Automatic water softening device. BNT850HE-PRO-BLE 3/4" valve with Volume/time regeneration and Bluetooth connectivity for water softener management through smartphone App. The valve is fully programmable and its programming is quick and easy. Supplied complete with 230V - 50Hz power adapter.
Output hardness regulator integrated into the valve body, by turning the adjustment knob you will mix the raw water with the appliance softened water. An outlet hardness of about 15°F is recommended, however, the most frequently used setting is not less than 5°F. To mix a specific output hardness value, turn the regulator a little at a time (1/4" of a turn) and test the water. Repeat the procedure until the desired hardness value is reached. To check the inlet/outlet device water hardness, we recommend to purchase code 13000001 Titrant total hardness (1°F) 15cc. single reagent.

TO BUY WITH EVERY SOFTENER
1x 02001014 3-pieces standard housing 10" clear IN-OUT 1" with wrench & wall mounting bracket
2x 04001006-05 Ionicore wound polypropylene cartridge 9-3/4" - 50 micron
1x 13000001 Titrant total hardness (1°F) 15cc. single reagent

- Water softeners are supplied without salt, we recommend to use pads salt.
- The BNT850HE-PRO-BLE 3/4" valve softeners are supplied already complete with by-pass.

The softener is programmed with an inlet hardness of 40°F, an outlet hardness of 0°F and a safety regeneration every 7 days.

Benefits and advantages
Reduction of water hardness, which is cause of scale. ENERGY SAVING: the device prevents the formation of deposits in pipes and hydraulic lines. Greater sense of wellness during the shower. Skin soft and clean. Increased duration of appliances and boilers. COST SAVING: reduction in the use of soaps, fabric softeners and chemicals. Reduced maintenance costs. Fully automatic operation. You only need to worry about adding salt to the water softener.

Increased sodium (for drinking water)
Most of the sodium consumed is taken with foods, especially ones obtained with industrial processing. Salt is a great preservative and therefore is used as an additive for processed products. The assumption of sodium with the water we drink is relatively low compared to that which is taken with food. All softeners to produce softened water through ion exchange resins in, produce softened water output sodium ions. The recommended sodium limit for water intended for human consumption is 200ppm liter. Depending on the concentration of sodium and water hardness, it is possible that the water presents a sodium concentration of higher than recommended. Where this is the case or if you need to follow a low salt content, it is advisable to install a reverse osmosis home for water to drink.

Valve features:
- Flow rate: 4,5 m3/h.
- Connections: IN-OUT 3/4"M.
- Drain line: quick fitting 1/2".
- Brine line: quick fitting 3/8".
- Regeneration: Down flow / Up Flow.
- Pressure vessel connection thread: 2,5"NPSM.
- Bottom distributor pipe connection diameter: 1,05"(27mm.).
- Working pressure (min-max): 1,4 - 8,4bar (20,3 - 121,8psi).
- Working water temperature range (°C): 1 - 42.

Model Specifications 15000145-08 8lt. resin (suitable for 1/2 people)
* Exchange capacity: 44ºHFxm3.
* Salt consumption for regeneration: 1,24 Kg./salt.
* Water consumption for regeneration: 53,6lt.
* Quantity of treated water for regeneration, 30°F-0,68m3, 35°F-1,26m3, 40°F-1,1m3, 45°F-0,98m3, 50°F-0,88m3, 60°F-0,73m3.
* Max. flow 0,32 m3/h.
* Dimensions Europe I - Base (mm.): 480x320 * Height (mm.): 655

Model Specifications 15000145-10 10lt. resin (suitable for 2/3 people)
* Exchange capacity: 55ºHFxm3.
* Salt consumption for regeneration: 1,8 Kg./salt.
* Water consumption for regeneration: 67lt.
* Quantity of treated water for regeneration, 30°F-1,83m3, 35°F-1,57m3, 40°F-1,37m3, 45°F-1,22m3, 50°F-1,1m3, 60°F-0,916m3.
* Max. flow 0,54m3/h.
* Dimensions Europe I - Base (mm.): 480x320 * Height (mm.): 655

Model Specifications 15000145-12 12lt. resin (suitable for 2/3 people)
* Exchange capacity: 66ºHFxm3.
* Salt consumption for regeneration: 1,8 Kg./salt.
* Water consumption for regeneration: 80,4lt.
* Quantity of treated water for regeneration, 30°F-2,2m3, 35°F-1,88m3, 40°F-1,65m3, 45°F-1,46m3, 50°F-1,32m3, 60°F-1,1m3.
* Max. flow 0,54m3/h.
* Dimensions Luxury I - Base (mm.): 605x350 * Height (mm.): 670

Model Specifications 15000145-15 15lt. resin (suitable for 3/4 people)
* Exchange capacity: 90ºHFxm3.
* Salt consumption for regeneration: 2,5 Kg./salt.
* Water consumption for regeneration: 100,5lt.
* Quantity of treated water for regeneration, 30°F-3,00m3, 35°F-2,57m3, 40°F-2,25m3, 45°F-2,00m3, 50°F-1,8m3, 60°F-1,5m3.
* Max. flow 0,68m3/h.
* Dimensions Europe II - Base (mm.): 480x320 * Height (mm.): 1.120

Model Specifications 15000145-20 20lt. resin (suitable for 4/6 People)
* Exchange capacity: 110ºHFxm3.
* Salt consumption for regeneration: 3,2 Kg./salt.
* Water consumption for regeneration: 134lt.
* Quantity of treated water for regeneration, 30°F-3,66m3, 35°F-3,14m3, 40°F-2,75m3, 45°F-2,44m3, 50°F-2,2m3, 60°F-1,83m3.
* Max. flow 0,942m3/h.
* Dimensions Europe II - Base (mm.): 480x320 * Height (mm.): 1.120

Model Specifications 15000145-25 25lt. resin (suitable for 6/8 People)
* Exchange capacity: 137ºHFxm3.
* Salt consumption for regeneration: 3,9 Kg./salt.
* Water consumption for regeneration: 167,5lt.
* Quantity of treated water for regeneration, 30°F-4,56m3, 35°F-3,14m3, 40°F-3,91m3, 45°F-3,04m3, 50°F-2,74m3, 60°F-2,28m3.
* Max. flow 1m3/h.
* Dimensions Europe II - Base (mm.): 480x320 * Height (mm.): 1.120

Model Specifications 15000145-30 30lt. resin (suitable for 6/8/10 People)
* Exchange capacity: 160ºHFxm3.
* Salt consumption for regeneration: 4,3 Kg./salt.
* Water consumption for regeneration: 201lt.
* Quantity of treated water for regeneration, 30°F-5,33m3, 35°F-4,5m3, 40°F-4m3, 45°F-3,55m3, 50°F-3,2m3, 60°F-2,66m3.
* Max. flow 1,47m3/h.
* Dimensions Luxury II - Base (mm.): 605x350 * Height (mm.): 1.120