This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

Long reach faucets mounting wrench reverse osmosi water purifiers butterfly handle soft hair protected skin coconut carbon vitamin-C mineral balls kdf filtration

Water Softeners Autotrol 255.760 Clack WS1 CI Fleck 5600 SXT

Cabinet, two-piece and duplex water softeners

Compare inlet water hardness, required flow rate and resin volume when sizing a water softener. The range includes residential cabinet softeners, separate brine tank models and alternating twin-tank duplex systems.

In the catalogue
Residential cabinet water softeners · Residential single tank water softeners · Duplex water softeners alternating twin columns

order
other filters

Clack WS2 plastic fittings kit from QC to BSPT
Clack WS2 plastic fittings kit from QC to BSPT
15010319
Suitable only with valve 15010315-001
Clack WS2 steel fittings kit from QC to BSPT
Clack WS2 steel fittings kit from QC to BSPT
15010320
Suitable only with valve 15010315-001
O-ring for code 15010413
O-ring for code 15010413
15010414
O-ring for quick-connect drain elbow for BNT valves, cod. 15010413
Clack WS2 plastic fittings kit from QC to QC
Clack WS2 plastic fittings kit from QC to QC
15010321
Suitable only with valve 15010315-001
Water softener AUTOTROL Peanut 368/606 3/4" elect. (Reg. Metered-time) 15 lt. resin
Water softener AUTOTROL Peanut 368/606 3/4" elect. (Reg. Metered-time) 15 lt. resin
15000152
AUTOTROL Peanut automatic cabinet water softener, equipped with an AUTOTROL 368 valve and 606 electronic controller, featuring metered-time regeneration and configurations with 10, 12 and 15 litres of resin. The system uses food-grade strong acid cation exchange resin to reduce water hardness and help limit limescale deposits in plumbing systems and equipment supplied with treated water. During normal operation, the resin retains the ions responsible for water hardness; the regeneration cycle periodicall
Clack WS15 plastic fittings kit from QC to BSPT
Clack WS15 plastic fittings kit from QC to BSPT
15010322
Suitable only with valve 15010314-001
Evo Compact Water softener cabinet suitable with 8x17, 9x17 and 10x17 pressure vessels
Evo Compact Water softener cabinet suitable with 8x17, 9x17 and 10x17 pressure vessels
15015020
Water softener cabinet suitable with 8x17, 9x17 and 10x17 pressu
Evo Plus water softener cabinet suitable with 7x35, 8x35, 9x35, 10x35 pressure vessels
Evo Plus water softener cabinet suitable with 7x35, 8x35, 9x35, 10x35 pressure vessels
15015021
Water softener cabinet suitable with 8x35, 9x35, 10x35 pressure vessels
Automatic water softener valve Clack WS1CI 1" electronic (Reg. Metered-time) from 8 to 30 ltr. resin
Automatic water softener valve Clack WS1CI 1" electronic (Reg. Metered-time) from 8 to 30 ltr. resin
15000153
Automatic water softener Electronic WS1CI Clack valve 1 " (Reg. Metered-time).Low consumption of water and salt per regeneration. Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at night, number of days between regenerations and hardness input. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Is required output minimum hardness of around 15°F, but the most commonl
BNT1650F Valve automatic water softener 1" electronic (Reg. Metered-Time) from 8 to 30 ltr. resin
BNT1650F Valve automatic water softener 1" electronic (Reg. Metered-Time) from 8 to 30 ltr. resin
15000154
Automatic water softening device. BNT1650F valve with Volume/time regeneration. The valve is fully programmable and its programming is quick and easy. Complete with 230V - 50Hz power supply socket. Output hardness regulator integrated into the valve body, by turning the adjustment knob you will mix the raw water with the appliance softened water. An outlet hardness of about 15°F is recommended, however, the most frequently used setting is not less than 5°F. To mix a specific output hardness value, turn the
STRATUM Plus pressure vessels from 5"x17" to 63"x86" with base
STRATUM Plus pressure vessels from 5"x17" to 63"x86" with base
15015612
Pressure vessels for filtration and water softening. STRATUM Plus vessels range is composed of a wide variety of models, which can be adapted to the majority of applications in the domestic, commercial and industrial sectors. 1) Pressure tanks are made of high performance composite material with fiber glass filament winding. 2) All pressure tanks are made by a completely seamless molding technology. 3) All thread inlet made from 30% glass filled PP that provides improved strength, temperature and pres
STRATUM pressure vessels from 5"x17" to 63"x86" with base
STRATUM pressure vessels from 5"x17" to 63"x86" with base
15015613
Pressure vessels for filtration and water softening. STRATUM vessels range is composed of a wide variety of models, which can be adapted to the majority of applications in the domestic, commercial and industrial sectors. 1) Pressure tanks are made of high performance composite material with fiber glass filament winding. 2) All pressure tanks are made by a completely seamless molding technology. 3) All thread inlet made from 30% glass filled PP that provides improved strength, temperature and pressure
STRATUM W pressure vessels from 5"x17" to 63"x86" with base
STRATUM W pressure vessels from 5"x17" to 63"x86" with base
15015614
Pressure vessels for filtration and water softening. STRATUM W vessels range is composed of a wide variety of models, which can be adapted to the majority of applications in the domestic, commercial and industrial sectors. 1) Pressure tanks are made of high performance composite material with fiber glass filament winding. 2) All pressure tanks are made by a completely seamless molding technology. 3) All thread inlet made from 30% glass filled PP that provides improved strength, temperature and pressur
194 products found - 7 pages
|<<<234567
>> >|

www.sinergroup.it Everpure Filters