Replacement By-pass for Runxin Valves Once installed on the valve, the by-pass allows to regulate the water hardness and the flow rate of the water during the regeneration process. Runxin replacement by-pass F70A - F70B settings and installation Specifically, it is possible to choose between different settings acting on the ring on the body of the by-pass. Scale from "1" to "4": starting from "1" (water completely softened and little flow rate to the home water supply during the regenera

F73 Twin Alternating Softener Configuration (one valve with 2 pressure vessels) Indicated for automatic residential water softeners; the valve body is made of Noryl plastic material. Regeneration, Automatic meter-time or manual. (Hardness regulation of the outlet water with the by-pass.) With a flow rate of 3,0m3/h, the F73 twin alternating softener configuration is widely used for its ability to carry out service, backwash, brine and slow rinse, brine refill, and a fast rinse through simple parameter m

The Runxin F56A and F56F manual valves are primarily designed for filtration systems. Once the pressure vessel is filled with sand, carbon, or other filtering media, these valves allow the water to be effectively treated by enabling filtration, rinsing, and backwashing operations. All functions are controlled through a single lever located on the top of the valve. - Filtration: the valve allows water to flow through the filter for treatment. - Rinse: the water flow is reversed to clean the filter. -

Indicated for automatic residential water filtration; the valve body is made of Noryl plastic material. Regeneration, Automatic meter-time or manual. Box content: 1x Control Valve. 1x Ballast (Input: 100 - 240V AC ~ 50/60Hz 0.6A max; Output: 12V DC ~ 1.5A, 18W). 1x Interconnection cable 1,2 mt. 1x 1" Drain line female thread. 1x 1" Out-let flow meter connector. 1x 1" Water in-let connector. 1x valve base seal rings. 4x Washer 1". Technical specifications: - Flow rate: 4,0 m3

Indicated for automatic residential water softeners; the valve body is made of Noryl plastic material. Regeneration, Automatic metered-time or manual. Programmable with Up-flow (counter-current) or Down-flow (co-current) regeneration. Outlet water hardness regulation with adjustment screw. Box content: 1x Control Valve. 1x Ballast (Input: 100 - 240V AC ~ 50/60Hz 0.6A max; Output: 12V DC ~ 1.5A, 18W). 1x Valve base seal ring. 1x Drain line fitting 1/2" M. 1x Brine line compression nut 3/8".

Replacement ballast for Runxin valves F63/F67/F68/F69/F73/F79B - 220VAC/50/60Hz-12VDC EU plug

Water softener cabinet suitable with 8x17, 9x17 and 10x17 pressu

Water softener cabinet suitable with 8x35, 9x35, 10x35 pressure vessels

Body: Open valve carter with window. * Brine cover.

Body: Open valve carter with window. * Brine cover.

Body: Open valve carter with window. * Brine cover. * Base.

Body: Open valve carter with window. * Brine cover. * Base.

Body: Open valve carter with window. * Brine cover. * Base. * Side sheet. Tank and brine solution are separated, Do not suffer deformations, The maintenance is quick and easy, More hygiene, Easy to customize.

Body: Open valve carter with window. * Brine cover. * Base. * Side sheet. Tank and brine solution are separated, Do not suffer deformations, The maintenance is quick and easy, More hygiene, Easy to customize.

> The first cabinet with built-in salt well. > No holes and no connections. > Top-handiness. > Quick and easy maintenance. > Tank and brine solution are separated. > Easy to customize. > Innovative design. Body: Open valve carter. * Brine cover. * Salt well cap. * Base.

Body: Clear open valve carter * Brine cover.

Body: Clear open valve carter * Brine cover.

30lit. model (cod. 15015005-01) - Dimensions (mm.) (ODxH) 340 x 470 200lit. model (cod. 15015005-06) - Dimensions (mm.) (ODxH) 530 x 1.050 300lit. model (cod. 15015005-07) - Dimensions (mm.) (ODxH) 735 x 1.180 500lit. model (cod. 15015005-08) - Dimensions (mm.) (ODxH) 910 x 1.130 700lit. model (cod. 15015005-09) - Dimensions (mm.) (ODxH) 970 x 1.180 1.000lit. model (cod. 15015005-10) - Dimensions (mm.) (ODxH) 1.120 x 1.180

Features • Modern innovative style • Designed for Siata valves V132, Fleck valves 4600, 5000, 5600, 6600, 6700 and Autotrol 255 • Available for 18 inches pressure vessels • Direct access to the timer functions and salt loading without removing the cover, but simply by lifting the cover lid • Bespoke cover and cabinet colors on request • Blow-molded cabinet with injection-molded cover • Molded feature allowing fitting a baseless pressure vessel at the bottom of the cabinet • ROHS certified colouring

Features • Modern innovative style • Designed for Siata valves V132, Fleck valves 4600, 5000, 5600, 6600, 6700 and Autotrol 255 • Available for 30 inches pressure vessels • Direct access to the timer functions and salt loading without removing the cover, but simply by lifting the cover lid • Bespoke cover and cabinet colors on request • Blow-molded cabinet with injection-molded cover • Molded feature allowing fitting a baseless pressure vessel at the bottom of the cabinet • ROHS certified colouring

Features • Material: high density polyethylene • Moulding: blow-moulded • Suitable to contain potable water • Designed to accomodate brine well 35lit. model (cod. 15015501-01) • Dimensions in cm (HxWxD) 44x31x31 • Capacity (1st fill)* kg: 20 75lit. model (cod. 15015501-01) • Dimensions in cm (HxWxD) 89x31x31 • Capacity (1st fill)* kg: 40 * Capacity of salt in indicated for first fill, and is subjected to variation