This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

BTS square brine tanks for water softener 70lit 100lit 140lit brine well salt grid overflow fitting

3022.jpgHome
 » 
Cartucce Filtri Drop In
 » 
Wound polypropylene cartridges
order
other filters

Green filter wound polypropylene cartridge 5
Green filter wound polypropylene cartridge 5
details
Internal diameter:
28 mm.
External diameter:
62 mm.
Core:
Polypropylene
Efficiency:
80%
Pressure:
6bar (87psi) max.
Max differential pressure:
0,8 bar (80 kpa.)
Temperature Rating:
176°F (80°C) max.
Flow rate 1 micron:
0,66 gpm (2,5L/min)
Flow rate 5 micron:
1,7 gpm (6,6L/min)
Flow rate 20 micron:
3,7 gpm (14,1L/min)
Flow rate 50 micron:
4,1 gpm (15,8L/min)
 
Green filter wound polypropylene cartridge 9-3/4
Green filter wound polypropylene cartridge 9-3/4
details
Internal diameter:
28 mm.
External diameter:
60 mm.
Core:
Polypropylene
Efficiency:
80%
Pressure:
6bar (87psi) max.
Max differential pressure:
0,8 bar (80 kpa.)
Temperature Rating:
176°F (80°C) max.
Flow rate 1 micron:
1,3 gpm (5L/min)
Flow rate 5 micron:
3,5 gpm (13,3L/min)
Flow rate 10 micron:
4,8 gpm (18,3L/min)
Flow rate 20 micron:
7,4 gpm (28,3L/min)
Flow rate 50 micron:
8,3 gpm (31,6L/min)
Flow rate 100 micron:
8,7 gpm (33,3L/min)
 
Wound polypropylene cartridge 9-3/4
Wound polypropylene cartridge 9-3/4
04001003
Wound fibre honeycomb cartridge. The manufacturing procedure is founded on the wrapping of an appropriate polypropylene yarn on a inner bored support (core diameter 28mm), that produces a particular honeycomb texture that consents to obtain on the filtration mass section some spiral micro-pass and funnel micro-pass. Max temperature: 80°
Ionicore wound polypropylene cartridges 9-3/4
Ionicore wound polypropylene cartridges 9-3/4
details
Service life:
When completely dirt - Max. 6 months
Flow rate 1 micron:
1,3 gpm (5L/min)
Flow rate 5 micron:
3,5 gpm (13,3L/min)
Flow rate 10 micron:
4,8 gpm (18,3L/min)
Flow rate 20 micron:
7,4 gpm (28,3L/min)
Flow rate 50 micron:
8,3 gpm (31,6L/min)
Flow rate 100 micron:
8,7 gpm (33,3L/min)
Pressure:
87psi (6bar) max.
Max differential pressure:
80 kpa (0,8 bar)
Temperature Rating:
39,2 - 176°F (4 - 80°C)
Efficiency:
80%
Dimensions H.xO.D.:
9-3/4" x 2-1/2" (Inch) / 248 x 63 (mm.)
I.D. Core
1,102" (Inch) / 28 (mm.)
Core:
Rigid polypropylene
 
Green filter wound polypropylene cartridge 20
Green filter wound polypropylene cartridge 20
details
Internal diameter:
28 mm.
External diameter:
60 mm.
Core:
Polypropylene
Efficiency:
80%
Pressure:
6bar (87psi) max.
Max differential pressure:
0,8 bar (80 kpa.)
Temperature Rating:
176°F (80°C) max.
Flow rate 1 micron:
2,6 gpm (10L/min)
Flow rate 5 micron:
7 gpm (26,6L/min)
Flow rate 10 micron:
--
Flow rate 20 micron:
10,9 gpm (41,6L/min)
Flow rate 50 micron:
15,4 gpm (58,3L/min)
Flow rate 100 micron:
15,8 gpm (60L/min)
 
WPP105M wound polypropylene cartridge 20
WPP105M wound polypropylene cartridge 20
04001005
The manufacturing procedure is founded on the wrapping of an appropriate polypropylene yarn on a inner bored support (core OD28mm), that produces a particular honeycomb texture that consents to obtain on the filtration mass section some spiral micropass and funnel micro-pass. Yarn Wound Filters are a cost effective solution for the reduction of sand, silt, rust, dirt & scale particles. Max temperature: 80°.
Customers Login
e-mail
password

TFC Greenfilter Membrane 180 GPD

www.sinergroup.it Everpure Filters