Languages
Products
15000202
FLECK 5600 SXT Electronic valve Automatic meter/time regeneration . Program with high performance which allows a low water and salt per regeneration consumption. Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter time, day of week, time of regeneration, typically 02.00 at night, number of days between regenerations and hardness input. Complete with plug adapter 12/230V - 50Hz European plug.
Hardness regulator output. Is raccomended a minimum hardness in outpu
details
Dimensions ØxH (mm.) - 8lit.:
203x627
Pressure vessel - 8lit.:
8"x17"
Brine tank ØxH (mm.) - 8lit.:
285x440 - capacity salt 25lit.
Dimensions ØxH (mm.) - 12lit.:
178x957
Pressure vessel - 12lit.:
7"x30"
Brine tank ØxH (mm.) - 12lit.:
285x440 - capacity salt 25lit.
Dimensions ØxH (mm.) - 15lit.:
178x1.084
Pressure vessel - 15lit.:
7"x35"
Brine tank ØxH (mm.) - 15lit.:
400x815 - capacity salt 70lit.
Dimensioni ØxA (mm.) - 20lit.:
203x1.084
Pressure vessel - 20lit.:
8"x35"
Brine tank ØxH (mm.) - 20lit.:
400x815 - capacity salt 70lit.
Dimensions ØxH (mm.) - 25lit.:
228x1.084
Pressure vessel - 25lit.:
9"x35"
Brine tank ØxH (mm.) - 25lit.:
400x815 - capacity salt 70lit.
Dimensions ØxH (mm.) - 30lit.:
254x1.084
Pressure vessel - 30lit.:
10"x35"
Brine tank ØxH (mm.) - 30lit.:
400x815 - capacity salt 70lit.
Dimensions ØxH (mm.) - 40lit.:
254x1.313
Pressure vessel - 40lit.:
10"x44"
Brine tank ØxH (mm.) - 40lit.:
460x875 - capacity salt 100lit.
Dimensions ØxH (mm.) - 50lit.:
254x1.567
Pressure vessel - 50lit.:
10"x54"
Brine tank ØxH (mm.) - 50lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 60lit.:
305x1.415
Pressure vessel - 60lit.:
12"x48"
Brine tank ØxH (mm.) - 60lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 70lit.:
330x1.567
Pressure vessel - 70lit.:
13"x54"
Brine tank ØxH (mm.) - 70lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 75lit.:
330x1.567
Pressure vessel - 75lit.:
13"x54"
Pressure vessel - 75lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 80lit.:
330x1.567
Pressure vessel - 80lit.:
13"x54"
Brine tank ØxH (mm.) - 80lit.:
585x1.040 - capacity salt 200lit.
15000205
Automatic water softening device. BNT1650F valve with Volume/time regeneration. The valve is fully programmable and its programming is quick and easy. Complete with 230V - 50Hz power supply socket.
Output hardness regulator integrated into the valve body, by turning the adjustment knob you will mix the raw water with the appliance softened water. An outlet hardness of about 15°F is recommended, however, the most frequently used setting is not less than 5°F. To mix a specific output hardness value, turn th
details
Dimensions ØxH (mm.) - 8lit.:
203x619
Pressure vessel - 8lit.:
8"x17"
Brine tank ØxH (mm.) - 8lit.:
285x440 - capacity salt 25lit.
Dimensions ØxH (mm.) - 12lit.:
178x949
Pressure vessel - 12lit.:
7"x30"
Brine tank ØxH (mm.) - 12lit.:
285x440 - capacity salt 25lit.
Dimensions ØxH (mm.) - 15lit.:
178x1.076
Pressure vessel - 15lit.:
7"x35"
Brine tank ØxH (mm.) - 15lit.:
400x815 - capacity salt 70lit.
Dimensioni ØxA (mm.) - 20lit.:
203x1.076
Pressure vessel - 20lit.:
8"x35"
Brine tank ØxH (mm.) - 20lit.:
400x815 - capacity salt 70lit.
Dimensions ØxH (mm.) - 25lit.:
228x1.076
Pressure vessel - 25lit.:
9"x35"
Brine tank ØxH (mm.) - 25lit.:
400x815 - capacity salt 70lit.
Dimensions ØxH (mm.) - 30lit.:
254x1.076
Pressure vessel - 30lit.:
10"x35"
Brine tank ØxH (mm.) - 30lit.:
400x815 - capacity salt 70lit.
Dimensions ØxH (mm.) - 40lit.:
254x1.305
Pressure vessel - 40lit.:
10"x44"
Brine tank ØxH (mm.) - 40lit.:
460x875 - capacity salt 100lit.
Dimensions ØxH (mm.) - 50lit.:
254x1.559
Pressure vessel - 50lit.:
10"x54"
Brine tank ØxH (mm.) - 50lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 60lit.:
254x1.407
Pressure vessel - 60lit.:
12"x48"
Brine tank ØxH (mm.) - 60lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 70lit.:
330x1.559
Pressure vessel - 70lit.:
13"x54"
Brine tank ØxH (mm.) - 70lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 75lit.:
330x1.559
Pressure vessel - 75lit.:
13"x54"
Pressure vessel - 75lit.:
516x950 - capacity salt 145lit.
Dimensions ØxH (mm.) - 80lit.:
330x1.559
Pressure vessel - 80lit.:
13"x54"
Brine tank ØxH (mm.) - 80lit.:
585x1.040 - capacity salt 200lit.
15000206
Automatic water softener. The BNT650 is a user friendly valve with mechanic regulation. Thanks to its fixed-clicks timer, you will be able to set the regeneration intervals based on the desired timing.
Indicated for commercial and residential usages, the valve can be used both for softening or filtration, with pressure vessels with diameter up to 16"; the valve's body is made of Noryl plastic material.
Complete with ballast 110/240V - 50/60Hz.
The hardness regulation of the outlet water can be adjusted w
15000207
Automatic water softener. Electronic AUTOTROL valve 255/740 Logix 1" (Reg. Time). Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at night. Complete with plug adapter 12/230V - 50Hz European plug.
Hardness regulator output. Clutching the set screw is going to open the clapper by-pass, which allow you to mix raw water with water treated by device. At the first turn of the screw, the water hardness
details
Dimensions ØxH (mm.) - 8lit.:
203x632
Pressure vessel - 8lit.:
8"x17"
Brine tank ØxH (mm.) - 8lit.:
340x470 - capacity salt 30lit.
Dimensions ØxH (mm.) - 12lit.:
178x959
Pressure vessel - 12lit.:
7"x30"
Brine tank ØxH (mm.) - 12lit.:
340x470 - capacity salt 30lit.
Dimensions ØxH (mm.) - 15lit.:
196X1.087
Pressure vessel - 15lit.:
7"x35"
Brine tank ØxH (mm.) - 15lit.:
340x905 - capacity salt 75lit.
Dimensioni ØxA (mm.) - 20lit.:
203x1.087
Pressure vessel - 20lit.:
8"x35"
Brine tank ØxH (mm.) - 20lit.:
340x905 - capacity salt 75lit.
Dimensions ØxH (mm.) - 25lit.:
228x1.091
Pressure vessel - 25lit.:
9"x35"
Brine tank ØxH (mm.) - 25lit.:
340x905 - capacity salt 75lit.
Dimensions ØxH (mm.) - 30lit.:
254x1.087
Pressure vessel - 30lit.:
10"x35"
Brine tank ØxH (mm.) - 30lit.:
340x905 - capacity salt 75lit.
Dimensions ØxH (mm.) - 35lit.:
254x1.318
Pressure vessel - 35lit.:
10"x44"
Brine tank ØxH (mm.) - 35lit.:
340x1.160 - capacity salt 100lit.
Dimensions ØxH (mm.) - 40lit.:
254x1.318
Pressure vessel - 40lit.:
10"x44"
Brine tank ØxH (mm.) - 40lit.:
340x1.160 - capacity salt 100lit.
Dimensions ØxH (mm.) - 50lit.:
254x1.575
Pressure vessel - 50lit.:
10"x54"
Brine tank ØxH (mm.) - 50lit.:
530x800 - capacity salt 150lit.
Dimensions ØxH (mm.) - 60lit.:
254x1.722
Pressure vessel - 60lit.:
12"x48"
Brine tank ØxH (mm.) - 60lit.:
530x800 - capacity salt 150lit.
Dimensions ØxH (mm.) - 70lit.:
330x1.580
Pressure vessel - 70lit.:
13"x54"
Brine tank ØxH (mm.) - 70lit.:
530x800 - capacity salt 150lit.
Dimensions ØxH (mm.) - 75lit.:
330x1.580
Pressure vessel - 75lit.:
13"x54"
Pressure vessel - 75lit.:
530x800 - capacity salt 150lit.
Dimensions ØxH (mm.) - 80lit.:
330x1.575
Pressure vessel - 80lit.:
13"x54"
Brine tank ØxH (mm.) - 80lit.:
530x1.050 - capacity salt 200lit.
000092
Sold by the meter.
Features:
- Roll lenght: 50m. (164ft.);
- OD 12,5mm. (1/2");
- Flexible;
- Anti alga;
- Operating temperatures from -10°C to 40°C;
- Pressure 8 Bar;
- 8 years warranty.
000093
Sold by the meter.
Features:
- Roll lenght: 25m. (82ft.);
- OD 19mm. (3/4");
- Flexible;
- Anti alga;
- Operating temperatures from -10°C to 40°C;
- Pressure 8 Bar;
- 8 years warranty.
15000445
Detector for the salt level present in the softener brine tank. When the salt level is reaches the set limit, the weight will pull the lever down and trigger alarm.
- Easy installation, no tool needed. Simple and reliable.
- Battery-operated (2 AA alkaline batteries), low battery power alarm.
- Real-time monitors salt level.
- Low salt level alarm, 5 seconds every 15 minutes.
15000402
Replacement parts chlo active
Articles to assemble: J173-CPR16IS JG replacement O-ring OD tube 1/2" (x3pcs.) + S001-4200 Straight adaptor OD Tube - M. thread 3/8" x 3/8" (x2pcs.)
15000439
The brine valve have to be chosen based on the height of the pressure vessel installed in the water softener. In any case, the valves are suitable by adjusting the height to the pressure vessel used. Just follow the instructions below:
15000439-01:
Brine valve suitable for all the pressure vessels with height 17"
15000439-02:
Brine valve suitable for all the pressure vessels with height 35"
15000439-03:
Brine valve suitable for all the pressure vessels with height 44"
15000428
Thanks to the small grid on the float valve bottom, any infiltration of undissolved salt is reduced.
Bestsellers
Addolcitori acqua
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Most viewed