This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

Ionicore Far-infrared mineral ball post osmosis in line filter

telephone
(+39)0773.52.30.14
fax
(+39)06.233.234.260
e-mail
info@sinergroup.it

Profine YELLOW demineralization water filters

Profine YELLOW demineralization water filters
printcompareask a
question
Ask a question
x
First name

e-mail (*)

Subject

Text (*)

(*) required fields
sendclose
Variants
Code
Description
 
04400107-01
Profine YELLOW small demineralization water filter
 
04400107-02
Profine YELLOW medium demineralization water filter
 
04400107-03
Profine YELLOW large demineralization water filter
 
Informations

Code:
04400107

Weight:
0.22 Kg

Brand:
Profine Water Filters
Mfr. Code:

Description
Profine YELLOW demineralization water filters
click to enlargeclick to enlargeclick to enlargeclick to enlargeclick to enlargeclick to enlargeclick to enlarge
click on images to enlarge
Full description
Demineralizes drinking water, only to technological use. For non drinkable water
Removes the total concentration of mineral salts in the water, mesh filter with mixed bed resin, cationic and anionic.

* Ideal for water at technological use
* Laser cut.
* Analysis laboratories.
* Battery charging forklifts.
* Small boilers and closed circuits.
* Steam generators.
* Protect from clogging, corrosion and wear.
* No electrical connection required.
* Vertical installation with filter head "R" type.
* The filter is easy to install and replace without use of special tools.

Profine YELLOW range is not for drinking use

Features:
* Total water demineralization

Technology: Multistage, mesh filter with mixed bed resin
Micron rating: None
Service life: depending to the model, see table.
** Capacity varies according to:
* Inlet water quality
* Required flow rate
* Inlet water pressure
* Filter use (continuous or intermittent)

Filter dimensions: HxD (mm.) SMALL 269x87,4(mm.) - 10,59”x3,44"(In.)
Filter dimensions: HxD (mm.) MEDIUM 384x87,4(mm.) - 15,11”x3,44"(In.)
Filter dimensions: HxD (mm.) LARGE 529x87,4(mm.) - 20,82”x3,44"(In.)
(Leave a vertical space of about 7 cm under filter to allow replacement).
Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 5 minutes to allow air purging and flushing of cartridge.
Filters change: When capacity is reached, or when flow comes too slow (precipitates under 0.7bar/10psi), every 6 months but at least annually.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before and after the system. Systems certified for the contaminants reduction may be used with disinfected water that may contain filterable pollutants. All systems must be maintained according to producer instructions.
Note: The contaminants or other substances removed or reduced by this drinking water system are not necessarily in your water.
Related products
Features
Features

www.sinergroup.it Everpure Filters