BNT650T - Plastic yoke kit 3/4"

BNT650T - Plastic yoke kit 3/4"

The BNT650 is a user friendly valve with mechanic regulation. Thanks to its fixed-clicks timer, you will be able to set the regeneration intervals based on the desired timing.
Indicated for commercial and residential usages, the valve can be used both for softening or filtration, with pressure vessels with diameter up to 16"; the valve's body is made of Noryl plastic material.
The hardness regulation of the outlet water can be adjusted with the mixing valve placed on the side of the valve.

Box content:
1x Control Valve.
1x Ballast (Input: 110-240V ~ 220-240V AC ~ 50/60Hz; Output: 12V AC ~ 650mA).
2x 1" thread in-out fitting.
1x Bag with injectors and DLFC.

Technical specifications:
- Flow rate: 4,5 m3/h.
- Connections: IN-OUT 1"M.
- Drain line: quick fitting 1/2".
- Brine line: quick fitting 3/8".
- Regeneration: Down flow.
- Adjustable regeneration cycles in the range 0-99 minutes.
- Pressure vessel connection thread: 2,5"NPSM.
- Bottom distributor pipe connection diameter: 1,05"(27mm.).
- Working pressure (min.-max.): 1,4 - 8,4bar (20,3 - 121,8psi).
- Working water temperature range (°C): 1 - 42.

It is recommended for use with pressure vessels up to 13" in diameter, for water softeners up to 80 liters of resin.