This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

BTS square brine tanks for water softener 70lit 100lit 140lit brine well salt grid overflow fitting

209200.jpgHome
 » 
Cartucce Filtri Drop In
 » 
Melt blown polypropylene cartridges
order
other filters

Ionicore Melt blown polypropylene cartridge 5" - 5 micron (100)
Ionicore Melt blown polypropylene cartridge 5" - 5 micron (100)
details
Service life:
When completely dirt - Max. 6 months
Flow rate:
1,05 gpm (4L/min)
Pressure:
75psi (5,17 bar) max.
Max differential pressure:
103 kpa (1,03 bar)
Temperature Rating:
39,2 - 174°F (4 - 79°C)
Efficiency:
95%
Dimensions H.xO.D.:
5" x 2-1/2" (Inch) / 127 x 63 (mm.)
I.D. Core
1,141" (Inch) / 29 (mm.)
Core:
Without - Grooves Finishing
 
Ionicore Melt blown polypropylene cartridges 10
Ionicore Melt blown polypropylene cartridges 10
details
Service life:
When completely dirt - Max. 6 months
Flow rate 1 micron:
3,5 gpm (13,3L/min)
Flow rate 5 micron:
6,6 gpm (25L/min)
Flow rate 10 micron:
8,7 gpm (33,3L/min)
Flow rate 20 micron:
10,9 gpm (41,6L/min)
Flow rate 50 micron:
11,3 gpm (43,3L/min)
Pressure:
87psi (6bar) max.
Max differential pressure:
5 bar (500 kpa) at 21°C
Temperature Rating:
39,2 - 174°F (4 - 79°C)
Efficiency:
95%
Dimensions H.xO.D.:
10" x 2-1/2" (Inch) / 254 x 63 (mm.)
I.D. Core
1,102" (Inch) / 28 (mm.)
 
Melt blown polypropylene cartridge 10" - 1, 5, 10, 20 micron (50)
Melt blown polypropylene cartridge 10" - 1, 5, 10, 20 micron (50)
details
Service life:
When completely dirt - Max. 6 months
Flow rate 1 micron:
7,66 gpm (29L/min)
Flow rate 5 micron:
8,18 gpm (31L/min)
Flow rate 10 micron:
8,71 gpm (33L/min)
Flow rate 20 micron:
9,24 gpm (35L/min)
Pressure:
43,5psi (3bar) max.
Max differential pressure:
-
Temperature Rating:
41 - 140°F (5 - 60°C)
Gasket:
Without
End Caps:
Whitout
Reinforcement Backing:
Whitout
Efficiency:
95%
Dimensions H.xO.D.:
10" x 2-1/2" (Inch) / 254 x 63 (mm.)
I.D. Core
1,141" (Inch) / 29 (mm.)
Core:
Without - Grooves Finishing
 
Green Filter Pack 3 box set of 3 filters 9-3/4
Green Filter Pack 3 box set of 3 filters 9-3/4
04002004
Box set of three filters with assembly and maintenance instructions. Includes: Code 04002005-02: 9-3/4” 5-micron melt blown polypropylene cartridge. Code 04005001: 9-3/4” GAC activated carbon cartridge. Code 04004002: 9-3/4” 10-micron pressed carbon block cartridge.
Green Filter Pack 4 box set of 4 filters 9-3/4" (10)
Green Filter Pack 4 box set of 4 filters 9-3/4" (10)
04002008
Box set of 4 filters with assembly and maintenance instructions. Includes: Code 04002005-02: 9-3/4” 5-micron melt blown polypropylene cartridge. Code 04005001: 9-3/4” GAC activated carbon cartridge. Code 04004002: 9-3/4” 10-micron pressed carbon block cartridge. Code 07002004: 2"x10" Granular activated post carbon in line filter (GAC) 1/4" FPT.
Green Filter Melt blown polypropylene cartridge 9-3/4" - 1, 5, 10, 20, 50 micron (25)
Green Filter Melt blown polypropylene cartridge 9-3/4" - 1, 5, 10, 20, 50 micron (25)
details
Internal diameter:
28 mm.
External diameter:
64 mm.
Efficiency:
95%
Pressure:
6bar (87psi) max.
Max differential pressure:
5 bar (500 kpa) at 21°C
Nax reccomended differential pressure:
2,5 bar (250kpa)
Temperature Rating:
149°F (65°C) max.
Flow rate 1 micron:
3,5 gpm (13,3L/min)
Flow rate 5 micron:
6,6 gpm (25L/min)
Flow rate 10 micron:
8,7 gpm (33,3L/min)
Flow rate 20 micron:
10,9 gpm (41,6L/min)
Flow rate 50 micron:
11,3 gpm (43,3L/min)
 
Ionicore Blue antibacterial Melt blown polypropylene cartridges 10
Ionicore Blue antibacterial Melt blown polypropylene cartridges 10
04002009
Ionicore Blue antibacterial Melt blown polypropylene cartridge is a new type of filter cartridge that meets safer and healthier filtration requirements with high efficiency and dirt holding capacity. The filters are also bacteriostatic for the addiction of silver antibacterial ion to ensure the maximum safety. Features: - Range of filtration from 1 to 50 microns. - Graded density structure for maximum dirt holding capacity. - Addiction of silver antibacterial ion ingredient to ensure drinking safety.
details
Service life:
When completely dirt - Max. 6 months
Flow rate 1 micron:
3,5 gpm (13,3L/min)
Flow rate 5 micron:
6,6 gpm (25L/min)
Flow rate 10 micron:
8,7 gpm (33,3L/min)
Flow rate 20 micron:
10,9 gpm (41,6L/min)
Flow rate 50 micron:
11,3 gpm (43,3L/min)
Pressure:
6bar (87psi) max.
Max differential pressure:
5 bar (500 kpa) at 21°C
Temperature Rating:
39,2 - 174°F (4 - 79°C)
Efficiency:
90%
Dimensions H.xO.D.:
10" x 2-1/2" (Inch) / 254 x 63 (mm.)
I.D. Core
1,102" (Inch) / 28 (mm.)
Core:
Without - Grooves Finishing
 
Ionicore Blue antibacterial Melt blown polypropylene cartridges 20
Ionicore Blue antibacterial Melt blown polypropylene cartridges 20
04002012
Ionicore Blue antibacterial Melt blown polypropylene cartridge is a new type of filter cartridge that meets safer and healthier filtration requirements with high efficiency and dirt holding capacity. The filters are also bacteriostatic for the addiction of silver antibacterial ion to ensure the maximum safety. Features: - Range of filtration from 1 to 50 microns. - Graded density structure for maximum dirt holding capacity. - Addiction of silver antibacterial ion ingredient to ensure drinking safety.
details
Service life:
When completely dirt - Max. 6 months
Flow rate 1 micron:
7 gpm (26,5 L/min)
Flow rate 5 micron:
13,2 gpm (49,9 L/min)
Flow rate 10 micron:
17,4 gpm (65,9 L/min)
Flow rate 20 micron:
21,8 gpm (82,5 L/min)
Flow rate 50 micron:
22,6 gpm (85,5 L/min)
Pressure:
6bar (87psi) max.
Max differential pressure:
5 bar (500 kpa) at 21°C
Temperature Rating:
39,2 - 174°F (4 - 79°C)
Efficiency:
90%
Dimensions H.xO.D.:
20" x 2-1/2" (Inch) / 508 x 63 (mm.)
I.D. Core
1,102" (Inch) / 28 (mm.)
Core:
Without - Grooves Finishing
 
Ionicore Melt blown polypropylene cartridge 20" - 1, 5, 20, 50 micron
Ionicore Melt blown polypropylene cartridge 20" - 1, 5, 20, 50 micron
details
Service life:
When completely dirt - Max. 6 months
Pressure:
87psi (6bar) max.
Max differential pressure:
5 bar (500 kpa) at 21°C
Temperature Rating:
149°F (65°C) max.
Efficiency:
95%
Dimensions H.xO.D.:
20" x 2-1/2" (Inch) / 508 x 63 (mm.)
I.D. Core
1,102" (Inch) / 28 (mm.)
 
Green Filter Melt blown polypropylene cartridge 20" - 1, 5, 20, 50 micron (25)
Green Filter Melt blown polypropylene cartridge 20" - 1, 5, 20, 50 micron (25)
details
Internal diameter:
28 mm.
External diameter:
64 mm.
Efficiency:
95%
Pressure:
6bar (87psi) max.
Max differential pressure:
5 bar (500 kpa) at 21°C
Nax reccomended differential pressure:
2,5 bar (250kpa)
Temperature Rating:
149°F (65°C) max.
Flow rate 1 micron:
6 gpm (23,3L/min)
Flow rate 5 micron:
11,8 gpm (45L/min)
Flow rate 20 micron:
19,8 gpm (75L/min)
Flow rate 50 micron:
20 gpm (76,6L/min)
 
Melt blown polypropylene cartridge 2
Melt blown polypropylene cartridge 2
04002007
Sediment pre-filter for different models Hydrotech RO System, including the Series 1240 Ver E & M PRO. Application: to remove particles in suspension. Replace cartridge every 6 months.
Customers Login
e-mail
password

TFC Greenfilter Membrane 180 GPD

www.sinergroup.it Everpure Filters