This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

demineralizzation water filters water purifier microfiltration antimicrobial

The Best Week prices
02001014.jpg
Standard housings - Filter housings
10" 3-pieces standard housing clear IN-OUT 1" with wrench & wall mounting bracket  (12)
10" 3-pieces standard housing clear IN-OUT 1" with wrench & wall mounting bracket  (12)
02001014-02
* Polypropylene cap and nut. * Brass-reinforced thread. SAN vessel. * Manual air purging.
details
Working pressure:
1,2 Mpa (12 bar)
Max. operating pressure:
1,5 Mpa (15 bar)
Burst pressure:
2,3 Mpa (23 bar)
Temperature Rating:
113°F (45°C) max.
Size:
(ODxA) 130x315 mm.
04003003_01.jpg
Big Melt blown polypropylene cartridges - Housings Drop In filters
Ionicore Big Melt blown polypropylene cartridges 20" - 5 micron (10)
Ionicore Big Melt blown polypropylene cartridges 20" - 5 micron (10)
04003004-02
Filters manufactured with 100% pure polypropylene fibers. They reduce sediments, rust and others suspended impurities. The fibers have been carefully spun together to form a true gradient density from outer to inner surface. The result is an high sediments hold back capacity and an higher efficency then normal melt blown polypropylene filters. They will not release taste, odor or color to the liquid being filtered when used within the recommended temperature limit. Additionally, the polypropylene constructi
details
Service life:
When completely dirt - 3, Max. 6 months
Flow rate:
9,51 gpm (36L/min)
Pressure:
87psi (6bar) max.
Max differential pressure:
80 kpa (0,8 bar)
Temperature Rating:
39,2 - 176°F (4 - 80°C)
Efficiency:
95%
Dimensions H.xO.D.:
20" x 4-1/2" (Inch) / 508 x 114 (mm.)
I.D. Core:
1,102" (Inch) / 28 (mm.)
Core:
Without - Grooves Finishing
04004010.jpg
Carbon block cartridges - Housings Drop In filters
Ionicore Carbon Block cartridge 2,5"x9-7/8" - 5 micron (25)
Ionicore Carbon Block cartridge 2,5"x9-7/8" - 5 micron (25)
04004011-04
The combination of high performance carbon, unique binders and high quality manufacturing process delivers exceptionally low pressure drop, high dirt holding capacity and excellent contaminant reduction. The carbon block cartridge is made by compressed ext
details
Service life:
2.000 gallons (7.570L) max. 1 year
Flow rate:
0,52 gpm (2L/min)
Pressure:
125psi (8,6bar) max.
Max differential pressure:
103 kpa (1,03 bar)
Temperature Rating:
39,2 - 122°F (4 - 50°C)
Gasket:
TPR - Thermo Poli Rock
End Caps:
Polypropylene
Outer Casing:
Polypropylene
Netting:
Polyethylene
Efficiency:
85%
Dimensions H.xO.D.:
9-7/8" x 2-1/2" (Inch) / 251 x 71 (mm.)
I.D. Core:
1,102" (Inch) / 28 (mm.)
050015.jpg
Reverse osmosis - Household
RO800 PLUS replacement polypropylene + CTO carbon block filter (18)
RO800 PLUS replacement polypropylene + CTO carbon block filter (18)
050040-010
RO800 PLUS is a RO system of the latest generation, designed to offer the highest performances and adapting to the features and the spaces of every kitchen. This device is able to provide up to 1,6 liters per minutes of osmotic water thanks to the 800GPD membrane equipped. Filtration Filter 1: Sediment + Carbon Block Filter 2: RO Membrane 800 GPD + Carbon Gac Filters replacement Once you have closed the inlet water and switched off the device, you just have to extract the filter cover
060059.jpg
Engine vane pumps - Reverse osmosis - spare parts solenoid valves sensors
Rotary pump engine for reverse osmosis and water coolers 120W.
Rotary pump engine for reverse osmosis and water coolers 120W.
060102
Air cooled 120W engine for reverse osmosis rotary pump. Capacitor included. * Specifications: 230-240/220 VAC - 1,0AMP * Frequency: 50/60 Hz * Power: 120W * Motor Rotation: 1320 RPM
07001025.jpg
Activated carbon In line filters - In line filters
Ionicore IC-10CGAC coconut granular activated carbon in line filter 1/4" NPT 2"x10" (25)
Ionicore IC-10CGAC coconut granular activated carbon in line filter 1/4" NPT 2"x10" (25)
07001024
Filter made of granular activated carbon deriving from coconut shell for an high level of absorption with high efficiency. Reduction of odor, color, taste, chlorine, dirt, rust, suspended material not visible at naked eye, mold and algae. Ideal for water coolers and post-osmosis. Designed in order to be located inside of machinery. * Improve taste of beverages. * Protect from clogging, corrosion and wear. * No electrical connection required. * Installation horizontal or vertical. * The rapid filter
details
Service life:
1.500 gallons (5.670L) max. 1 year
Flow rate:
0,5 gpm (1,9L/min)
Pressure:
8,6bar (125psi)
Temperature Rating:
35 - 100°F (2 - 38°C)
090017.jpg
Membranes
Ionicore Keypra RO membrane TFC 2012 - 150GPD (25)
Ionicore Keypra RO membrane TFC 2012 - 150GPD (25)
090026-150
The reverse osmosis (abbreviation: RO, from English Reverse Osmosis) is the process which represents the better water filtration technique, because is not a simply unwanted substances reduction but is able to remove contaminants, harmful and mineral salts at ionic level. The RO membrane element are generally made of polyamide (PA). These R.O. TFC(thin film composite) membranes are available in flow rates ranging from 50 to 400 Gallons per day for use in standard residential membrane housings. All models
details
Permeate flow rate (+/-20%) - Gpd:
150 gal./day (568 lt./day)
Minimum salt rejection:
97%
Stabilized salt rejection:
98%
Operating pressure test:
60 PSI
TDS feed test:
Tap Water (from 250 to 700 ppm)
Water temperature test:
77°F. (25°C.)
Recovery test:
15%
Max. operating pressure:
125 PSIG / 0.86 MPa (8,6 Bar)
Max. feed SDI:
5 (15 min)
Max. feed flow rate:
2 gal./min. (7,57 lt./min.)
Chlorine tolerance:
<0.1 ppm
Max. operating temperature:
113°F. (45°C.)
Ph range:
2-11
Max. feed water turbidity:
1 NTU
Membrane style:
Dry
10002007.jpg
2-way taps - Faucets columns fonts
1-way taps - stainless steel - Faucets columns fonts
12012006_01.jpg
UV complete systems - UV Systems
UltraRays UV complete system 11W. 1/4"
UltraRays UV complete system 11W. 1/4"
12012008-01
AISI 304 stainless steel body, the system is inclusive of clips for the fixing. * Max pressure: 10 bar (145 psi) * Ultraviolet radiation: 30.000 W/cm2 * Flow rate filtered water: 3LT/MIN. (0,8 GPM) * Flow rate osmotized water: 3,8LT/MIN. (1 GPM) * Power supply: 220-240V 50/60Hz 0,07A * Rating power: 14W. * Philips average lamp life: 9.000h. - max. 1 year * Dimensions (mm.): L. 251 x Ø 51
details
Flow rate filtered water:
3LT/MIN. (0,8 GPM)
Flow rate osmotized water:
3,8LT/MIN. (1 GPM)
conduttivimetri.jpg
TDS Tester - Conductivity - temperature - Tester and rapid kit for analysis
TDS-3 TDS & Temp digital meter with black case (10)
TDS-3 TDS & Temp digital meter with black case (10)
13002008
Total Dissolved Solids (TDS) is a parameter used to classify drinking water. Typically expressed in mg/l, it indicates the amount of perfectly dry solid substance that remains after evaporating 1 liter of water. The higher the concentration of mineral salts, the lower the purity of the water. Ideal for all water purification applications, wastewater, aquaculture, and hydroponics. Features: - Hold Function: saves measurements for convenient reading and recording. - Auto-off function: the meter shuts off
13513503.jpg
Maintenance Sanitation home systems - Sanitizing and maintenance products
Disposal sterilizer device for water purifiers unit 1/4"x1/4"
Disposal sterilizer device for water purifiers unit 1/4"x1/4"
13513513
Disposal sterilizer device for water purifiers unit 1/4"x1/4" This useful disposal with reduced dimensions, will allow you to sterilize your device easily and with a minimum use of time. Once the disposal will be connected to the inlet tube, you just have to let the water flow which, passing through it, will come into contact with the chlorine tab contained inside the disposal. The tab will start to gradually melt and will release the chlorine into the device sterilizing it.
13513502.jpg
Maintenance water softeners - Sanitizing and maintenance products
Clean softener 1 bags granulated product to clean resin softeners 30gr. (20)
Clean softener 1 bags granulated product to clean resin softeners 30gr. (20)
13513502
Clean softener is a monodose, granulated product for water softeners. It is perfect for removing and/or preventing iron and other metals contamination on the ion exchange resins. Preventive treatment: Pour into the brine tank at the rate of 1g. per 1Kg. of salt. Cleaning treatment: Pour into the brine tank chimney at the rate of 1g. per 1l. of resin. Wait 10 minutes for the powder to dissolve and make a manual regeneration. In case of a big contamination, repeat the process. Usage: Every 12 months.
15015601.jpg
Pressure Vessels - Water softeners
Fuller pressure vessels 9x35 thread 2.5"(8)NPSM-0 (La898-Lb891-Da233-Db242) 31,60lit. w base
Fuller pressure vessels 9x35 thread 2.5"(8)NPSM-0 (La898-Lb891-Da233-Db242) 31,60lit. w base
15015609-036
Pressure vessels for filtration and water softening. FULLER vessels range is composed of a wide variety of models, which can be adapted to the majority of applications in the domestic, commercial and industrial sectors. 1) Pressure tanks are made of high performance composite material with fiber glass filament winding. 2) All pressure tanks are made by a completely seamless molding technology. 3) All thread inlet made from 30% glass filled PP that provides improved strength, temperature and pressure l
15515605.jpg
Filtering medias - Resins and filtering medias
cartucce-ricaricabili.jpg
Rechargeable cartridges
289500.jpg
Shower filter
Shower filter replacement cartridge (30)
Shower filter replacement cartridge (30)
18018002-04
The main function of this shower filter is to reduce the suspended particles, organics, heavy metals, as chlorine and chlorinated lime, taste and odor, in water to refresh your skin and hair. The filter cartridge is replaceable, please replace it regularly to ensure the performance. Technical data - Flow Rate: 5L/min - Feed Water Pressure: 0.1-0.4Mpa - Feed Water: Municipal tap water - Working temperature: 5-45°C Composition of the filter: PP sediment Calcium sulfite granules Hig
Water Coolers raw materials - Water Coolers
valvola-antiallagamento.jpg
Water Block valves - Installation accessories
Water Block valve (200)
Water Block valve (200)
01013002-01
The valve Water Block is a Security instrument anti-flooding used to control the passage of a volume of water between 5 and 50 liters. Its fuction is to measurement of the passage of the water and...
D009.jpg
DM fit Grey series acetal resin inch size fittings - Fittings - DM fit quick fit
Bottiglie_e_borracce.jpg
Neutral Bottles - Bottles & Water Bottles
Glass Tube Bottles without Cap 75cl
Glass Tube Bottles without Cap 75cl
20520501-02
Transparent glass bottle with a modern and elegant design, ideal for serving still or sparkling water. Its slim, clean shape enhances the transparency of the water and gives the table a neat, refined, and contemporary look. The black screw cap completes the design with a subtle and elegant contrast, making the bottle suitable for both modern environments and more classic settings. Perfect for serving treated, microfiltered, purified, or chilled water, it can be used as a practical and reusable solution t
Customers Login
e-mail
password

Water Softener Valve AUTOTROL 255/760 Regeneration Metered Time

www.sinergroup.it Everpure Filters