This site uses cookies to improve user experience ok, don't show again read privacy policy x

CS series Water Softener Electronic Valve Regeneration Metered Time saving cleaning protection health pureness beauty  liters resin


Profine OCRA Small water filter - 1,3lt./min. (6)

Profine OCRA Small water filter - 1,3lt./min. (6)
printcompareask a
Ask a question
First name

e-mail (*)


Text (*)

(*) required fields


0.22 Kg

Profine Water Filters
Mfr. Code:

Profine OCRA Small water filter - 1,3lt./min. (6)
click to enlargeclick to enlargeclick to enlargeclick to enlarge
click on images to enlarge
Full description
Profine® OCRA is quick-connect cartridge with strong gel cation softening resin. Filter for softening drinking water, with fixed residual hardness mixing (approx. 25%), for beverage dispensers or similar equipment.
If the cartridge is used in food application equipment, the whole system must comply the EU regulation 178/2002.

Reduces the temporary hardness of water and removes completely scales due to limestone deposits.

* Ideal for hotels, restaurants facilities, Ho.Re.Ca. and multiple applications of Profine filters.
* Improves taste of beverages, sparkling water and post-mix systems.
* Protects your implants and removes completely scales due to limestone deposits.
* No electrical connection required.
* Vertical installation.
* The filter is easy to install and to replaces without using any special tool.

* Temporary reduction of water hardness
* Removes completely scales due to limestone deposits

Technology: strong cation resin
Micron rating: -
Service life: depending to the model, see table.
** Capacity varies according to:
* Inlet water quality
* Required flow rate
* Inlet water pressure
* Filter use (continuous or intermittent)

Filter dimensions: HxD (mm.) SMALL 269x87,4(mm.) - 10,59”x3,44"(In.)
Filter dimensions: HxD (mm.) MEDIUM 384x87,4(mm.) - 15,11”x3,44"(In.)
Filter dimensions: HxD (mm.) LARGE 529x87,4(mm.) - 20,82”x3,44"(In.)
(Leave a vertical space of about 7 cm under filter to allow replacement).
Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 5 minutes to allow air purging and flushing of cartridge.
Filters change: When capacity is reached, or when flow comes too slow (precipitates under 0.7bar/10psi), every 6 months but at least annually.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before and after the system. Systems certified for the contaminants reduction may be used with disinfected water that may contain filterable pollutants. All systems must be maintained according to producer instructions.
Note: The contaminants or other substances removed or reduced by this drinking water system are not necessarily in your water.
Related products
Features Everpure Filters