Runxin manual filter valves, without accessories - 1" F.

Runxin manual filter valves, without accessories - 1" F.

The Runxin F56A and F56F manual valves are primarily designed for filtration systems.
Once the pressure vessel is filled with sand, carbon, or other filtering media, these valves allow the water to be effectively treated by enabling filtration, rinsing, and backwashing operations.
All functions are controlled through a single lever located on the top of the valve.

- Filtration: the valve allows water to flow through the filter for treatment.
- Rinse: the water flow is reversed to clean the filter.
- Backwash: deep cleaning function with reguar water flow, to remove more stubborn impurities in the filter.

These valves offer an economical and reliable solution for water treatment systems that do not require a high level of automation or electrical power supply.
They are ideal for residential, commercial, or small-to-medium industrial applications where manual control is preferred over automatic systems and no automated management is required.

- Runxin F56A: with a flow rate of up to 4,0 m3/h, this valve is perfect for compact filtration systems. It can be installed on tanks ranging from 6" to 12" in diameter and is suitable for applications with lower treatment capacity requirements.

- Runxin F56F: with a flow rate of up to 6,0 m3/h, this valve is recommended for medium-sized filtration systems or applications requiring higher water treatment volumes.
It can be installed on tanks ranging from 8" to 12" in diameter and offers an excellent solution for systems needing greater flow, while maintaining the same ease of use and reliability.

Technical Specifications - Code 15010512-001
- Flow rate: 4,0 m3/h.
- Water turbidity: <20 FTU
- Connections: IN-OUT 1"F.
- Drain: 1"F
- Tank thread: 2.5" (8) NPSM-0
- Bottom distributor pipe connection diameter: 1.05" (27 mm)
- Working pressure (min-max): 1,5~6bar (21,75~87,02psi)
- Operating temperature with water (°C): 5~50
- Compatible tank diameter: 6"~12"

Technical Specifications - Code 15010512-002
- Flow rate: 6,0 m3/h.
- Water turbidity: <20 FTU
- Connections: IN-OUT 1"F.
- Drain: 1"F
- Tank thread: 2.5" (8) NPSM-0
- Bottom distributor pipe connection diameter: 1,25" (32 mm)
- Working pressure (min-max): 1,5~6bar (21,75~87,02psi)
- Operating temperature with water (°C): 5~50
- Compatible tank diameter: 6"~14"