This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

ROC500 water purifier direct flow reverse osmosis 65lt. h. outgoing regulator TDS Membrane 400gpd

telephone
(+39)0773.52.30.14
fax
(+39)06.233.234.260
e-mail
info@sinergroup.it

Everpure assembled installation kit IN-OUT 1/4"-1/4" - wall plug 3/8"

Everpure assembled installation kit IN-OUT 1/4"-1/4" - wall plug 3/8"
printask a
question
Ask a question
x
First name

e-mail (*)

Subject

Text (*)

(*) required fields
sendclose
Variants
Code
Description
 
04306001-01
Everpure assembled installation kit IN-OUT 1/4"-1/4" - wall plug 3/8"
 
04306001-02
Everpure assembled installation kit IN-OUT 1/4"-6mm - wall plug 3/8"
 
04306001-03
Everpure assembled installation kit IN-OUT 1/4"-8mm - wall plug 3/8"
 
04306001-04
Everpure assembled installation kit IN-OUT 3/8"-3/8" - wall plug 3/8"
 
04306001-05
Everpure assembled installation kit IN-OUT 3/8"-10mm - wall plug 3/8"
 
Informations

Code:
04306001

Weight:
0.9 Kg

Description
Everpure assembled installation kit IN-OUT 1/4"-1/4" - wall plug 3/8"
click to enlargeclick to enlargeclick to enlargeclick to enlargeclick to enlargeclick to enlargeclick to enlarge
click on images to enlarge
Full description
Everpure assembled installation kit ready for installation with Hydraulic fitting "T" to intercept the water directly on cold water flexible, with:

Hydraulic fitting Tee F.F.M. 3/8"
Digiflow 8000T LCD filter life Water meter time/metered in liters
Everpure QL2B filter head

Features
Water Wall inlet: 3/8" Male Female
DMfit output pipe: 1/4"
Flow rate: varies according to installed cartridge 3.78/7,56lt./Min. (1/2gpm).
Installation: Leave a vertical space of about 7 cm under filter to allow replacement.
You can drink immediately microfiltered or ultra-filtered water by adding a Everpure filter and a 1-way faucet or 3-way mixer faucet.

Hydraulic fitting Tee F.F.M. 3/8"
It allows you to intercept the water directly on the cold water flexible under the sink.

Digiflow 8000T LCD filter life Water meter time/metered in liters
INSTALLING BATTERY
Slide off the cover case of the battery room, and put into 2AAA batteries.Then slide the cover case back.

SETTING CAPACITY AND TIMING
Keep pressing display button, then press reset button and release both of the buttons. The DigliFlow 8000T will go into setting procedure. The digit will flash to notice you that the setting procedure is on.

SETTING CAPACITY
Press display button to choose the capacity. The sequence is 0-100-200-300...9800-9900-OFF. Then press reset button to save the capacity. Then go into Timing setting. *The capacity mode will be disabled when you choose OFF.

SET TIMING
Press Display button to choose the Timing. The sequence is 0-30-60-90...690-720-OFF. Then press reset to save the Timing. The setting procedure is completed. *The capacity mode will be disabled when you choose OFF. **The setting procedure will be terminated, and go back to the original status if there is no input for 10 seconds.

OPERATING
The DigiFlow 8000T will be automatically on when there is any water flowing through the sensor. It will be automatically off wen there is no water flowing for 10 seconds.

DISPLAY BUTTON:
Press display button is to display the status of the three modes of the DigiFlow 8000T. Capacity mode: showing the capacity left. Timing mode; showing the timing left. Flow rate mode: showing the current flow rate. The sequence is Flow-rate - Timing Capacity...

RESET BUTTON:
Press reset button is to reset the setting to be the last setting.

ALARM - Noticing Alarm
When Capacity is lower than 30 gallons or timing is lower than 7 days, the buzzer will beep once and the digit will beep once and the digit will flash to notice you to prepare changing the filter cartridge when there is any water flowing through DigiFlow 8000T or press the display button.

Warning Alarm
When Capacity reaches 0 gallon or Timing reaches 0 day, the buzzer will beep twice and the digit will flash to notice you to change the filter cartridge when there is any water flowing through Digiflow 8000T or press the display button.

Low Battery Power Alarm
When the battery power lower than normal working level, the buzzer will beep twice to notice you to change the battery. The data will be kept in memory when the battery power is run out or battery is removed.

Everpure QL2B filter head
Designed exclusively for Everpure cartridges .
Construction solid and durable, low profile, It have equal dimensions to diameter of cartridge for all restricted space. Guaranteed against wear and corrosion. All parts have exceeded NSF test for duration, strength of materials, longevity. The rapid filter is easy to install and replace without use of special tools.

Package Contents:
Pcs. 1x R000669-01 Teflon roll 12mmx12mt.x0,1
Pcs. 1x R000915-03 hydraulic fitting Tee F.F.M. 3/8"
Pcs. 1x R000615-03 Bushing F.M. 3/8"x1/4"
Pcs. 1x 01002002-01 Ball Valve with quick fitting Thread 1/4" x quick fitting 1/4"
Pcs. 1x 01009001 Check valve OD Tube 1/4"
Pcs. 2x D001-AMC0406 Straight adaptor OD Tube - NPTF thread 1/4" X 3/8"
Pcs. 1x 01001205 Digiflow 8000T LCD filter life Water meters time/metered in liters
Pcs. 1x R000605-03 Nipple M.M. 3/8"
Pcs. 1x 4252-16 Everpure QL2B replacement single filter head 3/8" NPT
Pcs. 3x D497-ALC04 Imperial size Locking Clip OD Tube 1/4"
Mt. 2x D610-DPE04-B-0300 DM fit LLDPE tubing OD tube 1/4" Blue

Note: When replacing the filter is recommended to sanitize the water inlet line and the system with the Everpure Cod. EV960810 JT 2-size empty filter.
Related products

www.sinergroup.it Everpure Filters