This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

Directly RO System CX250 2-Way

Filtration microfiltration at micron level water filters water purifiers

Everpure water filter cartridges and heads

Select Everpure filter cartridges by application, from drinking water to coffee machines and ice makers. Before replacing a cartridge, check the installed head, required flow and rated capacity.

In the catalogue
Everpure assembled kit · Everpure Filter Heads · Everpure filters - Potable Water

order
other filters

Everpure assembled installation kit IN-OUT 1/4" - 1/4" -  wall plug 3/8"
Everpure assembled installation kit IN-OUT 1/4" - 1/4" -  wall plug 3/8"
04306001
Everpure assembled installation kit ready for installation with Hydraulic fitting "T" to intercept the water directly on cold water flexible, with: Hydraulic fitting Tee F.F.M. 3/8" Digiflow 8000T LCD filter life Water meter time/metered in liters Everpure QL2B filter head Features Water Wall inlet: 3/8" Male Female DMfit output pipe: 1/4" Flow rate: varies according to installed cartridge 3.78/7,56lt./Min. (1/2gpm). Installation: Leave a vertical space of about 7 cm
Everpure H-104 Kit base 3.780lt. - 1,9lt./min. 0,5 micron (1)
Everpure H-104 Kit base 3.780lt. - 1,9lt./min. 0,5 micron (1)
EV926270
Everpure H104 Kit base Micro-Pure I filtering media 0,5 micron rating density. It removes giardia cysts and cryptosporidium, asbestos fibers, bad taste and odor, chlorine, dirt, rust, invisible particles, mold and algae. It also reduces oxidized iron, manganese, sulfate and lead. Inhibits the formation of limestone. * Ideal for drinking and cooking in maximum safety. * Improve taste of beverages, sparkling water and post-mix systems. * Protect from clogging, corrosion and wear. * No
Ionicore/Everpure IH2 compatible replacement single filter head 3/8" NPT (12)
Ionicore/Everpure IH2 compatible replacement single filter head 3/8" NPT (12)
04606101
Ionicore IH2 filter head for Ionicore filters Solid and durable construction, low profile, the filter head have same overall diameter dimension of cartridge for all restricted space. Guaranteed against wear and corrosion. The rapid filter is ea
Ionicore/Everpure IH1 compatible replacement single filter head 3/8" NPT (12)
Ionicore/Everpure IH1 compatible replacement single filter head 3/8" NPT (12)
04606102
Ionicore IH1 filter head for Ionicore filters Solid and durable construction, low profile, the filter head have same overall diameter dimension of cartridge for all restricted space. Guaranteed against wear and corrosion. The rapid filter is ea
Everpure compatible replacement single filter head 3/8" NPT (50)
Everpure compatible replacement single filter head 3/8" NPT (50)
04606104
Durable and solid construction, guaranteed against usury and corrosion. The quick cartridge is easy to install and replace. - Connections: thread NPT 3/8" F. - Flow rate: variable according to the installed cartridge. - Dimensions: HxLxD: 81,3x108x114 (mm.) - 3,2"x4,2"x4,5" (In.) - Installation: Leave a vertical space of about 7cm. under filter to allow replacement.
Everpure small compatible replacement single filter head 3/8" NPT (100)
Everpure small compatible replacement single filter head 3/8" NPT (100)
04606105
Durable and solid construction, guaranteed against usury and corrosion. The quick cartridge is easy to install and replace. - Connections: thread NPT 3/8“ F. - Flow rate: variable according to the installed cartridge.
Everpure QL2B replacement single filter head 3/8" NPT (12)
Everpure QL2B replacement single filter head 3/8" NPT (12)
4252-16
Everpure QL2B filter head Designed exclusively for Everpure cartridges. Solid and durable construction, low profile, the filter head have same overall diameter dimension of cartridge for all restricted space. Guaranteed against wear and corrosion. Al
Everpure QL2 replacement single filter head 3/8" NPT (12)
Everpure QL2 replacement single filter head 3/8" NPT (12)
4252-18
Everpure QL2 single support for Everpure filters Designed exclusively for Everpure cartridges. Durable and solid construction, guaranteed against usury and corrosion. All parts have exceeded NSF test for duration, strength of materials, longevity. The quick cartridge is easy to install and replace. • Connections: The connections are 3/8“ female threaded NPT. • Flow rate: variable according to the installed cartridge. 3,78/7,56lt./min.(1/2gpm) • Dimensions: HxLxD: 81,3x108x114(mm.) - 3,2”x4,2"x4,5"
Everpure QL3B replacement single filter head with shut off valve 3/8" NPT (12)
Everpure QL3B replacement single filter head with shut off valve 3/8" NPT (12)
4313-13
Everpure QL3B Designed exclusively for Everpure cartridges, includes water shutoff valve open/close. Durable and solid construction, guaranteed against usury and corrosion. All parts have exceeded NSF test for duration, strength of materials, longevity. The quick cartridge is easy to install and replace. • Connections: The connections are 3/8“ female threaded NPT. • Flow rate: variable according to the installed cartridge. 3,78/7,56lt./min.(1/2gpm) • Dimensions: HxLxD: 76,2x95,24x88,90(mm.) - 3”x3,
Everpure QL1 replacement single filter head 3/8" NPT (24)
Everpure QL1 replacement single filter head 3/8" NPT (24)
EV925618
Everpure QL1 filter head Designed exclusively for Everpure cartridges. Solid and durable construction, low profile, the filter head have same overall diameter dimension of cartridge for all restricted space. Guaranteed against wear and corrosion. All
Everpure QC7I replacement single filter head with shut off valve/flushing 3/8" NPT (1)
Everpure QC7I replacement single filter head with shut off valve/flushing 3/8" NPT (1)
EV9272-41
Everpure QC7I single support for Everpure filters. Designed exclusively for Everpure cartridges, includes water shutoff valve open/close, pressure gauge and valve activation/drain for flushing. Water pressure gauge built helps to monitor the flow properly. Durable and solid construction, guaranteed against usury and corrosion. All parts have exceeded NSF test for duration, strength of materials, longevity. The quick cartridge is easy to install and replace. • Connections: The connections are 3
Everpure QC7I Twin replacement filter head with shut off valve/flushing 3/4" NPT (1)
Everpure QC7I Twin replacement filter head with shut off valve/flushing 3/4" NPT (1)
EV927222
Everpure QC7I Twin, double support for 2 filters Everpure Designed exclusively for Everpure cartridges,includes valve open/close, pressure gauge and valve activation/drain for flushing. Water pressure gauge built helps to monitor the flow properly. Durable and solid construction, guaranteed against usury and corrosion. All parts have exceeded NSF test for duration, strength of materials, longevity. The quick cartridge is easy to install and replace. • Connections: The connections are 3/4“ fema
Everpure QC7I Triple replacement filter head with shut off valve/flushing 3/4" NPT (1)
Everpure QC7I Triple replacement filter head with shut off valve/flushing 3/4" NPT (1)
EV927223
Everpure QC7I, triple support for 3 filters Everpure Designed exclusively for Everpure cartridges,includes valve open/close, pressure gauge and valve activation/drain for flushing. Water pressure gauge built helps to monitor the flow properly. Durable and solid construction, guaranteed against usury and corrosion. All parts have exceeded NSF test for duration, strength of materials, longevity. The quick cartridge is easy to install and replace. • Connections: The connections are 3/4“ female th
Everpure QC7I Quad replacement filter head with shut off valve/flushing 3/4" NPT (1)
Everpure QC7I Quad replacement filter head with shut off valve/flushing 3/4" NPT (1)
EV933611
Everpure QC7I, support for 4 filters Everpure Designed exclusively for Everpure cartridges,includes valve open/close, pressure gauge and valve activation/drain for flushing. Water pressure gauge built helps to monitor the flow properly. Durable and solid construction, guaranteed against usury and corrosion. All parts have exceeded NSF test for duration, strength of materials, longevity. The quick cartridge is easy to install and replace. • Connections: The connections are 3/4“ female threaded
Everpure JT Flushing & Sanitizing Replacement cartridge 2-size (1)
Everpure JT Flushing & Sanitizing Replacement cartridge 2-size (1)
EV960810
Everpure JT SANITIZATION 1* Take the central spout at the cartridge top and pull it out by pulling it outwards (see fig.). The spout with the entire tube will be removed from the cartridge. 2* Add about a Amuchina teaspoon or 90/120 ml. of common hydrogen peroxide (hydrogen peroxide) in the cartridge through the central hole. 3* Lubricate the central O-ring with a good lubricating silicone. Place the spout in the cartridge and insert it into system head. 4* Aft
Everpure compatible replacement single filter head 3/8" NPT (50)
Everpure compatible replacement single filter head 3/8" NPT (50)
04606106
Durable and solid construction, guaranteed against usury and corrosion. The quick cartridge is easy to install and replace. - Connections: thread NPT 3/8" F. - Flow rate: variable according to the installed cartridge.
(Obsolete) Everpure CLARIS S System resins antiscale 490lt.@41,1°F. - 1,9lt./min. 5 micron (1)
(Obsolete) Everpure CLARIS S System resins antiscale 490lt.@41,1°F. - 1,9lt./min. 5 micron (1)
4339-00
Everpure CLARIS S COFFEE, THE, HOT DRINKS, ESPRESSO, VENDING For hot drink dispensers, office coffee machines (ocs), espresso coffee machines. Absolute filtering filtering 5 micron carbon block, removes bad taste and odor, chlorine, dirt, rust, suspended material not visible at naked eye, mold and algae, eliminates the formation of limestone (calcium and magnesium). It protects against blockages, corrosion, wear and limescale. * Ideal for for coffee, vending and espresso machines. *
(Obsolete) Everpure CLARIS M System resins antiscale 810lt.@41,1°F. - 1,9lt./min. 5 micron (1)
(Obsolete) Everpure CLARIS M System resins antiscale 810lt.@41,1°F. - 1,9lt./min. 5 micron (1)
4339-01
Everpure CLARIS M COFFEE, TEA, HOT BEVERAGES, ESPRESSO, VENDING. Suitable for hot beverages vending machines and office or restaurant coffee machines. The 5 micron carbon block filtering, reduces bad taste and odor, chlorine, dirt, rust, small material in suspension, mold and algae. This product prevent the formation of scale (calcium and magnesium) and gives protection from blocks, corrision, usury and scale. - Ideal for coffee machines, vending and espresso. - Improves the tas
(Obsolete) Everpure CLARIS XL System resins antiscale 2.150lt.@41,1°F. - 3,7lt./min. 5 micron (1)
(Obsolete) Everpure CLARIS XL System resins antiscale 2.150lt.@41,1°F. - 3,7lt./min. 5 micron (1)
4339-03
Everpure CLARIS XL COFFEE, TEA, HOT BEVERAGES, ESPRESSO, VENDING. Suitable for hot beverages vending machines and office or restaurant coffee machines. The 5 micron carbon block filtering, reduces bad taste and odor, chlorine, dirt, rust, small material in suspension, mold and algae. This product prevent the formation of scale (calcium and magnesium) and gives protection from blocks, corrision, usury and scale. - Ideal for coffee machines, vending and espresso. - Improves the ta
(Obsolete) Everpure CLARIS XXL System resins antiscale 3.590lt.@41,1°F. - 3,7lt./min. 5 micron (1)
(Obsolete) Everpure CLARIS XXL System resins antiscale 3.590lt.@41,1°F. - 3,7lt./min. 5 micron (1)
4339-04
Everpure CLARIS XXL COFFEE, TEA, HOT BEVERAGES, ESPRESSO, VENDING. Suitable for hot beverages vending machines and office or restaurant coffee machines. The 5 micron carbon block filtering, reduces bad taste and odor, chlorine, dirt, rust, small material in suspension, mold and algae. This product prevent the formation of scale (calcium and magnesium) and gives protection from blocks, corrision, usury and scale. - Ideal for coffee machines, vending and espresso. - Improv
Everpure CLARIS S resins antiscale replacement filter 490lt.@41,1°F. - 1,9lt./min. 5 micron (1)
Everpure CLARIS S resins antiscale replacement filter 490lt.@41,1°F. - 1,9lt./min. 5 micron (1)
4339-10
Everpure CLARIS S COFFEE, TEA, HOT BEVERAGES, ESPRESSO, VENDING. Suitable for hot beverages vending machines and office or restaurant coffee machines. The 5 micron carbon block filtering, reduces bad taste and odor, chlorine, dirt, rust, small material in suspension, mold and algae. This product prevent the formation of scale (calcium and magnesium) and gives protection from blocks, corrision, usury and scale. - Ideal for coffee machines, vending and espresso. - Improves the tas
Everpure CLARIS M resins antiscale replacement filter 810lt.@41,1°F. - 1,9lt./min. 5 micron (1)
Everpure CLARIS M resins antiscale replacement filter 810lt.@41,1°F. - 1,9lt./min. 5 micron (1)
4339-11
Everpure CLARIS M COFFEE, TEA, HOT BEVERAGES, ESPRESSO, VENDING. Suitable for hot beverages vending machines and office or restaurant coffee machines. The 5 micron carbon block filtering, reduces bad taste and odor, chlorine, dirt, rust, small material in suspension, mold and algae. This product prevent the formation of scale (calcium and magnesium) and gives protection from blocks, corrision, usury and scale. - Ideal for coffee machines, vending and espresso. - Improves the tas
Everpure CLARIS L resins antiscale replacement filter 1.500lt.@41,1°F. - 3,7lt./min. 5 micron (1)
Everpure CLARIS L resins antiscale replacement filter 1.500lt.@41,1°F. - 3,7lt./min. 5 micron (1)
4339-12
Everpure CLARIS L COFFEE, TEA, HOT BEVERAGES, ESPRESSO, VENDING. Suitable for hot beverages vending machines and office or restaurant coffee machines. The 5 micron carbon block filtering, reduces bad taste and odor, chlorine, dirt, rust, small material in suspension, mold and algae. This product prevent the formation of scale (calcium and magnesium) and gives protection from blocks, corrision, usury and scale. - Ideal for coffee machines, vending and espresso. - Improves the tas
Everpure CLARIS XL resins antiscale replacement filter 2.150lt.@41,1°F. - 3,7lt./min. 5 micron (1)
Everpure CLARIS XL resins antiscale replacement filter 2.150lt.@41,1°F. - 3,7lt./min. 5 micron (1)
4339-13
Everpure CLARIS XL COFFEE, TEA, HOT BEVERAGES, ESPRESSO, VENDING. Suitable for hot beverages vending machines and office or restaurant coffee machines. The 5 micron carbon block filtering, reduces bad taste and odor, chlorine, dirt, rust, small material in suspension, mold and algae. This product prevent the formation of scale (calcium and magnesium) and gives protection from blocks, corrision, usury and scale. - Ideal for coffee machines, vending and espresso. - Improves the ta
Everpure CLARIS XXL resins antiscale replacement filter 3.590lt.@41,1°F. - 3,7lt./min. 5 micron (1)
Everpure CLARIS XXL resins antiscale replacement filter 3.590lt.@41,1°F. - 3,7lt./min. 5 micron (1)
4339-14
Everpure CLARIS XXL COFFEE, TEA, HOT BEVERAGES, ESPRESSO, VENDING. Suitable for hot beverages vending machines and office or restaurant coffee machines. The 5 micron carbon block filtering, reduces bad taste and odor, chlorine, dirt, rust, small material in suspension, mold and algae. This product prevent the formation of scale (calcium and magnesium) and gives protection from blocks, corrision, usury and scale. - Ideal for coffee machines, vending and espresso. - Improves the taste of the bever
(Obsolete) Everpure CLARIS replacement single filter head 3/8" BSP IN/OUT left (1)
(Obsolete) Everpure CLARIS replacement single filter head 3/8" BSP IN/OUT left (1)
4339-20
Everpure CLARIS replacement single filter head Designed exclusively for Everpure cartridges. Guaranteed against usury and corrosion. All of its parts have suffesfully completed the NSF tests for the lenght, strenght of the materials and longevity. The cartridge is easy and fast to install and replace. Specifications: - Auto Shut-off. - 5 positions adjustable by-pass. - Flow Restrictor. - Backflow Restrictor. - Connections: 3/8" M. BSP tubes connections. - Inlet: Left side. - Out
CLARIS - single filter head 3/8" IN left / OUT right (1)
CLARIS - single filter head 3/8" IN left / OUT right (1)
4339-21
Everpure CLARIS replacement single filter head Designed exclusively for Everpure cartridges. Guaranteed against usury and corrosion. All of its parts have suffesfully completed the NSF tests for the lenght, strenght of the materials and longevity. The cartridge is easy and fast to install and replace. Specifications: - Auto Shut-off. - 5 positions adjustable by-pass. - Flow Restrictor. - Backflow Restrictor. - Connections: 3/8" M. BSP tubes connections. - Inlet: Left side. - Out
CLARIS - Digital Flow Meter (1)
CLARIS - Digital Flow Meter (1)
4339-30
Everpure CLARIS Water meter (Liters) The CLARIS Flow Sensor has been developed specifically to monitor the usage rate of the CLARIS water filter system and to determine the optimum cartridge replacement interval. After setting the programming unit to monitor the specific filter size, the Claris Flow Sensor continually measures the filtrate volume to calculate and display the remaining filtration capacity in litres. Once the available filtration capacity is exhausted or the maximum operation time has been
CLARIS - Gen2 single filter head 3/8" IN left / OUT right (1)
CLARIS - Gen2 single filter head 3/8" IN left / OUT right (1)
4339-90
Everpure CLARIS replacement single filter head Designed exclusively for Everpure cartridges. Guaranteed against usury and corrosion. All of its parts have suffesfully completed the NSF tests for the lenght, strenght of the materials and longevity. The cartridge is easy and fast to install and replace. Specifications: - Auto Shut-off. - 6 positions adjustable by-pass. - Flow Restrictor. - Backflow Restrictor. - Connections: 3/8" M. BSP tubes connections. - Inlet: Left side. - Out
64 products found - 3 pages
|< <<
1
23
>> >|
Customers Login
e-mail
password

Disposable Cylinder Co2 E290 Water Coolers Reverse Osmosis Microfiltration

www.sinergroup.it Everpure Filters