This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

RO50 RO75 reverse osmosis with tank TDS regulator Membrane 50gpd Membrane 75gpd Pump System UV water purifier

telephone
(+39)0773.52.30.14
fax
(+39)06.233.234.260
e-mail
info@sinergroup.it

AS-414 Water Leak Blocker IN/OUT 1/2" BSP male plastic solenoid valve

AS-414 Water Leak Blocker IN/OUT 1/2" BSP male plastic solenoid valve
printask a
question
Ask a question
x
First name

e-mail (*)

Subject

Text (*)

(*) required fields
sendclose
Informations

Code:
01013003-01

Weight:
0.23 Kg

Description
AS-414 Water Leak Blocker IN/OUT 1/2" BSP male plastic solenoid valve
click to enlargeclick to enlargeclick to enlargeclick to enlarge
click on images to enlarge
Full description
Features:
* Auto shut off water when water leak is detected
* 9V alkaline battery operated
* Auto shut off when low battery power
* Easy installation
* Protection for water filter, water softener

Specification :
* Operating voltage: 9V DC
* Supply current: typical 1.0 mA, maximum 15.0 mA.
* Cable length: 1.5 M for solenoid valve cord
* Water leak detecting method: Control unit with detecting metal put on the floor near water filter
* Environment temperature: -20 ~ 80°C.
* AS-414 Maximum Pressure: 6 Bar
* AS-413BR, AS-414BR Maximum Pressure: 8 Bar

Operating instruction
Installation:
1-Install the proper fitting with the solenoid valve. The thread of solenoid valve is 3/8" or 1/2”. Then connect the inlet tube of the water treatment system with the solenoid valve.
2-Reset to work
Keep pressing button for 4 seconds, the control unit activates solenoid valve to open the inlet tube of water treatment system, and generates a long beep sound.
3-Auto shut off when water leak is detected
The control unit shuts activate solenoid valve to shut off the inlet tube of the water treatment system to block water flow, and generates an acoustic signal, “beep-beep” , and blinks the blue light continuously to notify the water leak is detected. After the leakage problem is solved, keep pressing button for 4 seconds, the control unit activates solenoid valve to open the inlet tube of water treatment system again with a long beep sound.
4-Low power shut off
When the battery power is low, the control unit shuts off the inlet tube of the water treatment system, blinks red light and generates an acoustic signal “beep” to notify that the battery needs to be replaced to keep water leak protection be functional.
Related products

www.sinergroup.it Everpure Filters