This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

DMfit quick fit fittings control valves acetalic resin metric inch size food&drink beverage compressed air flow systems

telephone
(+39)0773.52.30.14
fax
(+39)06.233.234.260
e-mail
info@sinergroup.it

Everpure H-104 replacement filter 3.780lt. - 1,9lt./min. 0,5 micron (6)

Everpure H-104 replacement filter 3.780lt. - 1,9lt./min. 0,5 micron (6)
printask a
question
Ask a question
x
First name

e-mail (*)

Subject

Text (*)

(*) required fields
sendclose
Informations

Code:
EV961216

Weight:
0.7 Kg

Brand:
Everpure

Description
Everpure H-104 replacement filter 3.780lt. - 1,9lt./min. 0,5 micron (6)
click to enlargeclick to enlarge
click on images to enlarge
Full description
Everpure H104
Micro-Pure I filtering media 0,5 micron rating density. It removes giardia cysts and cryptosporidium, asbestos fibers, bad taste and odor, chlorine, dirt, rust, invisible particles, mold and algae. It also reduces oxidized iron, manganese, sulfate and lead. Inhibits the formation of limestone.

* Ideal for drinking and cooking in maximum safety.
* Improve taste of beverages, sparkling water and post-mix systems.
* Protect from clogging, corrosion and wear.
* No electrical connection required.
* Vertical installation.
* The rapid filter is easy to install and replace without use of special tools.

Features:
* Chlorine reduction
* Reduction of cysts
* Reduction of limestone
* Reduction of particulate matter in suspension
* Lead reduction of 15ppm (0.010 mg / L)

• Technology: Powdered activated carbon (PAC), Micro-Pure I
• Micron rating: 0,5 micron
• Service life: 1.000 gallons (3.780 Liters)
** Capacity varies according to:
* Inlet water quality
* Required flow rate
* Inlet water pressure
* Filter use (continuous or intermittent)

• Service flow rate: 1,9 l./Min. (0,5 gpm)
• Temperature: 35 - 100°F (2-38°C)
• Pressure: 10 - 125 psi (0.7 - 8.6 bar), non-shock.
• Size: 4
• Cartridge dimensions HxD (mm.): H104 368x82,5(mm.) - 14,5”x3.25"(In.)
(Leave a vertical space of about 7 cm under filter to allow replacement).
• Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 5 minutes to allow air purging and flushing of cartridge.
• Cartridge change: When capacity is reached, or when flow comes too slow (precipitates under 0.7bar/10psi), every 6 months but at least annually.

Do not use with microbiologically unsafe or unknown quality water without disinfecting first. Cysts reduction certified systems can be used with disinfected water that may contain filterable cysts. All systems must be mantained according to the producer instructions.
Nota bene: The removed or reduced contaminant agent may not necessarily be in your water.
Related products
Customers Login
e-mail
password

Standard housings water purifiers filtration system purifiers polypropylene

www.sinergroup.it Everpure Filters