This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

BTR round brine tanks for water softener 25lit 70lit 100lit 145lit 20lit brine well salt grid overflow fitting

telephone
(+39)0773.52.30.14
fax
(+39)06.233.234.260
e-mail
info@sinergroup.it

Profine VIOLET Medium water filter - 2lt./min. 0,5 micron (6)

Profine VIOLET Medium water filter - 2lt./min. 0,5 micron (6)
printcompareask a
question
Ask a question
x
First name

e-mail (*)

Subject

Text (*)

(*) required fields
sendclose
Informations

Code:
04400109-02

Weight:
0.25 Kg

Brand:
Profine Water Filters
Mfr. Code:
Y21420B

Description
Profine VIOLET Medium water filter - 2lt./min. 0,5 micron (6)
click to enlargeclick to enlargeclick to enlargeclick to enlarge
click on images to enlarge
Full description
Profine® VIOLET designed to reduce the temporary hardness of drinking water. Quick-connect cartridge with carboxylic weak cation resin mixed with granular carbon, featuring final carbon block stage with silver ions. If the cartridge is used in food processing equipment, the whole system must comply with the EU regulation 178/2002

Reduces the temporary hardness of water and removes completely scales due to limestone deposits.

* Ideal for hotels, restaurants facilities, Ho.Re.Ca., Coffee Machines and multiple applications of Profine filters.
* Improves taste of beverages, sparkling water and post-mix systems.
* Protects your implants and removes completely scales due to limestone deposits.
* No electrical connection required.
* Vertical installation.
* The filter is easy to install and to replaces without using any special tool.

Features:
* Temporary reduction of water hardness
* Removes completely scales due to limestone deposits

Technology: carboxylic weak cation resin mixed with granular carbon, featuring final carbon block stage with silver ions
Micron rating: 0,5 micron
Service life: depending to the model, see table.
** Capacity varies according to:
* Inlet water quality
* Required flow rate
* Inlet water pressure
* Filter use (continuous or intermittent)

Hardness °dH-°F / Capacity lt.(bypass%):
* 6°dH-10°F / 3.996lt.(0%) - 4.440lt.(10%) - 6.660lt.(40%)
* 8°dH-15°F / 2.664lt.(0%) - 2.960lt.(10%) - 4.440lt.(40%)
* 11°dH-20°F / 1.998lt.(0%) - 2.220lt.(10%) - 3.330lt.(40%)
* 14°dH-25°F / 1.598lt.(0%) - 1.176lt.(10%) - 2.664lt.(40%)
* 17°dH-30°F / 1.332lt.(0%) - 1.480lt.(10%) - 2.220lt.(40%)
* 20°dH-35°F / 1.142lt.(0%) - 1.269lt.(10%) - 1.903lt.(40%)
* 22°dH-40°F / 999lt.(0%) - 1.110lt.(10%) - 1.665lt.(40%)

Filter dimensions: HxD (mm.) SMALL 269x87,4(mm.) - 10,59”x3,44"(In.)
Filter dimensions: HxD (mm.) MEDIUM 384x87,4(mm.) - 15,11”x3,44"(In.)
Filter dimensions: HxD (mm.) LARGE 529x87,4(mm.) - 20,82”x3,44"(In.)
(Leave a vertical space of about 7 cm under filter to allow replacement).
Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 5 minutes to allow air purging and flushing of cartridge.
Filters change: When capacity is reached, or when flow comes too slow (precipitates under 0.7bar/10psi), every 6 months but at least annually.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before and after the system. Systems certified for the contaminants reduction may be used with disinfected water that may contain filterable pollutants. All systems must be maintained according to producer instructions.
Note: The contaminants or other substances removed or reduced by this drinking water system are not necessarily in your water.
Related products
Features
Features
Customers Login
e-mail
password

DMfit quick fit fittings power series steel tubing resin acetalic metric inch size food&drink beverage compressed air flow systems

www.sinergroup.it Everpure Filters