:
1,7 gpm (6,6L/min)
Flow rate 20 micron:
3,7 gpm (14,1L/min)
Flow rate 50 micron:
4,1 gpm (15,8L/min)
 
Ionicore wound polypropylene cartridges 9-3/4" - 1, 5, 10, 20, 50, 100 micron (50)
Ionicore wound polypropylene cartridges 9-3/4" - 1, 5, 10, 20, 50, 100 micron (50)
04001006
Filters manufactured with 100% pure polypropylene wire. They reduce sediments, rust and others suspended impurities. The filter is wound around an internal rigid polypropylene core with a precise model, this guarantees an higher filtering surface. The result is an high sediments hold back capacity and an higher efficency then normal wound polypropylene filters. They will not release taste, odor or color to the liquid being filtered when used within the recommended temperature limit. Additionally, the polypr
details
Service life:
When completely dirt - 3, Max. 6 months
Flow rate 1 micron:
1,3 gpm (5L/min)
Flow rate 5 micron:
3,5 gpm (13,3L/min)
Flow rate 10 micron:
4,8 gpm (18,3L/min)
Flow rate 20 micron:
7,4 gpm (28,3L/min)
Flow rate 50 micron:
8,3 gpm (31,6L/min)
Flow rate 100 micron:
8,7 gpm (33,3L/min)
Pressure:
87psi (6bar) max.
Max differential pressure:
80 kpa (0,8 bar)
Temperature Rating:
39,2 - 176°F (4 - 80°C)
Efficiency:
80%
Dimensions H.xO.D.:
9-3/4" x 2-1/2" (Inch) / 248 x 63 (mm.)
I.D. Core:
1,102" (Inch) / 28 (mm.)
Core:
Rigid polypropylene
 
Green filter wound polypropylene cartridges 9-3/4"  - 1, 5, 10, 20, 50, 100 micron (50)
Green filter wound polypropylene cartridges 9-3/4"  - 1, 5, 10, 20, 50, 100 micron (50)
details
Internal diameter:
28 mm.
External diameter:
60 mm.
Core:
Rigid polypropylene
Efficiency:
80%
Pressure:
87psi (6bar) max.
Max differential pressure:
0,8 bar (80 kpa.)
Temperature Rating:
176°F (80°C) max.
Flow rate 1 micron:
1,3 gpm (5L/min)
Flow rate 5 micron:
3,5 gpm (13,3L/min)
Flow rate 10 micron:
4,8 gpm (18,3L/min)
Flow rate 20 micron:
7,4 gpm (28,3L/min)
Flow rate 50 micron:
8,3 gpm (31,6L/min)
Flow rate 100 micron:
8,7 gpm (33,3L/min)
 
Ionicore wound polypropylene cartridge 20" - 1, 5, 10, 20, 50, 100 micron (25)
Ionicore wound polypropylene cartridge 20" - 1, 5, 10, 20, 50, 100 micron (25)
04001007
Filters manufactured with 100% pure polypropylene wire. They reduce sediments, rust and others suspended impurities. The filter is wound around an internal rigid polypropylene core with a precise model, this guarantees an higher filtering surface. The result is an high sediments hold back capacity and an higher efficency then normal wound polypropylene filters. They will not release taste, odor or color to the liquid being filtered when used within the recommended temperature limit. Additionally, the polypr
details
Service life:
When completely dirt - 3, Max. 6 months
Flow rate 1 micron:
2,6 gpm (10L/min)
Flow rate 5 micron:
7 gpm (26,6L/min)
Flow rate 10 micron:
8,7 gpm (33,3L/min)
Flow rate 20 micron:
10,9 gpm (41,6L/min)
Flow rate 50 micron:
15,4 gpm (58,3L/min)
Flow rate 100 micron:
15,8 gpm (60L/min)
Pressure:
87psi (6bar) max.
Max differential pressure:
80 kpa (0,8 bar)
Temperature Rating:
39,2 - 176°F (4 - 80°C)
Efficiency:
80%
Dimensions H.xO.D.:
20" x 2-1/2" (Inch) / 508 x 63,5 (mm.)
I.D. Core:
1,102" (Inch) / 28 (mm.)
Core:
Rigid polypropylene
 
Green filter wound polypropylene cartridge 20" - 1, 5, 10, 20, 50, 100 micron (25)
Green filter wound polypropylene cartridge 20" - 1, 5, 10, 20, 50, 100 micron (25)
details
Internal diameter:
28 mm.
External diameter:
60 mm.
Core:
Polypropylene
Efficiency:
80%
Pressure:
6bar (87psi) max.
Max differential pressure:
0,8 bar (80 kpa.)
Temperature Rating:
176°F (80°C) max.
Flow rate 1 micron:
2,6 gpm (10L/min)
Flow rate 5 micron:
7 gpm (26,6L/min)
Flow rate 10 micron:
8,7 gpm (33,3L/min)
Flow rate 20 micron:
10,9 gpm (41,6L/min)
Flow rate 50 micron:
15,4 gpm (58,3L/min)
Flow rate 100 micron:
15,8 gpm (60L/min)
 
WPP105M wound polypropylene cartridge 20" - 1 micron (25)
WPP105M wound polypropylene cartridge 20" - 1 micron (25)
04001005
The manufacturing procedure is founded on the wrapping of an appropriate polypropylene yarn on a inner bored support (core OD28mm), that produces a particular honeycomb texture that consents to obtain on the filtration mass section some spiral micropass an
Ionicore Big Wound polypropylene cartridge 10" - 1, 5, 10, 20, 50, 100 micron (20)
Ionicore Big Wound polypropylene cartridge 10" - 1, 5, 10, 20, 50, 100 micron (20)
04014001
Filters manufactured with 100% pure polypropylene wire. They reduce sediments, rust and others suspended impurities. The filter is wound around an internal rigid polypropylene core with a precise model, this guarantees an higher filtering surface. The resu
details
Service life:
When completely dirt - 3, Max. 6 months
Flow rate 1 micron:
1,3 gpm (5L/min)
Flow rate 5 micron:
3,5 gpm (13,3L/min)
Flow rate 10 micron:
4,8 gpm (18,3L/min)
Flow rate 20 micron:
7,4 gpm (28,3L/min)
Flow rate 50 micron:
8,3 gpm (31,6L/min)
Flow rate 100 micron:
8,7 gpm (33,3L/min)
Pressure:
87psi (6bar) max.
Max differential pressure:
80 kpa (0,8 bar)
Temperature Rating:
39,2 - 176°F (4 - 80°C)
Efficiency:
80%
Dimensions H.xO.D.:
10" x 4-1/2" (Inch) / 254 x 114 (mm.)
I.D. Core:
1,102" (Inch) / 28 (mm.)
Core:
Rigid polypropylene
 
Ionicore Big Wound polypropylene cartridge 20" - 1, 5, 10, 20, 50, 100 micron (10)
Ionicore Big Wound polypropylene cartridge 20" - 1, 5, 10, 20, 50, 100 micron (10)
04014002
Filters manufactured with 100% pure polypropylene wire. They reduce sediments, rust and others suspended impurities. The filter is wound around an internal rigid polypropylene core with a precise model, this guarantees an higher filtering surface. The resu
details
Service life:
When completely dirt - 3, Max. 6 months
Flow rate 1 micron:
2,6 gpm (10L/min)
Flow rate 5 micron:
7 gpm (26,6L/min)
Flow rate 10 micron:
8,7 gpm (33,3L/min)
Flow rate 20 micron:
10,9 gpm (41,6L/min)
Flow rate 50 micron:
15,4 gpm (58,3L/min)
Flow rate 100 micron:
15,8 gpm (60L/min)
Pressure:
87psi (6bar) max.
Max differential pressure:
80 kpa (0,8 bar)
Temperature Rating:
39,2 - 176°F (4 - 80°C)
Efficiency:
80%
Dimensions H.xO.D.:
20" x 4-1/2" (Inch) / 508 x 114 (mm.)
I.D. Core:
1,102" (Inch) / 28 (mm.)
Core:
Rigid polypropylene
 
Ionicore Blue antibacterial Melt blown polypropylene cartridges 5" - 5 micron (100)
Ionicore Blue antibacterial Melt blown polypropylene cartridges 5" - 5 micron (100)
04002014
Ionicore Blue antibacterial Melt blown polypropylene cartridge is a new type of filter cartridge that meets safer and healthier filtration requirements with high efficiency and dirt holding capacity. The filters are also bacteriostatic for the addiction of silver antibacterial ion to ensure the maximum safety. Features: - 5 microns filtration. - Graded density structure for maximum dirt holding capacity. - Addiction of silver antibacterial ion ingredient to ensure drinking safety. - Micro-denier melt
details
Service life:
When completely dirt - Max. 3 months
Flow rate 5 micron:
3,5 gpm (13,3L/min)
Pressure:
87psi (6bar) max.
Max differential pressure:
80 kpa (0,8 bar)
Temperature Rating:
39,2 - 176°F (4 - 80°C)
Efficiency:
95%
Dimensions H.xO.D.:
5" x 2-1/2" (Inch) / 127 x 63 (mm.)
I.D. Core:
1,102" (Inch) / 28 (mm.)
Core:
Without - Grooves Finishing
 
Ionicore Melt blown polypropylene cartridges 5" - 5, 20 micron (50)
Ionicore Melt blown polypropylene cartridges 5" - 5, 20 micron (50)
04002001
Filters manufactured with 100% pure polypropylene fibers. They reduce sediments, rust and others suspended impurities. The fibers have been carefully spun together to form a true gradient density from outer to inner surface. The result is an high sediments hold back capacity and an higher efficency then normal melt blown polypropylene filters. They will not release taste, odor or color to the liquid being filtered when used within the recommended temperature limit. Additionally, the polypropylene constructi
details
Service life:
When completely dirt - Max. 3 months
Flow rate 5 micron:
3,5 gpm (13,3L/min)
Flow rate 20 micron:
3,7 gpm (14,1L/min)
Pressure:
87psi (6bar) max.
Max differential pressure:
80 kpa (0,8 bar)
Temperature Rating:
39,2 - 176°F (4 - 80°C)
Efficiency:
95%
Dimensions H.xO.D.:
5" x 2-1/2" (Inch) / 127 x 63 (mm.)
I.D. Core:
1,102" (Inch) / 28 (mm.)
Core:
Without - Grooves Finishing
 
Ionicore Melt blown polypropylene cartridges 10" - 1, 5, 10, 20, 50 micron (25)
Ionicore Melt blown polypropylene cartridges 10" - 1, 5, 10, 20, 50 micron (25)
04002010
Filters manufactured with 100% pure polypropylene fibers. They reduce sediments, rust and others suspended impurities. The fibers have been carefully spun together to form a true gradient density from outer to inner surface. The result is an high sediments hold back capacity and an higher efficency then normal melt blown polypropylene filters. They will not release taste, odor or color to the liquid being filtered when used within the recommended temperature limit. Additionally, the polypropylene constructi
details
Service life:
When completely dirt - 3, Max. 6 months
Flow rate 1 micron:
3,5 gpm (13,3L/min)
Flow rate 5 micron:
6,6 gpm (25L/min)
Flow rate 10 micron:
8,7 gpm (33,3L/min)
Flow rate 20 micron:
10,9 gpm (41,6L/min)
Flow rate 50 micron:
11,3 gpm (43,3L/min)
Pressure:
87psi (6bar) max.
Max differential pressure:
80 kpa (0,8 bar)
Temperature Rating:
39,2 - 176°F (4 - 80°C)
Efficiency:
95%
Dimensions H.xO.D.:
10" x 2-1/2" (Inch) / 254 x 63 (mm.)
I.D. Core:
1,102" (Inch) / 28 (mm.)
 
Melt blown polypropylene cartridges 10" - 5 micron (50)
Melt blown polypropylene cartridges 10" - 5 micron (50)
details
Service life:
When completely dirt - 3, Max. 6 months
Flow rate 1 micron:
7,66 gpm (29L/min)
Flow rate 5 micron:
8,18 gpm (31L/min)
Flow rate 10 micron:
8,71 gpm (33L/min)
Flow rate 20 micron:
9,24 gpm (35L/min)
Pressure:
43,5psi (3bar) max.
Max differential pressure:
-
Temperature Rating:
41 - 140°F (5 - 60°C)
Gasket:
Without
End Caps:
Whitout
Reinforcement Backing:
Whitout
Efficiency:
95%
Dimensions H.xO.D.:
10" x 2-1/2" (Inch) / 254 x 63 (mm.)
I.D. Core:
1,141" (Inch) / 29 (mm.)
Core:
Without - Grooves Finishing
 
Ionicore box set of 3 filters 10" Filtering Action (10)
Ionicore box set of 3 filters 10" Filtering Action (10)
04002015
Box set of 4 filters with assembly and maintenance instructions. Includes: Code 04002010-02: Ionicore Melt blown polypropylene cartridges 10" - 5 micron. Code 04004011-04: Ionicore Carbon Block cartridge 2,5"x10" - 5 micron. Code 04005003: Ionicore granular activated carbon cartridge (GAC).
Ionicore box set of 3 filters 10" Antibacterial Silver Action (10)
Ionicore box set of 3 filters 10" Antibacterial Silver Action (10)
04002017
Box set of 3 filters with assembly and maintenance instructions. Includes: Code 04002010-02: Ionicore Melt blown polypropylene cartridges 10" - 5 micron. Code 04004011-04: Ionicore Carbon Block cartridge 2,5"x10" - 5 micron. Code 04005003: Ionicore granular activated carbon cartridge (GAC) 9-3/4".
Green Filter box set of 3 filters 9-3/4" (10)
Green Filter box set of 3 filters 9-3/4" (10)
04002004
Box set of three filters with assembly and maintenance instructions. Includes: Code 04002005-02: 9-3/4” 5-micron melt blown polypropylene cartridge. Code 04005001: 9-3/4” GAC activated carbon cartridge. Code 04004002: 9-3/4” 10-micron pressed carbon block cartridge.
Ionicore box set of 4 filters 10" Filtering Action (12)
Ionicore box set of 4 filters 10" Filtering Action (12)
04002016
Box set of 4 filters with assembly and maintenance instructions. Includes: Code 04002010-02: Ionicore Melt blown polypropylene cartridges 10" - 5 micron. Code 04004011-04: Ionicore Carbon Block cartridge 2,5"x10" - 5 micron. Code 04005003: Ionicore granular activated carbon cartridge (GAC) 9-3/4". Code 07004004: Ionicore remineralizer PH adjustment coconut in line filter (GAC) 1/4" FPT 2"x10".
Ionicore box set of 4 filters 10" Antibacterial Silver Action (12)
Ionicore box set of 4 filters 10" Antibacterial Silver Action (12)
04002018
Box set of 4 filters with assembly and maintenance instructions. Includes: Code 04002009-02: Ionicore Blue antibacterial Melt blown polypropylene cartridge 10" - 5 micron. Code 04004010-04: Ionicore Silver Coconut Carbon Block cartridge 2,5"x10" - 5 micron (20) Code 04005003: Ionicore granular activated carbon cartridge (GAC) 9-3/4". Code 07004004: Ionicore remineralizer PH adjustment coconut in line filter (GAC) 1/4" FPT 2"x10".
Green Filter box set of 4 filters 9-3/4" (10)
Green Filter box set of 4 filters 9-3/4" (10)
04002008
Box set of 4 filters with assembly and maintenance instructions. Includes: Cod. 04002005-02: 9-3/4” 5-micron melt blown polypropylene cartridge. Cod. 04005001: 9-3/4” GAC activated carbon cartridge. Cod. 04004002: 9-3/4” 10-micron pressed carbon block cartridge. Cod. 07002012: 2"x10" Granular activated post carbon in line filter (GAC) 1/4" FPT.
Green Filter Melt blown polypropylene cartridge 9-3/4" - 1, 5, 10, 20, 50 micron (50)
Green Filter Melt blown polypropylene cartridge 9-3/4" - 1, 5, 10, 20, 50 micron (50)
details
Internal diameter:
28 mm.
External diameter:
64 mm.
Efficiency:
95%
Pressure:
6bar (87psi) max.
Max differential pressure:
5 bar (500 kpa) at 21°C
Nax reccomended differential pressure:
2,5 bar (250kpa)
Temperature Rating:
149°F (65°C) max.
Flow rate 1 micron:
3,5 gpm (13,3L/min)
Flow rate 5 micron:
6,6 gpm (25L/min)
Flow rate 10 micron:
8,7 gpm (33,3L/min)
Flow rate 20 micron:
10,9 gpm (41,6L/min)
Flow rate 50 micron:
11,3 gpm (43,3L/min)
 
Ionicore Blue antibacterial Melt blown polypropylene cartridges 10" - 1, 5, 10, 20, 50 micron (50)
Ionicore Blue antibacterial Melt blown polypropylene cartridges 10" - 1, 5, 10, 20, 50 micron (50)
04002009
Ionicore Blue antibacterial Melt blown polypropylene cartridge is a new type of filter cartridge that meets safer and healthier filtration requirements with high efficiency and dirt holding capacity. The filters are also bacteriostatic for the addiction of silver antibacterial ion to ensure the maximum safety. Features: - Range of filtration from 1 to 50 microns. - Graded density structure for maximum dirt holding capacity. - Addiction of silver antibacterial ion ingredient to ensure drinking safety.
details
Service life:
When completely dirt - 3, Max. 6 months
Flow rate 1 micron:
3,5 gpm (13,3L/min)
Flow rate 5 micron:
6,6 gpm (25L/min)
Flow rate 10 micron:
8,7 gpm (33,3L/min)
Flow rate 20 micron:
10,9 gpm (41,6L/min)
Flow rate 50 micron:
11,3 gpm (43,3L/min)
Pressure:
87psi (6bar) max.
Max differential pressure:
80 kpa (0,8 bar)
Temperature Rating:
39,2 - 176°F (4 - 80°C)
Efficiency:
95%
Dimensions H.xO.D.:
10" x 2-1/2" (Inch) / 254 x 63 (mm.)
I.D. Core:
1,102" (Inch) / 28 (mm.)
Core:
Without - Grooves Finishing
 
Ionicore Blue antibacterial Melt blown polypropylene cartridges 20" - 1, 5, 10, 20, 50 micron (25)
Ionicore Blue antibacterial Melt blown polypropylene cartridges 20" - 1, 5, 10, 20, 50 micron (25)
04002012
Ionicore Blue antibacterial Melt blown polypropylene cartridge is a new type of filter cartridge that meets safer and healthier filtration requirements with high efficiency and dirt holding capacity. The filters are also bacteriostatic for the addiction of silver antibacterial ion to ensure the maximum safety. Features: - Range of filtration from 1 to 50 microns. - Graded density structure for maximum dirt holding capacity. - Addiction of silver antibacterial ion ingredient to ensure drinking safety.
details
Service life:
When completely dirt - 3, Max. 6 months
Flow rate 1 micron:
7 gpm (26,5 L/min)
Flow rate 5 micron:
13,2 gpm (49,9 L/min)
Flow rate 10 micron:
17,4 gpm (65,9 L/min)
Flow rate 20 micron:
21,8 gpm (82,5 L/min)
Flow rate 50 micron:
22,6 gpm (85,5L/min)
Pressure:
87psi (6bar) max.
Max differential pressure:
80 kpa (0,8 bar)
Temperature Rating:
39,2 - 176°F (4 - 80°C)
Efficiency:
95%
Dimensions H.xO.D.:
20" x 2-1/2" (Inch) / 508 x 63,5 (mm.)
I.D. Core:
1,102" (Inch) / 28 (mm.)
Core:
Without - Grooves Finishing
 
Ionicore Melt blown polypropylene cartridge 20" - 1, 5, 20, 50 micron (25)
Ionicore Melt blown polypropylene cartridge 20" - 1, 5, 20, 50 micron (25)
04002011
Filters manufactured with 100% pure polypropylene fibers. They reduce sediments, rust and others suspended impurities. The fibers have been carefully spun together to form a true gradient density from outer to inner surface. The result is an high sediments hold back capacity and an higher efficency then normal melt blown polypropylene filters. They will not release taste, odor or color to the liquid being filtered when used within the recommended temperature limit. Additionally, the polypropylene constructi
details
Service life:
When completely dirt - 3, Max. 6 months
Flow rate 1 micron:
6 gpm (23,3L/min)
Flow rate 5 micron:
11,8 gpm (45L/min)
Flow rate 20 micron:
19,8 gpm (75L/min)
Flow rate 50 micron:
20 gpm (76,6L/min)
Pressure:
87psi (6bar) max.
Max differential pressure:
80 kpa (0,8 bar)
Temperature Rating:
39,2 - 176°F (4 - 80°C)
Efficiency:
95%
Dimensions H.xO.D.:
20" x 2-1/2" (Inch) / 508 x 63,5 (mm.)
I.D. Core:
1,102" (Inch) / 28 (mm.)
Core:
Without - Grooves Finishing
 
Green Filter Melt blown polypropylene cartridge 20" - 1, 5, 20, 50 micron (25)
Green Filter Melt blown polypropylene cartridge 20" - 1, 5, 20, 50 micron (25)
details
Internal diameter:
28 mm.
External diameter:
64 mm.
Efficiency:
95%
Pressure:
6bar (87psi) max.
Max differential pressure:
5 bar (500 kpa) at 21°C
Nax reccomended differential pressure:
2,5 bar (250kpa)
Temperature Rating:
149°F (65°C) max.
Flow rate 1 micron:
6 gpm (23,3L/min)
Flow rate 5 micron:
11,8 gpm (45L/min)
Flow rate 20 micron:
19,8 gpm (75L/min)
Flow rate 50 micron:
20 gpm (76,6L/min)
 
Melt blown polypropylene cartridge 2"x12" (25)
Melt blown polypropylene cartridge 2"x12" (25)
04002007
Sediment pre-filter for different models Hydrotech RO System, including the Series 1240 Ver E & M PRO. Application: to remove particles in suspension. Replace cartridge every 6 months.
Ionicore Big Melt blown polypropylene cartridges 10" - 1, 5, 10, 20, 50, 100 micron (20)
Ionicore Big Melt blown polypropylene cartridges 10" - 1, 5, 10, 20, 50, 100 micron (20)
04003003
Filters manufactured with 100% pure polypropylene fibers. They reduce sediments, rust and others suspended impurities. The fibers have been carefully spun together to form a true gradient density from outer to inner surface. The result is an high sediments hold back capacity and an higher efficency then normal melt blown polypropylene filters. They will not release taste, odor or color to the liquid being filtered when used within the recommended temperature limit. Additionally, the polypropylene constructi
details
Service life:
When completely dirt - 3, Max. 6 months
Flow rate 1 micron:
4,70 gpm (18L/min)
Flow rate 5 micron:
7 gpm (26,6L/min)
Flow rate 10 micron:
8,7 gpm (33,3L/min)
Flow rate 20 micron:
10,9 gpm (41,6L/min)
Flow rate 50 micron:
11,3 gpm (43,3L/min)
Flow rate 100 micron:
11,88 gpm (45L/min)
Pressure:
87psi (6bar) max.
Max differential pressure:
80 kpa (0,8 bar)
Temperature Rating:
39,2 - 176°F (4 - 80°C)
Efficiency:
95%
Dimensions H.xO.D.:
10" x 4-1/2" (Inch) / 254 x 114 (mm.)
I.D. Core:
1,102" (Inch) / 28 (mm.)
Core:
Without - Grooves Finishing
 
Green Filter Big Melt blown polypropylene cartridge 9-7/8" - 5, 50 micron (10)
Green Filter Big Melt blown polypropylene cartridge 9-7/8" - 5, 50 micron (10)
04003001
Sand, salt sediment and other suspended impurities removal. 100% pure polypropylene, heat-blown hot-melt fiber. Great capacity for contaminant retention. Longer durability. Low pressure drop. Multilayer structure (the fibers are thinner inside than outside the filter). The internal structure of the cartridge widens from the inside out, which increases the cartridge contaminant retention capacity and improves its useful life. According to the FDA regulations. Chemical resistance: 100% polypropylene.
details
Pressure:
6bar (87psi) max.
Service life:
When completely dirt - 3, Max. 6 months
Flow rate 5 micron:
7 gpm (26,6L/min)
Flow rate 50 micron:
11,3 gpm (43,3L/min)
Max differential pressure:
0,8 bar (80 kpa.)
Temperature Rating:
39.2 - 176°F (4 - 80°C)
Efficiency:
95%
Dimensions H.xO.D.:
9-7/8" x 4-1/2" (Inch) / 251 x 114 (mm.)
I.D. Core:
1,102" (Inch) / 28 (mm.)
Core:
Without - Grooves Finishing
 
Ionicore Big Melt blown polypropylene cartridges 20" - 1, 5, 10, 20, 50, 100 micron (10)
Ionicore Big Melt blown polypropylene cartridges 20" - 1, 5, 10, 20, 50, 100 micron (10)
04003004
Filters manufactured with 100% pure polypropylene fibers. They reduce sediments, rust and others suspended impurities. The fibers have been carefully spun together to form a true gradient density from outer to inner surface. The result is an high sediments hold back capacity and an higher efficency then normal melt blown polypropylene filters. They will not release taste, odor or color to the liquid being filtered when used within the recommended temperature limit. Additionally, the polypropylene constructi
details
Service life:
When completely dirt - 3, Max. 6 months
Flow rate 1 micron:
9,51 gpm (36L/min)
Flow rate 5 micron:
9,51 gpm (36L/min)
Flow rate 10 micron:
10,57 gpm (40L/min)
Flow rate 20 micron:
10,57 gpm (40L/min)
Flow rate 50 micron:
13,21 gpm (50L/min)
Flow rate 100 micron:
15,8 gpm (60L/min)
Pressure:
87psi (6bar) max.
Max differential pressure:
80 kpa (0,8 bar)
Temperature Rating:
39,2 - 176°F (4 - 80°C)
Efficiency:
95%
Dimensions H.xO.D.:
20" x 4-1/2" (Inch) / 508 x 114 (mm.)
I.D. Core:
1,102" (Inch) / 28 (mm.)
Core:
Without - Grooves Finishing
 
Green Filter Big Melt blown polypropylene cartridge 20" - 5, 50 micron (10)
Green Filter Big Melt blown polypropylene cartridge 20" - 5, 50 micron (10)
04003002
Sand, salt sediment and other suspended impurities removal. 100% pure polypropylene, heat-blown hot-melt fiber. Great capacity for contaminant retention. Longer durability. Low pressure drop. Multilayer structure (the fibers are thinner inside than outside the filter). The internal structure of the cartridge widens from the inside out, which increases the cartridge contaminant retention capacity and improves its useful life. According to the FDA regulations. Chemical resistance: 100% polypropylene.
details
Internal diameter (03):
28 mm.
Internal diameter (01):
25 mm.
Internal diameter (02):
25 mm.
External diameter (03):
111 mm.
External diameter (01):
114 mm.
External diameter (02):
114 mm.
Efficiency:
95%
Pressure:
6bar (87psi) max.
Max differential pressure:
0,8 bar (80 kpa.)
Temperature Rating:
176°F (80°C) max.
Flow rate 5 micron:
11,8 gpm (45L/min)
Flow rate 50 micron:
20 gpm (76,6L/min)
 
Carbon Block cartridge 2,5"x5" - 5 micron (50)
Carbon Block cartridge 2,5"x5" - 5 micron (50)
04004001
Carbon block cartridges. Compressed extruded carbon. Dechlorination and stench deletion. For alimentary use.
Carbon Block cartridge 2,5"x5" - 5 micron (50)
Carbon Block cartridge 2,5"x5" - 5 micron (50)
details
Service life:
6 months (max. 1 Year)
Flow rate:
0,79 gpm (3L/min)
Pressure:
120psi (8bar) max.
Max differential pressure:
1 bar (99,99 kpa)
Temperature Rating:
50 - 113°F (10 - 45°C)
Gasket:
PVC
End Caps:
Polypropylene
Outer Casing:
Polypropylene
Netting:
Polyethylene
Efficiency:
65%
Dimensions H.xO.D.:
5" x 2-1/2" (Inch) / 127 x 63 (mm.)
I.D. Core:
1,102" (Inch) / 28 (mm.)
 
70 products found - 3 pages
|< <<
1
23
>> >|
Customers Login
e-mail
password

Soda breezy S Gasatore acqua Soda maker Sparkling water acqua frizzante

www.sinergroup.it Everpure Filters