Clack WS1TC 1" water softener valve - Time, with injector E, without DLFC, mixing - down flow with accessories

Clack WS1TC 1" water softener valve - Time, with injector E, without DLFC, mixing - down flow with accessories

Water Specialist 1” TC Control Valve
* Solid state microprocessor with easy access front panel settings
* Fully programmable regeneration cycle sequence (maximum 9)
* Programmable regeneration cycle times
* Days override feature; 1 – 28 days available
* Backwash and brining ability to 22" diameter tanks
* Downflow/upflow regeneration
* Stores system configuration and operation data in nonvolatile memory
* Capacitor back-up with up to 2 hour power carry over
* 12-volt output AC Adapter provides safe and easy installation
* Control valve design provides optimum service and backwash rates
* Treated water regenerant refill
* Mixing valve option available
* Low salt alarm
* 24-hour clock
* Reliable and proven DC drive

Accessories included:
1x 15010301-036 - Clack WS1CI / WS1TC replacement ballast 220-240V 15V DC EU plug 2017 new version
1x 15010307-02 - Clack WS1CI / WS1TC Pair fittings 1" Plastic Male BSPT Assembly
1x 15000431 - Upper bayonet screen basket OD 27mm. for Clack

To purchase with each valve according to softener dimensioning:
1x 15010305-01 - Clack WS1CI / WS1TC Installation kit (Required 1st. installation) 0 - 40lt. resin
1x 15010305-02 - Clack WS1CI / WS1TC Installation kit (Required 1st. installation) 50 - 150lt. resin
1x 15010305-03 - Clack WS1CI / WS1TC Installation kit (Required 1st. installation) 200lt. resin

Specifications
Inlet/Outlet Fittings: 1"
Cycles: up to 9
Valve Material: Noryl (1) or equivalent
Regeneration: downflow/upflow

Flow RateS
Service @ 15 psi/1 bar drop (includes bypass and meter): 102 lpm
Backwash @ 25 psi/1.7 bar drop (includes bypass): 102 lpm

Operating Pressures
Minimum/Maximum: 20 - 125 psi (1.4 - 8.6 bar)

Operating Temperatures
Minimum/Maximum: 40º - 110º F (4º – 43º C)

Dimensions & weight
Distributor Pilot: 1.050" OD Pipe (¾" NPS)
Drain Line: 3/4" or 1" NPT
Brine Line: 3/8" or 1/2" OD Poly Tube
Mounting Base: 2-1/2"- 8 NPSM
Height From Top Of Tank: 7 3/8" (187 mm)
Weight: 4.5 lbs (2 kg)

Electrical Specifications AC Adapter
Supply Voltage: 230V AC
Supply Frequency: 50 Hz
Output Voltage: 12V AC
Output Current: 500 mA

Tank Applications
Water Softener: 6" - 22" Diameter
Water Filter (2): 6" - 22" Diameter

Cycles of Operation
Choose up to nine regeneration cycles, in any order, with a wide range of available values:
Backwash: 1 - 120 minutes
Rinse: 1 - 120 minutes
Pause (service): 1 - 480 minutes
Brine (co-current): 1 - 180 minutes
Brine (counter-current): 1 - 180 minutes
Refill (softener): 0.05 - 95.00 Kg
Refill (filter): 0.05 - 95.00 Liters

Options: Backwash Filter, Bypass, Weather Cover
Compatible with the following typical concentrations of regenerants or chemicals: Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, chlorine and chloramines.

>>Exploded a: Front cover and drive assembly<< (Downloadable on-line only)