This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

DMfit quick fit fittings check valves acetalic resin metric inch size food&drink beverage compressed air flow systems

Sale Agents Login
agent
password
save password
riduttori.jpgHome
 » 
Installation accessories
 » 
Co2 pressure reducers
order
other filters

XS Co2 pressure reducer for rechargeable cylinder
XS Co2 pressure reducer for rechargeable cylinder
01012001
Galvanic NSF61 food coating Standard UNI EN ISO 2503 CO2 and N2 Pressure Regulators are Tested singly Internal high pressure valve in INOX AISI 300 Teflon gasket
XS Co2 pressure reducer for disposable and rechargeable cylinder
XS Co2 pressure reducer for disposable and rechargeable cylinder
01012002
Galvanic NSF61 food coating Standard UNI EN ISO 2503 CO2 and N2 Pressure Regulators are Tested singly Internal high pressure valve in INOX AISI 300 Teflon gasket.
XS Co2 pressure reducer ACME Cylinder connection 4,5bar
XS Co2 pressure reducer ACME Cylinder connection 4,5bar
01012003
* Low pressure gauge 4.5 bar rear connection * Handle for easy disassembly * 304 AISI Stainless Steel * IN: ACME thread * OUT: 1/8" NPTF F. thread
SR-02 Co2 pressure reducer for disposable cylinder
SR-02 Co2 pressure reducer for disposable cylinder
01012004
SR-02 has everything you need for your safety and always to have under control the operating parameters of your installation of CO2 and N2. * Material Aluminum HR * Treatment Anodized * Input Pressure From 1 to 160 bar * Output Pressure Adjustable * Gauges output pressure * Safety Overpressure (Pop-Off) * In Female thread: 11x1 (disposable cylinder) or 21.8X1/14 "(rechargeable cylinder) via adapter extension. * Out female thread: 1/8" * Flow Rate 15 l/min.
SR adapter extension Co2 pressure regulator for rechargeable cylinders M11x1 a W21.8x1/14"
SR adapter extension Co2 pressure regulator for rechargeable cylinders M11x1 a W21.8x1/14"
01012005
From M11x1 to W21.8x1/14 " With this adapter, it is possibile to use the pressure reducer with rechargeable cylinders.
SR-02 Co2 pressure reducer for rechargeable cylinder
SR-02 Co2 pressure reducer for rechargeable cylinder
01012006
SR-02 has everything you need for your safety and always to have under control the operating parameters of your installation of CO2 and N2. * Material Aluminum HR * Treatment Anodized * Input Pressure From 1 to 160 bar * Output Pressure Adjustable * Gauges output pressure * Safety Overpressure (Pop-Off) * In Female thread: 11x1 (disposable cylinder) or 21.8X1/14 "(rechargeable cylinder) via adapter extension. * Out female thread: 1/8" * Flow Rate 15 l/min.
SR-02 ADV Co2 pressure reducer for rechargeable cylinder 21.8X1/14" (2 gauges)
SR-02 ADV Co2 pressure reducer for rechargeable cylinder 21.8X1/14" (2 gauges)
01012007
SR-02 ADVanced has everything you need for your safety and always to have under control the operating parameters of your installation of CO2 and N2. It gives you protection against overpressure and pressure fluctuations in output. It makes you check the filling of the cylinder. Lets you precisely adjust the pressure of use. The two pressure gauges indicate the charge of the cylinder and the outlet pressure of CO2. * Material Aluminum HR * Treatment Anodized * Input Pressure From 10 to 160 bar * Output P
Replacement Co2 pressure gauge OD 0-250 Bar BSP 1/8" (high pressure) for cod. 01012007
Replacement Co2 pressure gauge OD 0-250 Bar BSP 1/8" (high pressure) for cod. 01012007
01012019
The pressure gauges can be mounted in all the pressure reducers with predisposition, following the correct mounting. To assemble the high-pressure pressure gauge in the HP marked port. The opposit port is dedicated at LP low-pressure pressure gauge mounting. Don't assemble the LP low-pressure pressure gauge in the HP high-pressure pressure gauge dedicated port.
Replacement Co2 pressure gauge OD 40 0-10,0 Bar BSP 1/8" (low pressure) for cod. 01012007
Replacement Co2 pressure gauge OD 40 0-10,0 Bar BSP 1/8" (low pressure) for cod. 01012007
01012020
The pressure gauges can be mounted in all the pressure reducers with predisposition, following the correct mounting. To assemble the high-pressure pressure gauge in the HP marked port. The opposit port is dedicated at LP low-pressure pressure gauge mounting. Don't assemble the LP low-pressure pressure gauge in the HP high-pressure pressure gauge dedicated port.
SR-02 90 Co2 pressure reducer ACME Cylinder connection
SR-02 90 Co2 pressure reducer ACME Cylinder connection
01012008
Pressure reducer low-profile with connection ACME. This regulator requires an height only 2 cm (0.78 inch) allowing the use of ACME cylinders in very small spaces. Mounting and dismounting from the cylinder will not require tools. * Material Aluminum HR * Treatment Anodized * Input Pressure From 1 to 160 bar * Output Pressure Adjustable 0-5,5 bar * Gauges output pressure * Safety Overpressure (Pop-Off) * In Female thread: ACME * Out female thread: 1/8" * Flow Rate 15 l/min.
SR adapter extension Co2 pressure regulator from ACME to M11x1
SR adapter extension Co2 pressure regulator from ACME to M11x1
01012009
With this adapter, it is possibile to use the pressure reducer from rechargeable cylinders to disposable cylinders.
SR-02 Co2 pressure reducer for rechargeable cylinder knob straight
SR-02 Co2 pressure reducer for rechargeable cylinder knob straight
01012010
SR-02 has everything you need for your safety and always to have under control the operating parameters of your installation of CO2 and N2. * Material Aluminum HR * Treatment Anodized * Input Pressure From 1 to 160 bar * Output Pressure Adjustable * Gauges output pressure * Safety Overpressure (Pop-Off) * In Female thread: 11x1 (disposable cylinder) or 21.8X1/14 "(rechargeable cylinder) via adapter extension. * Out female thread: 1/8" * Flow Rate 15 l/min.
SR-Micro Co2 pressure reducer for disposable cylinder
SR-Micro Co2 pressure reducer for disposable cylinder
01012013
The SR-Micro, thanks to a new system presetting "Adaptive comparison" you can forget the classical gauge. Indeed, the pressure (controlled) is indicated with precision (2.5% KI) on the reducer. This has enabled a compact reducer and incredible reliability, SR-Micro is all made of anodized aluminum alloy, stainless steel and, on request, holes forwall bracket (M5). Material: Aluminum HR Input Pressure From 10 to 120 bar Output Pressure: Adjustable (0 - 5,5bar) Safety: Overpressure (Pop-Off) Connecti
SR-Micro Co2 pressure reducer ACME connection
SR-Micro Co2 pressure reducer ACME connection
01012014
The SR-Micro, thanks to a new system presetting "Adaptive comparison" you can forget the classical gauge. Indeed, the pressure (controlled) is indicated with precision (2.5% KI) on the reducer. This has enabled a compact reducer and incredible reliability, SR-Micro is all made of anodized aluminum alloy, stainless steel and, on request, holes forwall bracket (M5). Material: Aluminum HR Input Pressure From 10 to 120 bar Output Pressure: Adjustable (0 - 5,5bar) Safety: Overpressure (Pop-Off) Connecti
Replacement Co2 pressure gauge OD 40 0-10,0 Bar OT 1/8" back connection
Replacement Co2 pressure gauge OD 40 0-10,0 Bar OT 1/8" back connection
01012018
For cod. 01012004-01/-02, 01012008, 01012006-02, 01012010-01.
Customers Login
e-mail
password

DMfit quick fit fittings white series acetal resin inch size food&drink beverage compressed air flow systems

www.sinergroup.it Everpure Filters