This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

Worldwide Shipping Delivery Flexable Express International

telephone
(+39)0773.52.30.14
fax
(+39)06.233.234.260
e-mail
info@sinergroup.it

Profine RED small replacement filter - 3lt./min 5 micron (6)

Profine RED  small  replacement filter - 3lt./min 5 micron (6)
printcompareask a
question
Ask a question
x
First name

e-mail (*)

Subject

Text (*)

(*) required fields
sendclose
Informations

Code:
04400103-01

Weight:
0.487 Kg

Brand:
Profine Water Filters
Mfr. Code:
Y21412B

Description
Profine RED small replacement filter - 3lt./min 5 micron (6)
click to enlargeclick to enlargeclick to enlargeclick to enlarge
click on images to enlarge
Full description
Stop sediments as Dirt and Sand.
Profine® RED reduces and removes the water turbidity and suspended material with micro rating 5. The disposable filter is made with extruded polypropylene technology, compliant to DM 25/2012.

Removes dirt, rust, suspended material not visible to the naked eye.

* Ideal for home appliances, technological systems as prefiltration for reverse osmosis and multiple applications of Profine filters.
* Protect from clogging, corrosion and wear.
* No electrical connection required.
* Vertical or horizontal installation.
* The filter is easy to install and replace without use of special tools.

Features:
* Reduction of particulate in suspension

Technology: Extruded polypropylene (PP)
Micron rating: 5 micron
Service life: Until clogging max Dp 2,5 Bar (36,26 psi)
** Capacity varies according to:
* Inlet water quality
* Required flow rate
* Inlet water pressure
* Filter use (continuous or intermittent)

Filter dimensions: HxD (mm.) SMALL 269x87,4(mm.) - 10,59”x3,44"(In.)
Filter dimensions: HxD (mm.) MEDIUM 384x87,4(mm.) - 15,11”x3,44"(In.)
Filter dimensions: HxD (mm.) LARGE 529x87,4(mm.) - 20,82”x3,44"(In.)
(Leave a vertical space of about 7 cm under filter to allow replacement).
Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 5 minutes to allow air purging and flushing of cartridge.
Filters change: When capacity is reached, or when flow comes too slow (precipitates under 0.7bar/10psi), every 6 months but at least annually.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before and after the system. Systems certified for the contaminants reduction may be used with disinfected water that may contain filterable pollutants. All systems must be maintained according to producer instructions.
Note: The contaminants or other substances removed or reduced by this drinking water system are not necessarily in your water.
Related products
Features
Features
Customers Login
e-mail
password

Ionicore UF ultrafiltration membrane water cooler dispensers reverse osmosis microfiltration

www.sinergroup.it Everpure Filters