BNT1650F Single tank water softener valve 1" electronic (Reg. Metered-time) 8lt. resin

BNT1650F Single tank water softener valve 1" electronic (Reg. Metered-time) 8lt. resin

Automatic water softening device. BNT1650F valve with Volume/time regeneration. The valve is fully programmable and its programming is quick and easy. Complete with 230V - 50Hz power supply socket.
Output hardness regulator integrated into the valve body, by turning the adjustment knob you will mix the raw water with the appliance softened water. An outlet hardness of about 15°F is recommended, however, the most frequently used setting is not less than 5°F. To mix a specific output hardness value, turn the regulator a little at a time (1/4" of a turn) and test the water. Repeat the procedure until the desired hardness value is reached. To check the inlet/outlet device water hardness, we recommend to purchase code 13000001 Titrant total hardness (1°F) 15cc single reagent.

TO BUY WITH EVERY SOFTENER
1X 02001014 3-pieces standard housing 10" clear IN-OUT 1" with wrench & wall mounting bracket.
2X 04001006-05 Ionicore wound polypropylene cartridge 9-3/4" - 50 micron (50)
1X 13000001 Titrant total hardness (1°F) 15cc single reagent.

- Water softeners are supplied without salt, we recommend to use pads salt.
- The BNT1650F valve softeners are supplied already complete with bypass.
- Single tank water softeners are supplied filled up to version "40lits."

The softener is programmed with an inlet hardness of 40°F, an outlet hardness of 0°F and a safety regeneration every 7 days.

Benefits and advantages
Reduction of water hardness, which is cause of scale. ENERGY SAVING: the device prevents the formation of deposits in pipes and hydraulic lines. Greater sense of wellness during the shower. Skin soft and clean. Increased duration of appliances and boilers. COST SAVING: reduction in the use of soaps, fabric softeners and chemicals. Reduced maintenance costs. Fully automatic operation. It should just worry about adding salt in the water softner.

Increased sodium (for drinking water)
Most of the sodium consumed is taken with foods, especially ones obtained with industrial processing. Salt is a great preservative and therefore is used as an additive for processed products. The assumption of sodium with the water we drink is relatively low compared to that which is taken with food. All softeners to produce softened water through ion exchange resins in, produce softened water output sodium ions. The recommended sodium limit for water intended for human consumption is 200ppm liter. Depending on the concentration of sodium and water hardness, it is possible that the water presents a sodium concentration of higher than recommended. Where this is the case or if you need to follow a low salt content, it is advisable to install a reverse osmosis home for water to drink.

Features:
- Min. pressure: 20 psi (1,38 bar)
- Max. pressure: 125 psi (8,62 bar)
- Min. temperature: 2°C
- Max. temperature: 38°C
- Water inlet/outlet: 1" male thread
- Drain: hose connection with from 2mt. to 4mt. hose supplied
- Too full: 3/8" hose connector

Model Specifications 15000205-08 8lt. resin (for 1/2 people)
- Exchange capacity: 38ºHFxm3.
- Salt consumption for regeneration: 0,8 Kg./sale.
- Water consumption for regeneration: 40lt.
- Quantity of water treated for regeneration, 30°F-1,26m3, 35°F-1,085m3, 40°F-0,95m3, 45°F-0,844m3, 50°F-0,76m3, 60°F-0,633m3.
- Max. flow 0,9m3/h

Model Specifications 15000205-12 12lt. resin (for 2/3 people)
- Exchange capacity: 51ºHFxm3.
- Salt consumption for regeneration: 1 Kg./sale.
- Water consumption for regeneration: 60lt.
- Quantity of water treated for regeneration, 30°F-1,70m3, 35°F-1,457m3, 40°F-1,275m3, 45°F-1,133m3, 50°F-0,98m3, 60°F-0,85m3.
- Max. flow 1m3/h

Model Specifications 15000205-15 15lt. resin (for 3/4 people)
- Exchange capacity: 76ºHFxm3.
- Salt consumption for regeneration: 1,4 Kg./sale.
- Water consumption for regeneration: 60lt.
- Quantity of water treated for regeneration, 30°F-2,533m3, 35°F-2,171m3, 40°F-1,9m3, 45°F-1,688m3, 50°F-1,52m3, 60°F-1,266m3.
- Max. flow 1,1m3/h

Model Specifications 15000205-20 20lt. resin ( for 4/6 People)
- Exchange capacity: 108ºHFxm3.
- Salt consumption for regeneration: 2,1 Kg./sale.
- Water consumption for regeneration: 100lt.
- Quantity of water treated for regeneration, 30°F-3,6m3, 35°F-3,085m3, 40°F-2,7m3, 45°F-2,4m3, 50°F-2,16m3, 60°F-1,80m3.
- Max. flow 1,7m3/h

Model Specifications 15000205-25 25lt. resin (for 6/8 People)
- Exchange capacity: 121ºHFxm3.
- Salt consumption for regeneration: 2,4 Kg./sale.
- Water consumption for regeneration: 122lt.
- Quantity of water treated for regeneration, 30°F-4,03m3, 35°F-3,457m3, 40°F-3,025m3, 45°F-2,688m3, 50°F-2,42m3, 60°F-2,016m3.
- Max. flow 2m3/h

Model Specifications 15000205-30 30lt. resin (for 6/8/10 People)
- Exchange capacity: 159ºHFxm3.
- Salt consumption for regeneration: 2,9 Kg./sale.
- Water consumption for regeneration: 140lt.
- Quantity of water treated for regeneration, 30°F-5,30m3, 35°F-4,542m3, 40°F-3,975m3, 45°F-3,533m3, 50°F-3,18m3, 60°F-2,65m3.
- Max. flow 2,5m3/h

Model Specifications 15000205-40 40lt. resin
- Exchange capacity: 206ºHFxm3.
- Salt consumption for regeneration: 3,9 Kg./salt.
- Water consumption for regeneration: 186lt.
- Quantity of water treated for regeneration, 30°F-6,866m3, 35°F-5,885m3, 40°F-5,15m3, 45°F-4,577m3, 50°F-4,12m3, 60°F-3,433m3.
- Max. flow 3m3/h

Model Specifications 15000205-50 50lt. resin
- Exchange capacity: 251ºHFxm3.
- Salt consumption for regeneration: 4,8 Kg./salt.
- Water consumption for regeneration: 260lt.
- Quantity of water treated for regeneration, 30°F-8,366m3, 35°F-7,171m3, 40°F-6,275m3, 45°F-5,577m3, 50°F-5,02m3, 60°F-4,183m3.
- Max. flow 3,5m3/h
- The pressure tanks are supplied filled up to version "40lit."

Model Specifications 15000205-60 60lt. resin
- Exchange capacity: 318ºHFxm3.
- Salt consumption for regeneration: 5,8 Kg./salt.
- Water consumption for regeneration: 330lt.
- Quantity of water treated for regeneration, 30°F-10,6m3, 35°F-9,085m3, 40°F-7,95m3, 45°F-7,06m3, 50°F-6,36m3, 60°F-5,3m3.
- Max. flow 5m3/h
- The pressure tanks are supplied filled up to version "40lit."

Model Specifications 15000205-70 70lt. resin
- Exchange capacity: 357ºHFxm3.
- Salt consumption for regeneration: 6,7 Kg./salt.
- Water consumption for regeneration: 380lt.
- Quantity of water treated for regeneration, 30°F-11,9m3, 35°F-10,2m3, 40°F-8,925m3, 45°F-7,93m3, 50°F-7,14m3, 60°F-5,95m3.
- Max. flow 5,5m3/h
- The pressure tanks are supplied filled up to version "40lit."

Model Specifications 15000205-75 75lt. resin
- Exchange capacity: 378ºHFxm3.
- Salt consumption for regeneration: 7,2 Kg./salt.
- Water consumption for regeneration: 430lt.
- Quantity of water treated for regeneration, 30°F-12,6m3, 35°F-10,8m3, 40°F-9,45m3, 45°F-8,4m3, 50°F-7,56m3, 60°F-6,3m3.
- Max. flow 5,7m3/h
- The pressure tanks are supplied filled up to version "40lit."

Model Specifications 15000205-80 80lt. resin
- Exchange capacity: 416ºHFxm3.
- Salt consumption for regeneration: 7,7Kg./salt.
- Water consumption for regeneration: 490lt.
- Quantity of water treated for regeneration, 30°F-13,86m3, 35°F-11,88m3, 40°F-10,4m3, 45°F-9,244m3, 50°F-8,32m3, 60°F-6,933m3.
- Max. flow 6m3/h
- The pressure tanks are supplied filled up to version "40lit."