Compatible with other cabinets: Standard 17" model (cod. 15000412-06) . Compatible with Dayton 12,5 liters Standard 35" model (cod. 15000412-08) . Compatible with Dayton 15, 18, 30 liters You can cut and adapt to different models. Cap included.

Thanks to the small grid on the float valve bottom, any infiltration of undissolved salt is reduced.

15000430-01 For pressure vessels up to 48" tall 15000430-02 For pressure vessels up to 65" ta

Dimension (ODxH): 99x63 mm. Suitable for codes: 15010001-001 15010101-057 15010101-058 15010201-001 15010306-001 15010309-001 15010310-001 15010311-001 15010313-001 15010401-001 15010402-001 15010403-001 15010406 15010411-001 15010501-001 15010502-001 15010503-002 15010504-001 15010512-001 15010512-002 15015608 15015611

The brine valve have to be chosen based on the height of the pressure vessel installed in the water softener. In any case, the valves are suitable by adjusting the height to the pressure vessel used. Just follow the instructions below: 15000439-01: Brine valve suitable for all the pressure vessels with height 17" 15000439-02: Brine valve suitable for all the pressure vessels with height 35" 15000439-03: Brine valve suitable for all the pressure vessels with height 44"

Detector for the salt level present in the softener brine tank. When the salt level is reaches the set limit, the weight will pull the lever down and trigger alarm. - Easy installation, no tool needed. Simple and reliable. - Battery-operated (2 AA alkaline batteries), low battery power alarm. - Real-time monitors salt level. - Low salt level alarm, 5 seconds every 15 minutes.