This site uses cookies to improve user experience ok, don't show again read privacy policy x

DMfit quick fit fittings lldpe tubing metric inch size food&drink beverage compressed air flow systems


Profine UF GOLD small antimicrobial replacement filter 10.000lt. - 3lt./min 0,1 micron (6)

Profine UF GOLD small antimicrobial replacement filter 10.000lt. - 3lt./min 0,1 micron (6)
printcompareask a
Ask a question
First name

e-mail (*)


Text (*)

(*) required fields


0.22 Kg

Profine Water Filters
Mfr. Code:

Profine UF GOLD small antimicrobial replacement filter 10.000lt. - 3lt./min 0,1 micron (6)
click to enlargeclick to enlargeclick to enlarge
click on images to enlarge
Full description
Carbon block filtration with antimicrobial 0.5 micron final stage of ultrafiltration (UF) from 0.1 microns.
Absolute barrier broad spectrum against bacteria.

Profine® GOLD remove odor and taste. The disposable filter is made of with extruded carbon block technology and silver for a bacteriostatic action with the final membrane UF Ultrafiltration can remove 99.99999% of bacteria.
Composite structure filter suitable for the treatment of drinking water, compliant to DM 25/2012.

Remove taste and odor, chlorine, dirt, rust, suspended material not visible to the naked eye, mold and algae. Reduction alluminum, ammonium(NH4), iron and solphate.

* Ideal for drinking and cooking in maximum safety.
* Improve taste of beverages, sparkling water and post-mix systems.
* Protect from clogging, corrosion and wear.
* No electrical connection required.
* Vertical or horizontal installation.
* The filter is easy to install and replace without use of special tools.

Profine GOLD range with antimicrobial protection inhibits any potential bacterial growth.

* Chlorine reduction
* Bacteriostatic
* Bacteria and virus reduction
* Reduction of particulate in suspension

Technology: Multistage, Carbon Block (CB) with Ultrafiltration (UF)
Micron rating: 0,1 micron
Service life: depending to the model, see table.
** Capacity varies according to:
* Inlet water quality
* Required flow rate
* Inlet water pressure
* Filter use (continuous or intermittent)

Filter dimensions: HxD (mm.) SMALL 269x87,4(mm.) - 10,59”x3,44"(In.)
Filter dimensions: HxD (mm.) MEDIUM 384x87,4(mm.) - 15,11”x3,44"(In.)
Filter dimensions: HxD (mm.) LARGE 529x87,4(mm.) - 20,82”x3,44"(In.)
(Leave a vertical space of about 7 cm under filter to allow replacement).
Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 5 minutes to allow air purging and flushing of cartridge.
Filters change: When capacity is reached, or when flow comes too slow (precipitates under 0.7bar/10psi), every 6 months but at least annually.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before and after the system. Systems certified for the contaminants reduction may be used with disinfected water that may contain filterable pollutants. All systems must be maintained according to producer instructions.
Note: The contaminants or other substances removed or reduced by this drinking water system are not necessarily in your water.
Related products
Features Everpure Filters